Photoshop :: Photoshop CS2 Periodically Resets...
Aug 28, 2008
Periodically Photoshop CS2 seems to completely reset itself as if I had just installed it for the first time. Mind you, I have everything customized just the way I like it, so every time this happens, even though I've saved my Workspace, it still comes up with annoying dialog boxes (Delete this layer?) so I have to reorganize again.
Has this happened to anyone else? I'm running Windows XP, 2 GB of RAM and lots of hard drive space left over.
View 2 Replies
ADVERTISEMENT
May 22, 2012
I"m using LT2011 on a WIN7 machine.After blockedit the cursor will freeze for a short period about every 2 seconds.When this is happening, there are also more disk accesses.
Re-starting the application stops this frustrating behaviour until I edit another block.Are there any updates that may deal with this problem?
View 7 Replies
View Related
Jun 7, 2012
a user i work with reports that during some commands (not the same) on some jobs his contextual menu dispears.
I've already run the recommended "UIreset" process a few timesI've updated his graphics card drivers to the certified drivers for that card.he has a robust windows 7 64 bit setup. His latest example was in the DI command the context menu dispeared that lets him controls linear/alinghed etc etc.
View 2 Replies
View Related
Sep 14, 2011
As a very long time user of Paint Shop (back to the early JASC days) and using the program primarily for producing bmp and jpg files with lots of graphics, an irritation in later versions has been the need to 'flatten' the layers periodically while working on an image. In past versions (don't remember how far past) one could set defaults such that you automatically worked in a single layer. I don't specifically remember how this was done (only that it could be done) and have not 'rediscovered' how to do it in my current X3 version and assume it will be the same in my (on order) X4. Is there a way to default into single layer work?
BTW: I strongly second the dislike of the graphite color scheme so certainly hope X4 gets 'fixed' to allow one to get rid of it.
I also note that after using the pop-up that appeared in X3 startup to order X4, my X3 became inoperable and had to reload it!
View 2 Replies
View Related
Apr 19, 2009
I start Photoshop CS3 some of the preferences set themselves back to default even though I set them to soemething else the last time I opened it. What annoys me the most is the navigator window which resizes itself every time.
View 8 Replies
View Related
Sep 24, 2012
My monitor is calibrated with Spyder2. Every time when I start Photoshop and open file (new or existing) my calibration info is gone. I have to apply color calibration for my monitor again. Why Photoshop resets my monitors color calibration info and how can I avoid this?
View 10 Replies
View Related
Jul 25, 2008
when I start my Photoshop, everything resets to the default settings, from workspace to general preferences. Why does it do this and is there a way to stop it from doing it?
View 7 Replies
View Related
Mar 18, 2013
every time I restart my PC, the layout in Bridge resets. Starting Bridge as an Admin doesn't work.
I'm running Photoshop/Bridge CS6 on Windows 8 (64bit)
I put in two screenshots to show the before and after:
It isn't a big deal, but it's annoying to reposition everything after every restart
View 6 Replies
View Related
Dec 11, 2012
I'm creating an animated gif from a video clip (cinemagraph). In order to acheive the effect I need, I need to move each layer with the move tool to get an object to stay in the same position. I have gone through layer by layer and used the move tool to move the contents of each layer. When I play the animation I see the layers in the position I put them in. I stop playing the animation the contents of each layer snap back to their original positions. I have tried using the lock tools (both lock position and lock all) but they don't make a difference. why layer positions would reset when creating animations and how to get it to stop?
View 6 Replies
View Related
May 16, 2013
My Lightroom 4 reset itself last night to the original - all customization, presets I created and purchased, all images are gone.
View 7 Replies
View Related
May 28, 2013
Since I started with the 2014 version of 3dsmax Design I have serious troubles with the Viewport Clipping settings. The yellow arrows 'resets' about 90 percent of the times when I change viewport and sometimes also when I attach objects together. Ideally the top arrow should be below the top yellow line in the viewport setting and the lower one above. What I mean by that they 'resets' is that the top one for no reason goes all the way to the top and the lower goes all the way to the bottom. The result is a very weird looking viewport. Sometimes both goes to the top or bottom and the whole scene is invisible.
If I had been new with 3dsmax I had given up a long time ago not understanding why my hole scene either disappears completely or looks weird. I consider going back to 2012 now since its frustrating adjusting the clipping arrows every minute. Slows down my work.
View 2 Replies
View Related
Apr 28, 2012
For some odd reason Autocad will not maintain my workspace customizations. For example I typically can customize my workspace by toggling which toolbars are shown and where they are placed. Then I can close autocad and when I start it again all the customizations are present. Now when I start autocad it loads the default workspace. I should have to customize my workspace every time I start autocad. I also shouldn't have to create any custom workspace profile or anything like that. AutoCad used to simply save any GUI customizations made automatically. I need it to get back to that.
