how to get text into a point while keeping the bottom of the text flat like the image.
I'm trying to recreate that image to a higher standard for a mate of mine who runs that company, all he's got at the moment is that hideous thing I copied and pasted from a word doc he emailed me.
I'm trying to figure out a way to make the baseline of a line of text come to a point (rather than rounding off like an "arc lower") without using an envelope, in CS6.
Here's an example of what I'm talking about:
Brushes - I want a square pointed brush end for blocking out the background after using the magic wand. The round brush end does not work well on straight surfaces.
View 3 Replies View RelatedI am using photoshop elements 8 on a Windows 7 OS. My cursor often turns into 3 hands with the index finger pointed. Is this normal? How do I get it back to just a simple arrow?
View 3 Replies View RelatedI'm trying to make a smooth line with sharp and pointed tip. I use artistic media brush but it came like this (just sample)
View 13 Replies View RelatedIn the previous versions of civil 3d 2012 or earlier, I never had a problem with the view cube not staying pointed to the north. Since I never touched it in the past, how do I get it to stay pointed to the north?
View 7 Replies View RelatedI would like to know how to create the shadow effect as pointed with the red arrow, if this design is to be printed to 2 spot color (Orange 021 C and Black)
View 11 Replies View Relatedtrying to copy txt from an outside text editor and pasting them into an open, editable text layer in my workspace. The problem is that I can COPY the text fine, but when I click over to PS to paste it into the open editable text layer it either pastes the previous text from my clipboard OR it won't paste anything at all. I can then go into any other text field on a browser, spreadsheet document, a different text editor, notepad, etc and successfully paste the proper batch of text I wanted to paste into PS. Sometimes I have some rather large files open 50+megs when I notice this happen. I have to save my work and close out entirely of PS and then open it again before I can begin editing my original document again and successfully paste the text into the open editable text layer. This may last for a few COPY/PASTE sessions of additional text in additional text layers, but then begins displaying the symptoms I described above.
I am on Win7 on an AlienWare M17XR3 laptop with 16G RAM and AMD Radeon HD 6900M Series display adapter.I assume it's either in my PS performance settings which I have PS using 10413MB RAM and has over 350G scratch disk space. If it's not that I guess my laptop system performance settings which I've never tinkered with since I purchased it.
Using CS 2 on Win XP
Simple question:
am trying to edit a text layer but i am unable to open the text box to change text.
It creates a new text layer everytime i click on the layer.
Text is allowed only on the outside of a rectangle shape. The text cursor disappears when I try to enter it into the rectangle and when I place it on the edge of the rectangle, it rurns into a slanted "A" and allows texting on the border of the rectangle. Corel Paint Shop Photo Pro X3 (build date Sept 7, 2010). This software came with my new HP Pavilion dv7.
View 1 Replies View RelatedWhen you centrally allign text horizontally and vertically in a text box, the text sits slightly high of the centre. Is there any way of setting an action or setting to deal with this rather than adjusting by eye every time?
View 4 Replies View RelatedI have designed a C# application to To Print I Cards Of School. Here I am sending data from my application to a CDR FILE (Already Created ) Which Contains ADDRESS Text Field..Now I Need to Print Address(which contains 60 characters or more) on this Text field .
I Have Used The following c# Code.. To Replace Address text field that contains text 'Address '.....
s.Text.Replace('Address',"Text To be replaced .......")...here s is Active shape...
This Works Fine But How can i WRAP TEXT....of Address field.
When I insert text with either the TEXT command or MTEXT command, the text is displayed mirrored. This doesn't seem to have anything to do with the MIRRTEXT variable because that is used when I'm actually mirroring the text. In my case, the text is mirrored as soon as I insert it. How can I get it back to normal? Is there a variable I'm missing?
I'm using AutoCAD LT 2012 .
i switched gimp 2.6 to 2.8 and new text tool behaves strangely, as i remember in gimp 2.6 when i try to change text content with selecting old text and pasting new text i could use same text size and same font with my old text without doing anything but now in the gim 2.8 whenever i try to change content of a text layer i need to choose again font and text size from toolbox options, but why do i have to do this, i have a text placed on my image with a certain font and certain font size and i just want to alter my text conten not the size of text or font , it changes automatically to back text size and font whatever i used last time in another work.
summary: i want to change my text content without setting my font and font size properties, i want to use my text layers old properties
Using CS5, dropdowns are black, gray text, some positions require hover to see text. How to fix?
View 1 Replies View RelatedAny ideas how ot fix this? Every time I try to enter text, the edges of the text is surrounded/selected with lines going around it....how do I stop that and have it stop turning my image red (Its supose to be brown, until I click it then it turns red), it isnt even using the correct colors that I set it at.
View 2 Replies View Relatedwhen entering text, mega spaces seem to be a default between lines of text. Changing the leading does nothing to correct this. Thinking that my software became corrupted, I deactivated and reinstalled. But the problem persists. If I type the text into Word, cut and paste into PSE10, the problem continues.
View 1 Replies View RelatedRunning PSE 9 under Mac Snow Leopard.
