how to change the blue to red (using a brush in Color mode), but the problem is I want to make the whole ribbon solid red (the same look as the right-most stripe). Cloning the red part over the rest? tried painting with Multiply in the middle stripe and Color in the lefthand stripe, but that still gives me obvious distinctions where the stripes were.
View 1 RepliesColours are being over saturated in shaded areas and less saturated in light areas when filled over an aeea. The colours need to remain the same saturation level when darkened or lightened. Is a setting affecting the saturation levels?
View 12 Replies View Relatedhow to lighten a dark photo without causing a grainy appearance?
View 5 Replies View Related I have been using Duotone with my photos, but since the other day, everytime that I process a photo this way, when I convert then back to RGB mode, the dark (black) areas of the photo become a kind of bitmap of red pixels. I have tried with many different photos from RAW or JPEG files and I get the same result with all of them.
This is an example of the issue. The original is on the left. What may cause this? The photo looks good in duo tone. It is when converting to RGB when the corruption happens.
I am having a huge issue with Photoshop CS5.5. The gradients and colors are acting crazy. When I bring in a image with a gradient it gets black spots all in the dark areas. Even when I use the default gradient selection this is what happens. When I bring in a picture that should have a white background it turns to black. Now apparently, when I save it out as a JPEG saves correctly without the black line or messed up gradients. So it seems to only be an issue when I am working in Photoshop, the gradients appear messed up. What is wrong with my display?
View 2 Replies View Relatedthe lines that go diagonally.. one is light the next is dark.. how'd she do that?
View 4 Replies View RelatedI have a picture of a person I'm trying to alter. The person is wearing a very light yellow shirt and I am trying to replace the color with a more striking dark red. Also I'm trying to turn her skin a very pale white color (Like a geisha). I've been fiddling with the color replacement tool, but the best I've been able to get is a milky whitish red matching the light shade of the shirt. No matter what shade of red I use it always replaces the yellow with the same light red.
Is there a way to tell the color replacement tool to not keep the same light shade as the shirt and instead stay closer to the shade I've selected from the swatch?
I am simply using this image as practice ( since I already have a goal image made by someone else ) The Origin Image is the original image, the goal is the image I am trying to reach near, or identical too in terms of color scheme. The Current Modified image is my modifications done to the "Origin" image to look like the "Goal" image.
Okay a few problems and I'm kind of stumped... is there any kind of wacky photoshop trick to get the ears and tails to match the goal image, without actually redoing shading and losing the image quality?
The colors of the ears and tail on the origin image are reversed on the goal image.
Did I do well on modifying her bathing suit?
Why bother providing an "Antialias Guides and Paths" setting if it's going to look this bad when projected on a dark background? Yes, this is with that setting ENABLED:
It's not quite as unacceptably nasty when the path is dark on a light background, but it's still a good ways off perfection! If Photoshop should not be held accountable for being pixel-perfect, what application should be? This is not even close enough for government work!
Here's the PSD file with which you can generate the above if you'd like to reproduce the appearance shown...
[URL]
Edit: Just to show that it can be done well, consider these two images, which I did by stroking the path in linear space.
I really like the effect in this poster. I see this effect all the time taking one color and making it light and dark in different areas. Like the banner on this site, but can never do it myself.
View 7 Replies View RelatedI finish editing my pictures, save as PSD and a 2nd as jpeg. i view the picture in windows live gallery (windows 7 64bit) and it has changed to a dark deep contrast.
I open the jpeg or the PSD file and they both appear as i originally saved them until I select/ click on it. and i get the darker deep contrasted image.
I have tried to have Photoshop elements 9, in preferences set to windows color and I tried it at Adobe no difference.
Jpegs are saved as sRGB but it is affecting all images, fine while editing but when saved and reviewed it changes and when opened i get to different contrasting views of the same image when selected. This is really anoying me as you think your done and it looks completely different when you review it.
How can I change with photoshop the color of below pencil from dark green to light green similar to the one in same photo? URL....Usually I use Tonality/saturation with good effect but with this special green I don't find a good solution.
View 2 Replies View Related1.) When moving the the dark or light value sliders, why does it also move the midrange slider? Aren't midrange values independent of light or dark values?
2.) I understand that every histogram is different and there is no right histogram. With that said, it does show if an image is too dark or too light and if I am just aiming for a good balance I am dragging the white slider to the left to lighten it up, and I am dragging it to where the histogram is just touching the bottom. Is there also some guideline to follow for the midrange slider where I can look at the histogram and determine which way to drag the slider?
I am very torn about the layers palette. I love that layer via copy will respond to groups as well as individual layers but I hate the color. I find it much more difficult to quickly find what I am looking for with the names and info inverted on a black background.
