The item is in full color on Illustrator as im designing it...
as soon as I Drag it over to photoshop it renders it in a diffrent mode...and blacks the image out leaving 1 color.
I am in the same mode in both documents.
02/06/13 - This has been fixed in the latest update (15.2.0.12)
In no apparent pattern, MAP mode displays completely incorrect locations for my photos.
The same ones are mapped properly by Nikon View (attachment snap097).
One example is these coordinates:
Latitude:N 39d 12m 58.86s
Longitude:W 76d 31m 21.82s
Altitude:182.00m
Altitude Reference:Sea level
Which is right near the Frances Scott Key Bridge in Maryland, USA.
PSP displays it as somewhere off the west coast of Africa (attachment snap096)
Why is PS defaulting all layers to Vector Mask mode when I try to create any shape?
Eg: New File > New Layer > Draw a box ...boom ... layer has a vector mask applied to it
Why is it so ...?
As you would know...when this vector mask is applied... i cant just grab the paint bucket tool and fill the box...i have to disable the freaking mask...
In Corel Draw x5 how do I switch do vector mode?
View 5 Replies View RelatedFor some strange reason when I open a image and click on my text tool, my image goes into vector mode even when I have create mode set for floating or selection.
I had previously done work with vectoring and perhaps I set something that in now locked. I did reset all preferences, but am still having this problem. I don't have this problem in X3.
I'll omit the long background --- suffice it to say I did this once and need to do it again, but can't recall the toolchain / workflow I used.
I _think_ it was Macromedia FreeHand 8, and that I used a plug-in w/in that program, but I can't recall. Any way other than rendering the drawing as a half-toned bitmap and then tracing it? Or re-drawing the image on top of such a bitmap?
I've been using Illustrator since the late 80's but this request just now came up for the first time, twice in one day: the clients each want me to send them layered files (OK-no problem) wherein all the layers, even the raster layers, register as vector layers. Or at least all the layers, regardless of file-type (vector or raster) are contained within an unflattened Illustrator file. One of the clients specifically asked that the Type layer (No problem-all the type is on one layer) be "vector mapped", whatever that means, while all the other layers can be Photoshop layers, if necessary. So how do I hand them an open, unflattened Illustrator file containing both vector art and raster art? Can it be done in Acrobat, as a PDF? I'm working in AI and PS CS5, but I can and will upgrade if I have to.
View 4 Replies View RelatedI have a picture that was sent to me when the picture is actually opened the original person blacked out parts of it and they do not show but whenever it is sitting in my folder the whole picture shows up as a thumbnail. Is there anyway to remove the black layers or anything to get the whole picture to show since it is all showing as a thumbnail?
View 2 Replies View RelatedI just installed PS6 and it looks awesome! Everything works fine, no issues processing photos so far. Only problem is that my drop down menus for the menu bar are blacked out with grey text. Some options don't even have the text. When I hover with my mouse, it does show the item with a blue hover background, but aside from that, nothing.
For some context:
i7-3770 3.4GHz
16gb Ram
1gb GPU - AMD Radeon 7570
Windows 7 64bit
I'm using Mac OSX and have just upgraded to CS4, from Illustrator 10. Our house style is a gaussian blur of 10 pixels, but it doesn't display correctly in CS4 - it's much thinner. I've had this problem before and just exported from CS4 then created the blur in Illustrator 10. On Wednesday last week I tried CS4 again and the blurs displayed at the correct size, then on Friday afternoon (I had used the blur tool successfully in the morning) it started making the blurs too thin again.
It's set to 100% on all the different projects with 10 pixel blur, so why are my gaussian blurs thinner in some and not others in CS4, but all the correct width in Illustrator 10? This is really frustrating as it would be such a waste of money not to be able to use CS4, and have to go back to Illustrator 10.
I have made a layout for an iPhone app in Illustrator. When I export an artboard with a size of 160 x 90 px to png with 326 ppi, the size ot the image I get out of it is 724 x 408 px with 326 ppi. Also if I copy and paste the object to Photoshop it has the same growth.
I'd like to make pixel-sharp design, so what is the best way to do it?
All of my navigation menus are completely blacked out with dark grey text on top. Certain menus are completely blacked out and show absolutely nothing. When I mouseover the text becomes a readable grey but it makes actions much more difficult as I have to mouse over every single option.
Are there any solutions to this bug?I have uninstalled/reinstalled, updated ATI drivers, contacted support, etc and have found no solution.I am using purchased Photoshop CS3 & I am running Win 7 x64 w /i5-3570k w/ ATI Sapphire 7950 Here are some screenshots of what happens:
Where is the option to get rid of the transparency/checkerboard background that displays on my Artboards in CS6?
View 2 Replies View RelatedI've upgraded to LR4 and, on loading my old LR3 catalogue, find that all my photos have turned black. Photos imported since the upgrade display properly.
View 3 Replies View RelatedI have AutoCAD map 3D 2011.My layout background is white, and sometimes the viewport(s) appear blacked out. I can plot fine, no problems there. It makes it hard to see what I have in my view port. I have removed the viewport and created a new one that will fix the problem approx. 50% of the time.What causes this?