View 9 Replies
View Related
Oct 13, 2011
direc3d 9 resets to defaults. annoying, everytime i start max- have to set to my prefferences (anisotroping and texture sizes)
direct3d 10 "display all triangle edges" on/off makes no effect, i still see all triangles, that confuses "use cashed drdx meshes" removes those triangles but they appear entering polygon editing on some files those two checkboxes seems to have no effect at all, i see lots of triangles i dont want or need to see
mobile ati radeon 5650 latest drivers,
8gb ram,
intel i5 cpu (swithcable graphics, yes, i work with ati graphics card! not intel
max 2011 64bit design SP2
win 7 64bit
View 2 Replies
View Related
Jul 26, 2011
I finally installed Revit 2012. The first order of business was customizing the QAT to include everything I regularly use, and appear below the ribbon.
However, everytime I close/reopen the program, it resets and loses everything. It was not an issue in 2011.
View 3 Replies
View Related
Dec 13, 2013
Running Autocad Architecture 2014:
I am running into a problem, I like to use the annotative line type scale when I open the drawing i have to set the MSLTS to (0), and PSLTS to (0), LTS is already at (0). When I set these settings then save the drawing (saves as autocad 2013 version), close it down and re-open it the MSLTS and PSLTS settings reset back to (0). I've tried everything to get these settings to save but nothing works.
I want to keep these settings MSLTS (1), PSLTS (1), and LTS (1), after a save and re open they reset to (0)
View 2 Replies
View Related
Apr 11, 2013
Every time I open a new drawing(without closing AutoCAD) my workspace resets ea time and I lose all toolbars and settings.
Using AutoCAD 2012
View 4 Replies
View Related
Jan 26, 2011
Opening an old file LTSCALE every time resets to 100 instead of 1.
We tested MEASUREMENT and MEASUREINIT but this problem keeps coming back.
It happens on my colleagues computer not mine!
Is there some system variables set locally causing this only on some computers?
View 6 Replies
View Related
Jun 5, 2013
I am able to customize my quick access toolbar in Inventor 2014; however, when I close Inventor and re-open it again the quick access toolbar has been reset to what it was before. For example I will add "open from vault" and/or "iProperties" options to the QA toolbar but when I re-open Inventor I have to add them all over again.
View 1 Replies
View Related
Oct 3, 2013
In illustrator I like my row size to be at 50px in size. Every time I close down AI and reopen it later it seems that the layers have reverted back to their default sizes (I think its like normal or somthing cartoonishly small)
To get to the option panel I'm talking about, bring up your layers in AI then in the top right drop down menu select Panel Options at the very bottom of the contextule menu, and in that window the top options are "Row Size".This is where I pick "Other" and then set it to 50px (every time).
View 1 Replies
View Related
Feb 21, 2013
I'm having troubles with the inventor 2013 shortcuts.
Actually, i have to confirm my selection when i have 2 aliases starting with the same key (for example : D for dimension, and DF for discussion forums).
The fact is i never use the DF shortcut, and want to clean it up, or at least change it. When i do, it works well, until i restart inventor.
When i restart Inventor, shortcuts configuration resets and i have to do the change again.
I found a way to not spend that much time on changing them, with exporting/importing settings, but it's still annoying to import every time i start Inventor.
Dell precision M6600
Quadro 3000M
Windows 7 64 bits
French version of Inventor
intel i7
View 4 Replies
View Related
May 16, 2013
We have the following problem (on AIS2010): we often recycle existing designs with small changes/adapting, means: the (sub)assembly is saved with a new name and part number, and the subcomponents that need to be changed, get a new part number and file name too. So we save a copy, save the parts need changes and then replace the "old" parts in the new assy.
Doing so unfortunately retains the "name" of the component in the model browser tree. Why is that in the first place.
But I'm trying to write a macro that resets the dspalyed names in the browser.
What I found so far, is that under BrowserNodeDefinition, there's a Label property which contains the displayed name, and this does not get changed when the part is replaced. So I thought, I can just compare these BrowserNodeDefinition.Labels with the actual file names and forge a new Label from the new name and the sequence number, however, the BrowserNodeDefinition object is read only, can't be changed.
I haven't found anything else that would contain this name that is displayed in the browser.
View 8 Replies
View Related
Mar 6, 2013
The model space orientation is different than the paper space orientation (I have my viewport rotated) but whenever I am working in paper space and double-click inside model space to activate the viewport, it resets/reorients the view to match the orientation in model space. It also changes the scale. If I lock the viewport and then double-click inside to activate model space it does not change.
I don't want to always have my viewports locked to work on them in paper space.
View 4 Replies
View Related
Sep 4, 2012
We use a number of blocks with block tables for data extraction here, and whenever one of the blocks is modified and updated, all of the block tables reset to the default value. This happens for any block reference change, not just changes to the block table (which makes sense that it would reset).
How can we update these blocks without having to manually change all of the block tables afterwards?