It is also more difficult to see the separation between layers and tell when one ends with its effects. Overall I feel my productivity regarding the layers palette has slowed down and become more frustrating. Everything else seems to be great. Is there a way I can convert over to a light toned color palette instead of a dark one?
I switched from Photoshop Elements 7 to Photoshop Elements 10. I cannot get a print of a photo that matches the screen. Photos are dark and red. I cannot edit the photos because I do not know what will print out. I have switched back to Photoshop 7 and my photos print fine, just as they have been edited.
View 3 Replies View RelatedI am trying to get the light blue bow to look as the other bows (dark blue) When I use the color replacement tool and sample the color from the dark blue bow and try to paint the light blue bow it just wont work..it color it with light gray instead of dark blue that I sampled.
View 9 Replies View RelatedI've got an image with two types of sand in it (light and dark), and I need to try and quantify the quantities of each for a project. Using the threshold tool seems to isolate the two (luminosity, black = 150), but I can't figure out how to tell how much of each color (white and black) there are.
I'm going through the list of plugins, but I'm not seeing anything (perhaps I don't know what to look for though).
I'm working on a drawing for a part and am getting annoying flickers from light to dark. What I am seeing happening is that everytime I pan or zoom (in or out) the drawing, the drawing lights up, and remains lit up until I move my mouse cursor over a view. When I do so, the entire drawing turns dark and remains dark until I pan/zoom the drawing again. So I am getting a constant dark - light flicker that I find very distracting.
I am only seeing this in this one drawing, however I do remember having this problem previously. In other drawings I have done, they will either be light (which I correspond to being normal) or the entire drawing will be dark. This I read has to do with the lighting in the source part file, but it never really bothered me.
Im on 2012 Iventor Pro, and Windows 7 Pro. 64bit with SP1.
Am a very recent purchaser of Pro X6, and was wondering the best way to separate or 'lift' the darker areas of an image from lighter areas. I have attached an image as an example. Ideally, I'd like to separate entirely everything in the image that is yellow, from everything that is not.
View 14 Replies View RelatedWhat difference does it make if the active layer is highlight in dark blue or light blue?
I should know this by now!
as a user of pse 6 I 'm used to work with darkgrey background in the organizer.
This works perfectly for quickly assessing brightness and contrast of pictures.
In pse 10 however I could not find any button to change the preset lightgrey background colour to darkgrey.
How do I change the default toolbar background from dark gray to light gray in illustrator CS6? In the older versions, the toolbar backgrounds were light gray. It easier to read on light gray backgrounds. THe same question applies to Photoshop CS6. InDesign CS6 has light gray backgrounds.
View 1 Replies View RelatedI'll make the important parts bold.
View 3 Replies View RelatedMy friend has taken some engagement photographs and unfortunately the couple have dark hair and the background is also dark - I think you can see her problem with the photos. Somehow the background needs to be lightened and neither of us know how (we both have Photoshop 7)
View 4 Replies View RelatedWhat is the difference between rooms and areas? Why create an area schedule off 'areas' as opposed to using 'room' areas? Can you create a schedule off room areas?
View 2 Replies View RelatedIn the image below I have an aerial photo of an Island. I need to make it so as water areas are black and land areas are white (not greyscale) almost like a silhouette. My first plan was to draw round the island with a black paint brush and then use the "bucket fill" with a suitable threshold to fill all of the areas up to the black outline with black, however this doesn't work as the bucket fill either breaks through the black line or when I reduce the threshold, doesn't color the water areas solidly.
View 3 Replies View RelatedI have a drawing (autocad 2011) ,which i have to measure the areas of the many rooms and i arrange these areas in a table! is there any fast way to do so? avoiding the boaring typical area measurements room by room?
View 9 Replies View RelatedMA.JPG
why i can't not match properties (MP) multileader texts, as you can see on the pic, i want the Mleader text on the right to be the same size as on the left, they are in the same layer, same mleader style but when click MP to match with the one on the left, nothing happen?
I am trying to animate a casino-like light board made of tens of light bulbs/leds. I thought the easiest way to do it would be creating a matrix of bulbs arranged by material ID and then design a pattern in multi sub-object materiel so I could somehow scrub through it and achieve animation effect. The material modifier allows to change ID for the whole object only and MaterialByElement shuffle ID`s in a random manner.
[URL]
I am attempting to build a facsimilie enigma machine, I would like to know how best to create an effect so that when a key is pressed a corresponding letter appears to light up. Btw I am not looking for an animated image, I can take care of the transitions between on and off, I just need to create the two image states.
Attached Thumbnails
How do you lock the pivot point of a light to the light itself? I thought just adding a Axis node would move the light and pivot point but the pivot does not move. Is there a way of parenting them together?
View 2 Replies View Related