View 6 Replies View RelatedI am using autocad architecture 2012; the problem i am having is that when i pdf any sheet that contains a block, the plot prints the block/symbol completely filled with color (black).
when i pdf, the client (commercial) demands that we use the "DWG to PDF" setting, however this causes text throughout the sheets to convert into unreadable dashed lines, therefore our office has started to use "Adobe PDF" for all our pdfing needs. but now the blocks (mainly the title block tags, and keynote symbols) do not plot properly. I always preview the sheet before pdfing and it always looks normal... it seems like the problem occurs somewhere between the file and adobe acrobat x... is it possible for the verison of adobe to be the culprit?
We recently upgraded to X5 and are having trouble with the Previews for JPEG. When I try to preview a jpeg under the standard cmyk setting it comes up as a black box. If I change it to RGB then I can see it. It didn't happen at first but once I downloaded the update it started.
View 4 Replies View RelatedI have encountered a problem when creating a PDF. On the sheet there are 14 viewports, and when I plot the sheet to a PDF, one of the viewports plots completely blacked out. I have redone the viewport and Xref, but it still turns out black.
View 2 Replies View RelatedSome images in threads are now showing up with the lower portion of the picture blacked out. Its like there is a limit on how large the image can be. Many times what the posting memeber is trying to show is blacked out.
View 9 Replies View RelatedI want to learn how to use Illustrator since most of my graphical knowledge is for photoshop and flash. Since Illustrator is a great vector program I'd like to learn how to make them. I've searched all over the internet for tutorials on how to use the program and to make vector art but I havnt been able to find any good tutorials. Can someone point me in the direction of some good tutorials on how to do vector art? Or if someone wants to write a tutorial on it ...
View 7 Replies View RelatedThis is really an Illy question directed to Sir Scott, but if anyone out there has some Illy prowess, please chime in. I'm referring to Scott's example in post #6 of this thread.
I can create a dot pattern, no problem, creating swatches, patterns, or using blends, but where I'm hitting the wall is the gradient effect. Tried opacity masks, but that doesn't cut it. One other question I have is, what technique would I use if I wanted an offset dot pattern, say 45°.
I have only just got into using illustrator, after using photoshop for ages and getting bored with it, I have just made a vector image taken from a stock photo >here< at the moment it consists of 4 layers, one background white layer, a layer which has all the colour fills on, a layer with the outlines on it, and a final layer with some touch ups.
I realise now I should have made it in a much bigger size as I have been working on it at 400% and then scaled it down again on the nav and it just looks pathetic.
is there a way of resizing it as it is? or would I have to mess around with different progs and file formats?
I have had a quick browse to see if theres a thread on this subject, but cant seem to see anything of use.
I have some text blocks in Illustrator CS 6 that display the red plus sign that indicates overset text but there is no overset text. It occurs in files that were created with earlier versions of Illustator and now we are reworking them. It can't be deleted. I have cut the text in the box and pasted it into a new text box to no avail. It is not a screen artifact. I have tried copying everything in the file and pasting it into a new file and the little red plus sign comes along. It doesn't print, of course.
View 2 Replies View RelatedWhenever I try to copy paste a vector from Illustrator (CS6 64) to Photoshop (CS6 64) I get the following error:
I'm on Windows 7 and have my Scratch disks set to non-system drives. Have checked permissions and nothing is Read Only.
I can paste as Shape and Shape Layer but not Pixels or Smart Object.
I used to be able to copy a shape in Illustrator, paste it in Photoshop, and then duplicate the shape layer, removing what I wanted from each layer.
Now that doesn't seem to work, and what's worse, strokes are all messed up - if I apply a stroke to the whole layer, it isn't all visible. If I delete parts of the layer that are unwanted, certain pieces remain invisible, even if I apply a stroke (and fill, for that matter).
How can i open up in Indesign or Illustrator photoshop's vector layer. If i pool out this object from Photoshop to Indesign or Illustrator this is rendering object. Why? It's vector object!
View 4 Replies View RelatedI'm on this project that i need to digitize an old artwork. It requires vector (AI) & shading (PS).
I have all line art done in AI. There's like 50 layers on it. The original artwork has "shading" and "highlight" on it used by Air brush.
I just want to import all the layers in photoshop at once. It will be time consuming if i do it one by one SO is there any way that I can transfer all the vector path from AI to PS?
I tried Meshtool and its hard to control. Unlike in Brush tool in PS, I got the freedom to adjust the opacity, softness, etc.
I am making myself a logo in photoshop. I have made all the letters that will be used, but they are all seperate entities as most of you who have used vectors know. I would like to interconnect the letters, as well as an angel I have made to go above the letters. My question is, how can I join two seperate vector images into one vector image. For example, joining a letter E with a letter D. I wonder if theres a way to do this without having to delete part of each image and then re-draw, which is a pain. Sorry if this isn't really clear, but its hard to explain.
View 4 Replies View RelatedIs this possible? I'm in Windows, Photoshop 7.0. I also have a pretty early version of Illustrator, not sure which one.
View 3 Replies View RelatedWhen we try to open smart objects from within Photoshop CC, they're looking for Illustrator CS6. On machines where Illustrator CS6 is uninstalled we get errors. All the file associations in Bridge are correctly set. Is there a way to change the file associations for smart objects?
View 2 Replies View RelatedPhotoshop CC (Newest update) crashes every time I double-click on a vector-layer created in Illustrator! It should automatically open the layer in Illustrator but all I see is the 'Wheel of Death'!?(OSX 10.8.4 - Adobe CC)
Crash-Log:
Date/Time: 2013-09-12 10:02:42 +0200
OS Version: 10.8.4 (Build 12E55)
Architecture: x86_64
Report Version: 11
[code]...
