Photoshop :: Precise Crop In Any Units That Avoids Interpolation
Jun 28, 2012
Is there a way to do a precise crop in any units that avoids interpolation. As far as I know entering a size in the input boxes, does not give a crop box of that size, as it does in the selection tool. The only accurate way that I can think of is to use guides to mark the crop and then use the crop tool. A bit primitive is it not?
Also can the guides be set by an input box? It is very difficult to pull them to the correct position, using the info box. I can only set 1000 and 4000, by zooming to 100% and then scrolling, otherwise the info box is too coarse. I suppose someone will say that CS6 addresses this!
View 7 Replies
ADVERTISEMENT
Sep 19, 2012
Croping by moving the mouse just is not working. Is there a way to crop more precisely? Putting in the measurements I want it to crop to would work.
View 5 Replies
View Related
Mar 18, 2011
I use Xara sometimes to resize images/photos. Quite often I use the clip view function to crop the image to the precise size I need.
I just recently found that when I export my clipped views, always as pngs, they have a very small 1 to 2 pixel edge around them. I can keep clipping but it continues to stay there. I exported with alpha and without to see if it made a difference but it doesn't.
I am now having to use my raster program to resize but had liked using Xara for it. The raster program works fine and I suppose every program has its uses so I just won't use Xara for photo clipping and exporting anymore. I just think that there shouldn't be an issue since Xara seems to want to handle photos more.
The attached images show extreme closeup of a blue image on a black background (the black background is used for checking this very problem).
View 6 Replies
View Related
Oct 12, 2013
When does PS use the image interpolation setting on the preferences window?
View 1 Replies
View Related
Jul 27, 2004
If I want to to print an image at a certain size in photoshop but do not want to have the image resampled up or down I can basically do this
1. go to image, resize and uncheck the resample image box and type in the resolution at which I want to print = lets use 300ppi just for kicks.
2. Now that will depending on the resolution of the image this will resize the photo the the max size that can be printed at that print resoultion- period. Then is the image is say 5x8 and I want to crop to 4x6 I can set the crop tool to 4x6 and leave the resolution fields blank, to crop with no resampling. Is this correct so far?
Now want I need to know is how do you do the math to figure out max print size from a given resolution- if I have an image that is 800x640 say- how do I convert that to inches to see the max size that can be printed without resampling- am I just dividing both fields by ppi?
View 3 Replies
View Related
Jun 5, 2008
to be sait i have picture 8*6 and 300ppi and i wont to scale this image to 12*10 and 300ppi with crop tool (not image size). my question it's: do photoshop now in this function make bicubic smoother for interpolation or he that's make asimple interpolation like bicubic?
View 6 Replies
View Related
Aug 23, 2012
Transforming Objects updated 8/6/12 and it still doesn't mention that in photoshop cs6 one can specify the interpolation method used for the transform in the tool options bar:
[URL]
View 1 Replies
View Related
Apr 12, 2008
genuine factals plugin is a part of Photoshop CS3? I note that a plugin for Photoshop (version not given) is advertised for sale by OnOneSoftware.
View 1 Replies
View Related
Oct 17, 2012
When I try to scale down a Smart Object, by using the Free Transform tool, I get over-sharped edges. Mind you when I do the same on a raster layer I can overcome it since there is an option box where I can choose interpolation method.
View 4 Replies
View Related
Jun 12, 2012
There's really no way to set the interpolation steps for the path of the Helix spline shape?
View 3 Replies
View Related
Oct 15, 2012
I have a helix spline that is pretty large. The larger I make it the more evident it is that it is made of segments. I can't find any place to adjust the interpolation. Is there any way to add more segments to smooth it out a bit?
Max 2014 (SP2)
Win 7 64-bit; Dual Xeon E5-2687W @ 3.10 GHz; 64 GB Ram
NVIDIA GeForce GTX 570; Quadro 4000
View 1 Replies
View Related
Aug 27, 2013
What is interpolation when scaling images in Gimp? it is under quality. I see there are None, Linear, Cubic, & Sinc (Lanczos 3)... what are these and which one is the best one?? and does it matter which one e.g. are they all the same?
View 7 Replies
View Related
Aug 21, 2012
way to animate the 'steps' parameter of a spline such as text? The effect I am trying to achieve is have the wireframe of a mesh (extruded text) get more detailed. I have tried subdivide but it is not the same.
View 2 Replies
View Related
Nov 15, 2012
If I generated FG maps with interpolation of every 3 frames and I use read FG points at every 2 frames. Would this be wasting my time? Would it be better if I just set it to 0? Once it starts rendering it comes up with warning signs saying it can't find specific FG maps which is understandable. Would max have to generate new ones (because this would be a waste of render time) and if it does can I somehow just tell it not to?
It is an animation that I am rendering (moving car and moving camera).
View 3 Replies
View Related
Sep 5, 2011
I've been trying to resize an image and tried Gimp 2's interpolation method but nothing happened. I increased the size to 150% with 153 pixels (I think). Did I do something wrong or is Gimp just not good for interpolation?