View 2 Replies
View Related
Jan 13, 2014
To summarize: It seems that compounding a path resets the rotation of the gradient to it's original degree of rotation.
Detailed version:
1. Create a shape.
2. Add a gradient fill. Note it's degree of rotation. Let's say it's set at 10°.
3. Now rotate the shape by any means (transform or rotate tool). Note the gradient degree of rotation has shifted the same amount as the shape was rotated (if it was rotated 50°, the gradient will show at 60°).
4. Make it a compound path.
5. Instantly the gradient shifts back to it's original degree of rotation of 10°.
It appears that when rotating a shape with a gradient, the rotation of the gradient is locked to the rotation of the shape. But when making it a compound shape it releases that lock and "remembers" it's original state. But that is only true as soon as you make it a compound path, but if you no go ahead and rotate it just a bit using the cursor (as opposed to selecting transform > rotate), the gradient will switch back to how you would expect it to rotate in the first place...
Workaround would be to make it a compound path before rotating the shape at all.
View 1 Replies
View Related
Sep 2, 2013
I'm having a major issue here, I use custom colors (created in my custom palette), X^ used to hold it very nicely, even in PDF exports etc.
Now - with the latest update, X6 "forgets" the custom colors, it resets it to default color, I have to manually set every object to the custom color all over again.
View 14 Replies
View Related
Nov 2, 2008
Version: Photoshop CS (1)
Computer: Pentium 2.4 gHz dual core
4 Gigs Ram
Nvidia 7950 video card Win XP Home
I started to get this strange error with my Photoshop when making a new document in Photoshop and got the following error: "cannot initiate Photoshop because Photoshop cannot create any more windows".
I thought the easiest thing to do would be to reinstall (Photoshop needs reinstalling extremely often unfortunately), but now when I try and open the program it just give an alert beep and closes back up. Even though I rarely use ImageReady, I opened that up to check and it does the same behavior.
View 3 Replies
View Related
May 28, 2004
Can anyone tell me what color settings I need to set in photoshop in order to avoid this from happening? It only happens once in a while and I don't know what I've done to fix it or screw it up. What happens is that when I'm in photoshop and I do a "save for web" my document jumps to image ready and when viewing '2 up' for optimization purposes and comparison, I realize that the original view is actually duller in color and does not look like the original in photoshop. The blacks are definitely not as black.
View 1 Replies
View Related
Jun 7, 2004
when I got my first Macintosh IICX and all of my MacPaint clip art. I don't want to get rid of the clip art because since I'm still using a black ink printer and not upgrading to a color one, the clip art looks nice in newsletters and the like.
Up until this time I had been using SuperPaint which had the New Superbits editing plug-in to refine the pictures so they had the smoother and cleaner lines instead of looking jagged. With my new computer and printer, I'm also getting Photoshop CS packaged with Adobe Creative Suite Premium, which I have never used before. Since I have not received my order yet, I was wondering if anyone could tell me whether Photoshop has the capability of improving the older MacPaint clip art like SuperPaint did with the New SuperBits editing plug-in. Over the past two days, I have been trying like crazy to back-up my pictures with SuperPaint and then re-saving them with Graphic Converter. It's been so incredibly slow that I thought I would go ahead and ask you, the experts, if Photoshop can also improve the quality of my older MacPaint clip art or if I should continue to back-up my clip art like I have been doing.
View 2 Replies
View Related
Jun 17, 2008
I have just got back from the Elbow gig and pulled the images off the card. They load up in Bridge but don't have actual picture thumbnails. They are named correctly, ie: IMG_3483.CR2 but they won't open!? Error message says 'Could not complete your request because Photoshop does not recognise this type of file'
I could see them on the back of the camera.
mac users... i did a software update the other day and I noticed that there was an update for ACR. Could it have been something to do with that? And why can't I find ACR in my Applications?
View 3 Replies
View Related
Apr 29, 2013
I use Photoshop Elements 11. I am trying to upload photos to a website and the browse only goes to Windows/Pictures. How do I navigate to photoshop to upload pictures there?
View 3 Replies
View Related
Oct 30, 2012
of Adobe Photoshop v6.0.1 (quite old, I know, but it do all I want and on my old HW I did not plan/want to use any more recent version, because they are HUGE and with just a little preferences trick, I did not need to reinstall my PS - ever ), yet as Czech user, I need my software to type some special characters as well. These are looking like this:
[URL]...
Now the only problem is, that some of them PS just refuse to type. Seven small and seven caps are just wrong. See the line "for PS:"...
I battled the problem even by editing the fonts itsels, because that seems to work with Adobe Illustrator, yet this also cause the edited fonts to be useless in another programs. So I looked deeply and in the Adobe settings in directory Fonts / Reqrd are directory CMaps and perhaps editing the character map used will be better and usable solution? how to do it or even determine with file from the 96 files in the CMaps directory are right now used by Adobe Photoshop?
View 3 Replies
View Related
