When I go to save my files as a .PNG, .JPG, or any other file type (minus PSD), the images come out way too bright. But just by looking at the shortcut to the image, it looks exactly the same as it does in Photoshop. I'm currently having it at RGB Mode and 8 bit/channel settings. I've tried to mess around with the Color Management settings but with no luck.
View 1 RepliesWhy do images opened in CR coming with PS CC always show 2 EV to bright? The same images opened with CR coming with my PS CS6 on another machine open almost perfect every time.
View 1 Replies View RelatedI'm doing some work in photoshop, well, more like fooling around with Photoshop. But when I'm all done with a picture, save it as Jpg and upload the image, its about 25%-50% smaller then what the original psd is ....
View 2 Replies View RelatedHow do I check to see if jpg images have been saved at a resolution of 300 dpi?
What if my original jpg image resolution is less than 300 dpi and I require 300 dpi; Is it possible to resave them to a smaller image size and in doing so increase the dpi?
What if a jpg image says it is ‘.jpg @ 25%RGB’ and I am supposed to save the files in CMYK; What is this ‘Mode’ setting and can it be changed through resaving the jpg somehow, or is it changed to CMYK when you open it in Photoshop and choose CMYK in the'Rasterize Generic PDF Format' window?
I am using XP and Photoshop 7.
I often open multiple images to make several changes, then use Close All and when it prompts "Do you want to save changes to ... before closing?" I check off the box to "Apply to all" and say Yes.  This saves lots of time when adjusting several multi-hundred MB images. Imagine my surprise today when it closed an image without saving! I had to repeat about 30 minutes of work as a result.Â
Â
I thought I had somehow accidentally clicked "No" to saving, so I made sure to pay close attention the next few times I used Close All to save work. It worked fine until a moment ago when it did it again.
I opened and modified several JPEG images with Photoshop CS2. Now none of these files can be opened by Photoshop or any other program. All of the files seem to have a non-zero size, but when I try to open them in Photoshop, it does not generate an error, it merely offers to create a new file with the same image properties (size, etc) as the saved image on disk.
I've also tried several other programs to open these files, and none of them can open them. FYI, one thing that all of the files have in common is that they are all saved with the absolute minimum compression settings.
I have been using Elements 9 for more than a year. Today it started doing something crazy. When I edit a photo (did this using "guided edit"), instead of saving the edited version (in a version set), all I get is a grey screen with an hour glass. When I go to my hard drive, I find both the original and the edited version saved, but it no longer shows up in Organizer.
View 5 Replies View Relatedmy default process is Adobe RGB. If I save a RAW image (Nikon D200) as a jpeg after adjustments in PS5.5, and I uncheck the "save as Adobe RGB" box, will the image be saved as an sRGB jpeg?
View 4 Replies View RelatedI recently saved an image on Photoshop CS6 as a PNG file so I could send it as an attachment to a client (who uses a Windows computer). They told me the file wouldn't open and instead showed as an "Unknown File".
Â
I tried opening the file on my Windows computer, as well as a JPEG version to test out, but both came up as "Unknown Files".
Â
The only way I could transfer the files I saved in Photoshop was to export them as PNG through the 'Preview' application.
Â
Is there a reason why these normal formats won't open properly?
I am trying to optimize some images for web to have a smaller file size. I am using "Save for Web" feature, and every time I try to save a file, the actual file output size is a lot bigger than the size it shows on the "Save for Web" dialog.
For example, I have a 607 bytes .gif, when I open "Save for Web" it shows 207 bytes for 16-colors but when I save it the output file is 1.22 kb.
When saving images in CS6 I can see them as preview icons of the image in finder by itself, but if I open a file in photoshop to find an image, i only have titles and not the images. ALSO when I go to upload an image to blog or facebook, again I have no image icon of what is there, only a blank space and a file name. I HATE THIS as it makes it takes too much time to figure out where the picture is. I am a graphic artist and a painter and I cannot work like this. Does not matter what type of file.. tiff, png, jpg etc... there is no image to see when opening through photoshop or any upload situation. I am able to see the images from FINDER by itself or if I am placing them into MUSE or INDESIGN.Â
Â
Why I cannot see them to load on blogger or facebook or to open them in photoshop.
Â
Mac OS X lion 10.7.4  NVIDIA GEforce 7300 GI 256 MB    2x2.66 GHx Daul Core Intel xcon  10 GB 667 mhz ddr2 fbdimm
Images opening from LR to PS6 are opened as CR2 files (canon) and then saved in PS - the resulting saved images are PSD files. These files are not added to the LR catalog without re-importing them. This behavior is different than it was in CS5 - in CS5 they are opened as PSD and immediately added to the LR catalog. I want the same bahavior in CS6. In LR I have set preferences to open files as PSD but they are not PSD until they are saved in PS.
View 9 Replies View RelatedI removed color info and reset to greyscale, yet I still get a pink hue when I save as a pdf.
View 4 Replies View RelatedI'm trying to create a new logo and now that I've created it, I try to save it and once saved, It looks very blurry/fuzzy. But in illustrator it looks excellent! It's just in the saved copy that looks horrible. I'm just metally drained and don't know to do
Â
-Illustrator CC
-Macbook Pro Retina -late 2013
Â
I've tried every possible format just about for the logo to be saved as. Even in the browser preview mode in save for web, it looks horrible. I'm needing this logo to be saved as jpeg, png, or something relative.