View 3 Replies
View Related
Nov 12, 2012
I cannot stand the CapsLock key. In fact, I modified my registry to remap the caps lock key to ALT-NumLock or something. But every time I use Photoshop, I have to be able to toggle the capslock key to enable disable precise cursors. So, then, I switch back to my primary app (InDesign, Illustrator, Dream weaver, anything ) and I type about 30 words before I realize I still had the CAPS Lock on.
there is a way to remap the precise cursor toggle to another key.
View 11 Replies
View Related
Apr 1, 2012
I've seen plenty of tutorials on the use of the Image > Adjustments > Replace Color... tool and in all of these tutorials, they will simply slide the hue slider to a color they wish to change to. I know that in the replacement section, a user can click the color box and choose a color from the swatches, even copy and pasting a specific hex code value.
This is great for web dev work where I need a precise hex color for an image. Problem is, this doesn't work. It seems to blend the new color with the existing one. What I find myself doing is more of an iterative process then: I'll use the eye-dropper tool on this blended color, then repeat the Replace Color steps again and again until I get something close to my intended new color.
View 3 Replies
View Related
Mar 25, 2005
i have heard that older versions of photoshop had a tool called "selection brush" wich i think would be much easier than the lasso or magic wand. is there any way that i can make a precise selection on an image (not being with the lasso or magic wand tools)?
View 5 Replies
View Related
May 22, 2013
I'm supposed to be designing copy using a specific color guide: C = 79.5, M = 50.4 etc etc.When I go to enter these values, Photoshop tells me I can only use whole numbers.
View 2 Replies
View Related
May 20, 2013
How do I remove the annoying white outline on the precise crosshair in Photoshop CS6?
View 4 Replies
View Related
Dec 17, 2012
My brush and dropper tips had changed when I opened the program today. I'm trying to switch from Precise to Normal. I've tried to change it through Preferences, but it seems that my changes won't save. I have Elements 10 and Windows 8.
View 4 Replies
View Related
Jul 1, 2013
I am a labtech at a community college and look after 48 mac pros in which the students use the entire creative suite. (I only mention this becuase any answers need to consider variations in system settings or photoshop settings. college students get into everything!)
But the issue is when you select the crop tool and enter a custom constraint and crop
The image size is sometimes a full 2 inches off of what you set as a crop?! I havn't run into this before
[I do know you can use the drop down box and use {size and resolution} but I want to know why it doesnt work under custom and unconstrained]
View 1 Replies
View Related
Jan 3, 2014
I am planning to use a 50fps timeline, but my camera does not support 50fps, so the next best thing I can do is 25fps. My understanding is that if I shoot with a 90 degree shutter at 25fps, then that is like shooting every second frame of native 180 degree shutter 50fps. I hope that is correct The question is, how do I get Premiere to interpolate the additional frames so I have a nice smooth 50fps finish? Do I need a plugin? I don't want the blending modes that just overlay adjacent frames. I'm looking for a solution that creates brand new frames with moving objects where they would have been, had the footage been shot at 180 degree 50fps in the first place.
View 1 Replies
View Related
May 28, 2007
using the crop tool to highlight a picture and crop the sides?
View 1 Replies
View Related
Jun 16, 2012
When creating surface profile Is civil 3D use interpolation to get elevation of unknown (points which not having elevation data) points?
Or just join elevations which have elevation data(input data)?
AutoCAD Civil 3D 2012 SP 2
View 2 Replies
View Related
Nov 17, 2013
Photoshop Crop won't complete when trying to crop an image. This just started a couple of days ago and I can't figure out what's going on with it. This happens in Photoshop CS6 and CC
View 6 Replies
View Related
Dec 1, 2013
How to get precise elevations at lowest and highest points. I need to get spots where the water flows and its precise elevation at that spot as analysis.
View 4 Replies
View Related
Apr 7, 2013
Is there a way to set a precise orthographic view - such as at 45 degrees. I need to render objects and take them into another application to dimension them so a set angle would be very useful.
View 1 Replies
View Related
Feb 6, 2014
I am setting up an artboard 7 x 3.375. When I enter the 3.375 Illustrator changes it to 3.38. Is there a way to change it so it keeps the exact dimensions I entered?
View 5 Replies
View Related
Jan 31, 2013
how do you enter a precise width to a paragraph without deforming it... if you rezise manualy it doesnt strech, but if you have for example a 180px width paragraph and enter 30px in transform box or properties bar it gets stretched.
I have some text boxes and need all to be same exact widths.
View 9 Replies
View Related
Jan 19, 2014
I am using Illustrator CS5 on a MacBook Pro running 10.9.1. When I make new objects their dimensions are not precise, although I am using the application bar to spec the sizes. When I use the built-in calculator function to resize the objects, the errors grow.
For example: rectangle, 7" x 10", intended size. RESULT: 7.0124" x 10.1251". This rectangle has no fill, its rule is 1'.
When I use the calculator to make it 1/9 of the intended size, the result I get should be 0.7778" x 1.111". Instead, the result is 0.0.7653 in x 1.108 in.
View 1 Replies
View Related