I have a family photo including many text layers. I'm trying to edit the text in a selected large multi-line text layer. I'm following the steps from the appropriate PSE article, but I always end up creating a new layer and the red/green no-go/go option. I thought I should just be able to double-click the text layer and start editing.
When attempting to add text to a photo, the typed text is not visible on the layer in the "Layers Box" until exiting the Text Tool. Text nexer is visible on the photo Background image. If the edited image is saved, the added typed text is not saved; only the original Background image. How do I reset the Text Tool so it will be functional?
View 3 Replies View RelatedUsing Elements 9 I was adding black text to a .jpg image. Somehow during the process, the text being entered defaulted to a "wavy, illegible set of characters". Spent 30+ minutes looking at FAQs and have given up. I want to reset to default simple clear black characters. Closing and restarting Elements does not resolve this issue. When ending a newly entered set of text - still get "wavy, illegible set of characters!"
View 6 Replies View RelatedI've got some Text Layers in my CS6 document.
In CS5, if I had Text Layers and changed the text on the layer (by double-clicking the "T" icon of the specific Layer in the Layers palette), the name of the Layer would change to reflect the new text I entered.
For some reason this behavior is gone in CS6. So, for example:
• I have a Text Layer with the word "Email" on my canvas. The Text Layer name also reads "Email".
• I double-click the "T" icon of the Email Layer to edit the text on canvas.
• I enter new text, "Contact". The text on canvas updates to "Contact", but the Layer Name remains "Email".
So, for accurate Layer names, I find myself having to change the text twice: once on the canvas, and then manually updating the Layer name as well. Is there an option or preference somewhere that I'm missing that would re-enable the behavior from CS5?
Is there a way to export text from InDesign to Photoshop and preserve the type as editable text in an area text box, similar to the export to PSD in Illustrator? Designed many web site pages in InDesign, and now need to covert all pages over to Photoshop quickly.
View 4 Replies View RelatedI'm having this strange issue with the Photoshop type tool in Photoshop CS5. It might be, although I'm not sure, a bug. The tool itself is working and lets me add text and edit. But the box that shows up when editing text (and the blinking line that shows where I am in the text) - has gone invisible. I am having this issue in only one document. - I tested the type tool on other documents, and everything was normal. I've looked up shotcuts and hotkeys to check if I've tapped a key or something, but it doesn't appear to be so.
Now about the document; it does have quite the amount of text layers, and a lot of text in them. I've tried resetting the type tool, and I've restarted the program.
When I restart the program, the tool works as it's supposed to - but after editing or adding a new text layer, the editing area is gone again! Is this a bug, or have I touched keys that do odd things?
Photoshop CC up to date
5 years PS experience
Restart of file and PS didn't resolve the issue
Creating Smart Object didn't resolve issue
When attempting to add simple text on an individual layer, the layer is turning black. This prevents me from seeing the text I'm editing. When I move to another layer the text displays correctly. When I go to edit the text by clicking the image the layer goes black again. It is like editing text in the dark, turning the light on to see the changes, turning the light off to make the changes, repeat.
I'm wanting to create transparent text over a picture with only the outline of the text showing. So basically, I need to only see the stroke of the text and have be picture show thru from behind.
View 9 Replies View RelatedI am creating subway art and am creating various templates. I would like it so that when I have a text box with a 5 letter word, and I want to enter a longer word, they all fit and just kind of smush together rather than me having to fix the text boxes constantly.
View 4 Replies View RelatedI need to produce a text logo with the first half of the canvas background black with white text, and the second half white with black text. Do I split the background or join two individual canvases together ............ or something else?
View 3 Replies View RelatedIn a layout for an ebook I have some important black and white bitmap illustrations in tiff., 300 dpi. These have appeared ok on print, but on screen, reading the same pdf-file, they're unacceptable, especially some texts in fontsize 5-6 pt are unclear. I have to convert the drawings, or at least the texts, to vector graphics. Can I open these tiff.s in Photoshop, change only the texts to vector graphics and then save in a format, that can be inserted in the Word2010 layout?
View 2 Replies View RelatedI am setting a book in Indesign CS2.I use "Text frame options" > align > justify on all my pages. On a page that was so justified, I inserted a picture using the "text wrap". Soon as I did, the text stopped being aligned along the foot of the page (which looks rotten, because the facing page is justified and so the spread is now no longer aligned.
I tried to I use "Text frame options" > align > justify again, but now the option to align is now greyed out.
how do I insert text faster? Attached is a screen capture of my set-up. I am bulding a plaque. how to set up "pre-determined" text fields that populate from an internal or external text? Right now I have to >duplicate layer>drag layer to new spot>enter in new text. It would be really neat if PS could populate from a file like web-site populate pages from other text files.
View 9 Replies View RelatedI was working on a project and I had recently installed a new font. Now all of a sudden whenever I make a new text box and type some text in nothing shows up. I can only see a tiny black line which isn't even text, even tho its set to 36ft. I changed the font and size to see if it made a difference, and nothing worked. I restarted PS and my computer several times, and still the same thing...
View 4 Replies View Related
