Photo Deluxe Home Edition 4.0 - This program will no longer boot up on my computer. Worked fine until I connected my PC to the internet. Occasionally I get a message about launching 16 bit plugins.
View 6 RepliesMy question is, whether Photo Deluxe can be run only with admin privileges or as standard user, too.
A customer of ours uses this program and cannot start it without admin privileges. If logged in as standard user the pd4.exe just doesn't react in any way. No failure, nothing. Executing right is set, so it should work.
This happens repeatedly as I open the program and attempt to open a file. The "open file" dialog box flashes for a split second then disappears and the Photoshop program freezes up.
View 3 Replies View RelatedIs my software out of date/no use/rubbish? I can open 4.2 and that was the disc I installed but subsequent versions 4.3 and now 4.4 won't open and a box comes up saying error and some digits.
View 22 Replies View RelatedWhen trying to open Adobe PhotoDeluxe 4.0 Friday, a window opened saying there was not enough RAM memory. Earlier in the week I had upgraded to 1,5 gigs of RAM.
I am 71 and have used Adobe PhotoDeluxe for a dozen plus years. Never any problems when I was using Windows 95, 98, or XP with far less RAM.
I've been told by a computer service tech that the installation of Windows XP Service Pack 3 caused this to occur. I've downloaded the Adobe update 4.0.1 for this program.
I cannot register Photoshop Album Starter Edition 3.2 ! The programm worked for years without asking me to register.Now I have no access to te program anymore.
View 2 Replies View RelatedMy daughter is studying for her GCSE's and one element is Design Technology where she has photographic assignments.
anyone know if a letter of confirmation from her school confirming that she is a pupil there and is studying for GCSEs would be sufficient for Adobe's needs?
"You may purchase only one license of any Adobe Student Edition product. This license may be used only on your privately owned computer. Student Edition products may not be resold by the end user." Are the exact words on the Student version page.I was told that this means it can only be installed once.
How true is that?What if I get a new computer?My specific dilemma is that I am on an older computer right now but do not have the money to get a much needed new one till the end of the year.Class has started and I need to use PS cs4.Am I off my rocker?
I'm trying to play a video that I created from my Panasonic LUMIX DMC-TZ5 digital camera. When I try to play this file, it only operates in fast forward.
This file that I am playing was copied from a CD. (I made the video with my camera, copied it onto my computer, then burned this video onto a CD.) So it seems like I lost some information by copying from my camera onto my computer. Is there something I can do to fix this so I can play at a normal speed?
Where/how do I find this in PS6 extended full edition.
View 3 Replies View RelatedHaving problem with performance using PS CS 6 Extended. The wheel is spinning for almost every action in PS on my Mac book Pro.
Using: 15-Inch MacBook Pro Retina2,7 GHz Quadro Intel Core i716 GB 1600 MHz DDR3L SDRAM768 GB SSDMac OS X 10.8.3Before I joined the Creative Cloud I used the standard PSCS 6. No problem at all.
Â
When I installed the Extended version, everything slows down. This is only a problem with PS. Can I start PS as standard edition?
I now need to register the photo shop album starter 3.2 that's on my computer?
View 3 Replies View RelatedHow can I recover photos in Photoshop Starter Edition?
View 1 Replies View RelatedI bought the PS CS3 Extended Student Edition and I have registered on the Adobe website to get my serial number which all went fine, but when I put the Disc in the drive, it does not appear on My Computer,Desk Top for me to open and upload photoshop to my computer! I have put the disc into another hard drive and attached it to my monitor but still nothing comes up! I have tried it on a completely different computer and it appears then, just not on mine! My computer seems to be working fine as I am able to upload other discs to it!
View 7 Replies View RelatedI tried to install the trial version of cs3 from the adobe website, but after I installed the setup part and started downloading the actual program, it said it downloaded 1 shared component but it couldn't download the actual CS3 program.
My computer says I'm using:
Quote:
Microsoft Windows XP
Media Center Edition
Version 2002
Service Pack 2
I'm not sure what the download problem was, I checked Adobe's troubleshooting page
P.S. - If CS3 isn't compatible with Windows XP Media Center Edition, is Photoshop CS2? I had CS2 on my old computer, which was one of the Windows XP (can't remember which one, but it had service pack 2) but I would like to download CS2 or preferrably CS3 on my new computer.
When I try to use the guided edition start to load but neves finish.
View 3 Replies View RelatedSpecifically, how can I import photos from Photoshop Starter Edition 3.0 to Photoshop Lightroom?
View 1 Replies View RelatedHow do you retrieve photos from Adobe Photoshop Album Starter Edithion 3.2 when you are unable to get an unlock code, i have many wedding pictures of my daughters that i wish to be able to print.
View 1 Replies View RelatedI have cs5 extended student and teacher edition - Windows - there is a top level 3D menu available to me. But when I follow instructions to create 3D text, the 3D options are unavailable to me.
