For some reason when I open the application the main screen appears inverted with the workspace as gray instead of white and the toolbar inverted from white icons on black background to white icons on black background.
Can't find what I did to create the change. How do I restore the default?
I'm trying to use Illustrator CS5 (as well as Photoshop CS5) on my Lenovo X61 Tablet (running Windows 7 32 bit) in 270° screen rotation (I think this is called secondary portrait mode in windows?), but my X and Y cursor positions are inverted. This means if my stylus is on the left half of the screen, my cursor will be on the right side, the same distance away from the right border as my stylus is from the left. Likewise if my stylus is somewhere in the top half of the screen, the cursor will be somewhere in the bottom half of the screen, the same distance from the bottom border as the stylus is from the top. The only time the cursor and stylus positions match is in the dead center of the screen.
The stylus is working properly in other applications in this screen rotation, including InDesign CS5 (the only other Adobe product I've tried with this), just not in Illustrator or Photoshop.
I managed to move the home screen on my Mac to the left but now it will not return to centre, so that I can access the controls. A two fingered drag does not seem to work.
View 2 Replies View RelatedI would like to set up an inexpensive Color Management workflow for my home.
My scanner is Microtek 4800.
Monitor is a Dell M992 hooked up to a Dell XPS w/ Windows XP Pro.
The printer is an Epson Stylus PHOTO 925.
My main goal is to refurbish/repair damaged photos/images.
For example, I would like to take an old picture, scan it, retouch and repair it using Photoshop CS, then print it to Photo-quality paper on my Epson.
It seems most calibration tools are expensive.
using Adobe Gamma to calibrate my Monitor. Do I really need to calibrate or profile my scanner and printer? Or can I merely use my scanner w/ no presets, adjust the image in PS, then set my printer driver to "do not color manage"?
is there a way to calibrate/profile my system that is not too expensive?
I am designing a Flyer, (PDF) in Photoshop and that will not be going for printing company but printed in a University in UK. What DPI / PPI? Normally for web i use 72 and for Printing company i use 300. But for home printing, i don't know.
Secondly, what about color. Will CMYK be good for home printing. I don't know exactly what printer it is going to be.
How could I , for example, make anything blue transparent, and anything partially blue - partially transparent, and anything not blue - not transparent? (without resorting to the wand tool)
So basically, if you imagine a selection in black and white, where white is the selection, and black is not, how can I do something similar so blue is treated as the selection (depending on how 'blue' it is).
I mean by color screen (since I can't remember the correct term),
I think I might have accidentally used a wrong key command but as I was working on my digital art peice; the yellow from the layer I was working on turned green. So I thought to myself I must have accidentally pressed the key command for inverting the colors on the layer. But when I tried to invert it again, hoping it would turn to yellow again, it actually turned purple. So I zoomed in but then all of the other layers changed colors too. Some of the layers retained their original color but are still distorted and inverted.
I tried closing photoshop and reopening the document but to no avail. I also tried resetting all of the settings but that didn't do anything either. I think I'm going to have a heart attack if I can't fix this problem; I spent months on this and I have about a thousand layers ...
Every time I open a photo in PSD CC, It opens pixelated and inverted.
View 1 Replies View RelatedWhen I open the Diffuse Glow filter, it appears as if inverted, or negative. What I expect to be a light halo effect shows up as a dark glow. How can I reset this filter to show the normal 'light' halo effect?
View 4 Replies View RelatedYes (Command I) is a quick fix to this issue but wondering why the default is set as invert?
View 10 Replies View RelatedI'm new to using 3DS Max, and my SpacePilot moves around inverted when compared to Inventor, Mudbox, or any other 3D software. Is there a way I can change this? Why would 3DS Max make it so difficult to move around?
View 9 Replies View Relatedwhen i select a text message an invert it, the whole picture gets inverted - waht am I doing wrong?
View 2 Replies View RelatedFor no apparent reason, some of the images on my computer screen are coming up in odd, bright colors similar to a negative, but not complete. It happens to images I open on independent web sites and images stored on my computer.
When I open some images in Photoshop5, it asks if I want to discard the embedded profile. If I answer yes, the image displays fine. If I answer No, the image colors are distorted. This problem persists on my laptop screen and on the monitor attached to laptop.
Can any one give me a way that i can print a picture from photoshop and give me the same color of the output page.
View 3 Replies View RelatedWhen I view them with ACDsee viewer or Canon software they both look the same. But when I use photoshop the images look too saturated. It's not easy to edit my photos, as the out put does not look the same as when I am editing.
View 3 Replies View RelatedI have been working on a few projects where the site plans are done by the Engineer in AutoCAD. They are campus-sized site plans so to re-create them in Revit would be too time consuming. So, I am linking them into my model.
So, what I have been doing is creating several masking regions around the perimeter of the site plan in Revit in order to 'crop' the sites as necessary - I do not want to create several different site plans in CAD and bring them in separately as to avoid multiple updating when the site changes).
Is there an 'inverse' masking region where the outside of the masking region is what masks instead of the inside of the enclosed masking perimeter?
When I want to move an object up I have to put in a negative number? Is this a preference I am overlooking?