I have created a saved book in LR4. I saved it not because I had finished but because I wanted to protect my work to date. Now I cannot add new images, although I can work with (move and remove) the existing images in the book.
View 1 Replies View RelatedI plugged canon 1D mark IV with LR 4.3 for tether shooting. it works great. However, I realized that there is no image save on my CF card. All images were transferred to the computer via tethering. I really want to keep a copy of the card for logistics reason. I couldn't find any setting on LR preference regarding this.
View 8 Replies View RelatedI created a book in Lightroom using images in a Collection totalling 105 images. I saved a layout containing 26 images. Now I'd like to add more images to the saved layout.
View 1 Replies View RelatedI prepared a rough draft of a book and saved it with the tab on the right hand top of the main screen. Unfortunately, I saved it with the option of only saving the used images from the original collection. Later I brought up the draft book and tried to add some additional images, but see that only the images already used in the book are available on the image strip at the bottom. I need to get other images which are in the original collection. Is there any way to do this? If not, is there a way to save the entire format of the book and then start over with the same format but with the original full collection as the source of images in the bottom strip?
View 2 Replies View RelatedI started a book the other day, knowing that it was going to be an ongoing project. When I was done working on it, I created the saved book and named it. I have no problems openning up the book from the collections. My issue is now that I saved it, it only shows the images that I used for the book in the film strip.
Â
When I select "ALL PHOTOGRAPHS" in the filmstrip window (while still in my previously saved book), it opens a new unsaved book.Â
Â
How do I keep my saved book open and get the rest of the images in my library in the filmstrip?
I have made a book within Lightroom 5 and saved it. Now gone back into it days later after needing to make an error change and now decided I want to add more images to it but from a different images folder but its not allowing me. I have tried dropping and dragging from the folder in library to the folder named within books but it just shows a circle symbol and doesn't work. I have tried to add through file and import but doesn't work, it just adds new pictures to my library but not to the book of images. I have tried adding through adding new category but same.
View 1 Replies View RelatedI've been trying to figure out for a while now how to get beautiful sparkly bright eyes in photoshop. I've come a little ways with sharpening them and using the dodge & burn tools, but look at the eyes on this photo.
The look almost digital?
but still they're normal enough to be passed off in this photo. I've searched through google and tutorial sites to find this and I can't find anything worth while.
ive tried this one and failed really bad...
View 8 Replies View RelatedMight have been a great pic with the sunset in the background and some gold on the faces but that sun is just way to bright. I've tried several tricks but I am so unexperienced that every time when i'm trying to adjust it the whole image gets affected and looks screwed up. When the area is selected it becomes too visible that it was edited. how i can make that sun to shine softer and not to distract attention from the faces?
View 4 Replies View Relatedhow there is Proof Setup preview modes under the View menu. Can I create a custom preview mode so that when I choose it and press Ctrl + y it shows the image very bright without changing it.I need this because I want to see and edit more details in the dark areas which I may not be seeing on my monitor or room lighting conditions and thus to create images with more rich and dynamic shading in the darks so when viewed on brighter monitors or when levels are eventually changed the darks reveal nice shading instead of flat black.I'm looking for per image solution that doesn't affect other images or applications like using global gamma.
View 5 Replies View Relatedway to producing this effect.
I mean is the "bright effect".
I want to darken the background (sky) as it is too bright?
View 4 Replies View RelatedSo I start to work on something in Photoshop CS6 and suddenly certain colors don't show up right. Specifically bright bright blues and greens show as black. It seems to work in 32-bit RGB, but these colors have worked fine in standard 8-bit and I've worked with them before. Thumbnails, color picker, and saving for web seem to load the colors just fine. From what I can tell, in this random range it goes to black with saturation hits 100 in the color picker.
Attached is a screenshot. The circle is supposed to be bright blue (00d4f6) and the central rounded square is supposed to be Twitter's blue. both don't show up except for some slight coloring on the edges.
I have limited knowledge of HDR pro, however I have used it without these extra patches of colour appearing and when I tried to recreate an image which had been succesful these patches of colour are appearing.I suspect I have changed something but I can not work out what.
View 6 Replies View RelatedWhen opening a photo with some bright yellows in the foreground, the yellows all become "hot", and show up like it's some sort of a filter being applied. This is making it impossible to work with the photo & make adjustments in the Camera RAW lab. The same thing does not happen when the photo is opened to "edit" directly (versus working with it in Camera RAW lab).Â
View 3 Replies View RelatedI've been using Photoshop for awhile now, but have just recently run into this issue. When I try to use a bright color, it doesn't work - it just automatically adjusts itself to different shade. Now, I figure this is an issue with my color setting, but I can't figure it out.
Â
I attached an image of what I''m talking about below. You can see that although I've chosen to a bright green - it shows up much differently.
I added 3 different Hue Saturation Layer(s), colors Red, Yellow, and Green -Â split in 3, to a concrete image, in Photoshop. I am trying to get a really bright, sunny yellow color, however I can only get light yellow Hue Saturation Layer. How to adjust Hue for bright yellow (sunny) color?
View 2 Replies View Related