View 5 Replies View Relatedyou holding all my photos hostage. How do I unlock Adobe Photoshop Album Starter Edition 3.2? How do I get around the registration page that pops up when I go to the Photoshop. The page will not let me by to try any thing.
View 1 Replies View RelatedI'm aware that Adobe Photoshop Album Starter Edition 3.0 is not supported by Adobe anymore. I have thousands of photos organized on it using its "Category" function. Does Photoshop Elements 11 have a similar function? (I'm in the midst of also switching to a new computer and my old one can't load the info on the PS 11 program available on this site.) I'm extremely concerned I not lose the ability to retrieve my pix by the categories I've already assigned them, when I switch to PS 11 on my new computer.Â
View 1 Replies View RelatedMy home computer hard drive crashed, so I can't deactivate the copy of CS2 that was installed on it. Since I still need the original CS2 on my work computer, how can I reactivate the copy of CS2 on my home computer?
View 2 Replies View RelatedOur home network is a Vista PC with an Epson 2880 printer attached to the Vista PC. My wife's XP PC connects through our simple network and prints on the Epson printed by going through my computer. Simple set up, no problems. We both use CS4, set so CS4 manages color, correct Epson paper profile, printer color management off, all the correct settings. Both our monitors are color corrected with Spyder3. When she prints from her computer every picture has a magenta cast. Even more strange is when I copy the same picture onto my PC and open it in my copy of CS4 the picture looks normal but CS4 will not print it. CS4 says I do not have a printer attached. I can open any other picture in the same CS4 session and print with no problems. Every time I try to print a picture that she printed CS4 says there is no printer. This occurs even when I have copied the picture onto my computer and opened it on my computer. I have tried renaming the picture and even changing the format to TIFF or JPEG but CS4 still refuses to print it. I can open a new blank document and use the move tool to move the picture onto the blank document, At this point I can print from CS4 normally AND the picture will not have any color cast?
View 1 Replies View RelatedI would like to set up an inexpensive Color Management workflow for my home.
My scanner is Microtek 4800.
Monitor is a Dell M992 hooked up to a Dell XPS w/ Windows XP Pro.
The printer is an Epson Stylus PHOTO 925.
My main goal is to refurbish/repair damaged photos/images.
For example, I would like to take an old picture, scan it, retouch and repair it using Photoshop CS, then print it to Photo-quality paper on my Epson.
It seems most calibration tools are expensive.
using Adobe Gamma to calibrate my Monitor. Do I really need to calibrate or profile my scanner and printer? Or can I merely use my scanner w/ no presets, adjust the image in PS, then set my printer driver to "do not color manage"?
is there a way to calibrate/profile my system that is not too expensive?
I sell limited edition prints of a run of between 350 and 500.
I am trying to get it set up so that my signature and the print number is included as part of the print. Here is an example:
Â
You'll see at bottom left there is my signature and underneath is is the print number e.g. 110/350 (this is legible when printed at 18x12" size).
Inserting the signature and the "/350" is easy since it only needs to be done once per image.
The difficulty comes with inserting the actual print number e.g. "110"
Â
At the moment I have 0 to 9 written out and scanned in as separate numbers. So to make "110" I use the "1" digit twice, plus the "0" digit. I.e. I haven't written out 1 to 500 and scanned them in all as separate numbers, I've just done the 10 digits and use those 10 digits to make all the different numbers I need.
Â
Is there a way to create an action that will create say 350 JPEG copies of the original file, each one with its own unique print number inserted? (And ideally automatically saved with the print number as its file name!)
For some reason when I open the application the main screen appears inverted with the workspace as gray instead of white and the toolbar inverted from white icons on black background to white icons on black background.Â
Can't find what I did to create the change. How do I restore the default?
How can i change country?
View 1 Replies View RelatedI am trying to install an old Photoshop CS Ver.8 on my new Windows 7 Home Premium OS but it tells me it's a trial Version?? It installs perfectly and works fine but informs me it is good for only 29 more days?? I bought this program new years ago. I have installed earlier versions in case it needs previous DLL's but that didn't work.Â
View 6 Replies View RelatedLong time PS user with no real problems until now. CS2 works for a while but then suddenly my drop down menus (file, edit, image etc) will not drop down.
I can still edit the images I'm working on with the tools palette but can't save my work, nor can I use any drop down menus (even help, window and view). If I then try to close PS it sits there and essencially crashes and I have to close it via task manager.
I'm looking to purchase a new PC that runs the 64-bit Windows Vista Home Premium. I'm wondering if my older programs, Premiere Pro 1.5, Photoshop 7, and Dreamweaver MX 2004 will run in the new system.
View 39 Replies View RelatedHow do I add a border around the entire home page,
This CSS style sheet is part of the original 5-page site template. I am actually using only the first page of this template (with various sections from the other pages incorporated into this home page). Does the CSS style sheet actually apply also to this 1-page modified template?