View 20 Replies View RelatedGot specs for converting a print ad to jpg for ATM: 800wx600h; 72dpi; 256 colors. As far as I know, the only way to get 256 colors is to convert to index. When I do, the halftones get slightly grainy.
Also, I can only save the file as .psd, not .jpg as required. How to convert my file to 72 dpi jpg with 256 colors.
I photograph a bright red car in raw mode on a digital slr (Canon 20D) set to Adobe rgb 1998 and view it in Breeze Browser and it looks just as I remember it. I open it into Pshop CS5 extended (which is set to Adobe rgb1998, Europe ISO Coated Fogra27, (as I am UK and this is what a calibration company set our works proofer to) gray gamma 2.2 dot gain 20% and its become a little desaturated.
Sampling it and comparing screens and colours with Breeze Browser its definitely less red, a bit more orange red instead. I need to up saturation to return the red, both in RAW converter and also after image opened if not done so beforehand in RAW converter. Colors just look muted.
What tests can I carry out to find out what is going on ?
Perhaps create a rgb 255 0 0 image in a way not influenced by photoshop and photo the monitor, then open this in photoshop and sample it. However that would be influenced by the exposure of the camera. Maybe I need to create a Kodak grey card type image and establish correct exposure for the monitor brightness first. so what would that be as rgb ?
I know though that Pshop is displaying duller. Once upon a time we had Adobe gamma and one would go through the calibration wizard to set up Photoshop having already set up the monitor.
What do we have to do after installing CS5 extended or CS4 to ensure Pshops display is correct ?
I have Adobe gamma in the control panel, Is this something we still have to do in CS5, I wonder if its there because I still have Pshop 7 installed which used that wizard.
XP pro is my OS.
I'm using a hueyPro to calibrate my monitor.
when I use the "Print Screen" button on my keyboard and paste into Photoshop there is a color shift.
I am recoloring a paintball gun from blue to green. There are some parts with screws in the middle, is there a way I can select one area, and have another inverted?
[URL].......
This is what I have so far. You see that rectangle with the screw in the middle? There's my issue. I need to colorize the blue, but not the screw.
I know there is a tool where it everything is masked in red and it selects what isn't red, but that is too hard to use. I want to use the lasso tool.
We use Excel quite often in Civil 3d. Every now and then a system or drawing will randomly begin printing the OLE with inverted colors. ie black box with white text. Restarting sometimes works.. Sometimes not. is there a variable for it?
View 1 Replies View RelatedHow can I Create inverted fillet drawing describes the required
fillet.jpg
I find that when i am working on a file and try to save as web, the colour on my screen is lighter than the colour that the image has when i am on the saving as web window. How do i get to have a consistent color in both my on screen image and the one i am saving?
This is specially true for photos, they look pale and skin tones are dull. I want images to have the windows RGB profile even when i am saving them as web images.
While using Photoshop CS4 Extended version 11.0.1, whenever I change Screen Modes, it causes the color of all photos to display improperly. The pictures become very dull and gray. Even the whitest whites (255/255/255) appear to be a dull gray, as if a black layer set to 30% opacity is placed in front of the picture. The color still displays properly in the thumbnails of the Layers Panel.
Every picture I have open is affected in this way. Closing the pictures and reopening them does not help. Any new pictures I open are also affected. Changing back to the original screen mode does not fix the problem. The only thing that fixes the problem is closing Photoshop altogether, and then restarting it.
It doesnt matter how I change Screen Modes, whether I change it from the Screen Menu, the Applications Bar, or cycle through the modes using the F key. Even hitting the Tab key to hide the panels causes this to happen. Being a long-time Photoshop user, I have long been in the habit of cycling through screen modes frequently, so suggesting I not cycle through Screen Modes isnt an option because itll take months to break me of the habit.
Is there a way to force CQL to process a ' " ' as an useable character ?I am trying to do a CQL search for text with that the double quote in it.
View 13 Replies View RelatedMEP 2013
I have a three point arc, and the custom line type has text that is not only inverted, its backwards.
I've had gimp for quite awhile now and ive never come across this problem before. im trying to use the layer mask with greyscale and inverted image just as i always have. but when i go to edit my color i get grey! ive always been able to change colors this way! i know that the mode is set to rgb. im on the correct layer. ive closed it. ive restarted my laptop.
If i click on the transparency part i get a big blob of color as i should. but on the mask it does what its supposed to but in shades of grey. i dont understand whats wrong! it always worked perfectly. . .
newest Gimp
windows 7
Only thing that i have changed is i have a new tablet but i still have the problem without the tablet
I know to get the spacial filter on an xref to get the clip verticies, but not how to tell if its an invert xclip.
Even the arx guys seem to have difficulty with this. How to do it with lisp, com, or arx code?
[URL] ......
Is it possible to model a surface in Civil 3D with an inverted rock face as in the cross section below? We will be scanning a large hill for quantitiy before and after they blast so will be using point clouds.
View 4 Replies View RelatedMy home computer hard drive crashed, so I can't deactivate the copy of CS2 that was installed on it. Since I still need the original CS2 on my work computer, how can I reactivate the copy of CS2 on my home computer?
View 2 Replies View Related