Photoshop :: How To Find PS6 Extended Full Edition
May 12, 2012Where/how do I find this in PS6 extended full edition.
View 3 RepliesWhere/how do I find this in PS6 extended full edition.
View 3 RepliesHaving problem with performance using PS CS 6 Extended. The wheel is spinning for almost every action in PS on my Mac book Pro.
Using: 15-Inch MacBook Pro Retina2,7 GHz Quadro Intel Core i716 GB 1600 MHz DDR3L SDRAM768 GB SSDMac OS X 10.8.3Before I joined the Creative Cloud I used the standard PSCS 6. No problem at all.
When I installed the Extended version, everything slows down. This is only a problem with PS. Can I start PS as standard edition?
I bought the PS CS3 Extended Student Edition and I have registered on the Adobe website to get my serial number which all went fine, but when I put the Disc in the drive, it does not appear on My Computer,Desk Top for me to open and upload photoshop to my computer! I have put the disc into another hard drive and attached it to my monitor but still nothing comes up! I have tried it on a completely different computer and it appears then, just not on mine! My computer seems to be working fine as I am able to upload other discs to it!
View 7 Replies View RelatedI have cs5 extended student and teacher edition - Windows - there is a top level 3D menu available to me. But when I follow instructions to create 3D text, the 3D options are unavailable to me.
View 5 Replies View RelatedI just recently (yesterday) became a member of the creative cloud. Now I am aware that my subscription (full individual subscription) allows me to use Photoshop CS6 Extended.
I previously had Photoshop CS6 Standard installed (my suspicion why it's not working properly) removed it and downloaded Photoshop via Application Manager, but it's still not the Extended version.
Also is there a way to keep the downloads because I'm constantly using photoshop at work (one of my main tools) and having to uninstalling and re downloading (which seems to take forever) is not the best solution.
OS: Windows 7 Home Premium 64bit
where can i find it?
View 2 Replies View RelatedI have a copy of CS4 Extended MAC with a valid serial number. I don't seem to be able to find a download for this version. I see the update but I am installing it on my new computer and don't have my disc. Where can I download it?
View 1 Replies View RelatedI did download the Adobe Photoshop CS6 trial, via the website I did go to the Download Manager. Now I have it installed, but i'm not sure if I have the extended or normal version. How can I check that?
And, if I don't have it.. The download manager does nothing say about the Extended version (trial of it), and at the Adobe website I can't find a way to download it.
I can't figure out how to adjust the size of the program screen when in Full Edit Mode. I can see portions of the Quick Fix menu and none of the Guided Fix menu. There seems to be no way to resize the window.
View 5 Replies View RelatedCurrently I am running PhotoShop extended CS5, 64bit. in which i have my fovorite plugins (Topaz, Nik and OneOne) running perfectly.
I have upgraded to Adobe Creative Cloud and installed PhotoShop extended CS6 using Adobe Application Manager as recommended. It didn't ask me if I wanted to upgrade or do a new install for PhotoShop. So now I CS6 running with no Plug-ins. I need my plugins! LOL.
I tried pointing to additional plugins in the CS6 preference to the CS5 plugin folder. Upon Launch it gave me a whole slew of error messages saying something cant load or launch C+ runtime error or what not. It does open up, but it only gives access to Nik and Topaz. OnOne doesn't show up under filters or extensions.
So, what are my options?
Just copy the plugins from CS5 to CS6?
I dont't want to reinstall all the plugins to CS6 if I don't have to as I've auto updated them over time to current versions online, so only have installation files for my original purchases.
I cannot register Photoshop Album Starter Edition 3.2 ! The programm worked for years without asking me to register.Now I have no access to te program anymore.
View 2 Replies View RelatedPhoto Deluxe Home Edition 4.0 - This program will no longer boot up on my computer. Worked fine until I connected my PC to the internet. Occasionally I get a message about launching 16 bit plugins.
View 6 Replies View RelatedMy daughter is studying for her GCSE's and one element is Design Technology where she has photographic assignments.
anyone know if a letter of confirmation from her school confirming that she is a pupil there and is studying for GCSEs would be sufficient for Adobe's needs?
"You may purchase only one license of any Adobe Student Edition product. This license may be used only on your privately owned computer. Student Edition products may not be resold by the end user." Are the exact words on the Student version page.I was told that this means it can only be installed once.
How true is that?What if I get a new computer?My specific dilemma is that I am on an older computer right now but do not have the money to get a much needed new one till the end of the year.Class has started and I need to use PS cs4.Am I off my rocker?
I'm trying to play a video that I created from my Panasonic LUMIX DMC-TZ5 digital camera. When I try to play this file, it only operates in fast forward.
This file that I am playing was copied from a CD. (I made the video with my camera, copied it onto my computer, then burned this video onto a CD.) So it seems like I lost some information by copying from my camera onto my computer. Is there something I can do to fix this so I can play at a normal speed?
I now need to register the photo shop album starter 3.2 that's on my computer?
View 3 Replies View RelatedHow can I recover photos in Photoshop Starter Edition?
View 1 Replies View RelatedI tried to install the trial version of cs3 from the adobe website, but after I installed the setup part and started downloading the actual program, it said it downloaded 1 shared component but it couldn't download the actual CS3 program.
My computer says I'm using:
Quote:
Microsoft Windows XP
Media Center Edition
Version 2002
Service Pack 2
I'm not sure what the download problem was, I checked Adobe's troubleshooting page
P.S. - If CS3 isn't compatible with Windows XP Media Center Edition, is Photoshop CS2? I had CS2 on my old computer, which was one of the Windows XP (can't remember which one, but it had service pack 2) but I would like to download CS2 or preferrably CS3 on my new computer.
My question is, whether Photo Deluxe can be run only with admin privileges or as standard user, too.
A customer of ours uses this program and cannot start it without admin privileges. If logged in as standard user the pd4.exe just doesn't react in any way. No failure, nothing. Executing right is set, so it should work.
When I try to use the guided edition start to load but neves finish.
View 3 Replies View RelatedSpecifically, how can I import photos from Photoshop Starter Edition 3.0 to Photoshop Lightroom?
View 1 Replies View RelatedThis happens repeatedly as I open the program and attempt to open a file. The "open file" dialog box flashes for a split second then disappears and the Photoshop program freezes up.
View 3 Replies View RelatedHow do you retrieve photos from Adobe Photoshop Album Starter Edithion 3.2 when you are unable to get an unlock code, i have many wedding pictures of my daughters that i wish to be able to print.
View 1 Replies View Relatedyou holding all my photos hostage. How do I unlock Adobe Photoshop Album Starter Edition 3.2? How do I get around the registration page that pops up when I go to the Photoshop. The page will not let me by to try any thing.
View 1 Replies View RelatedI'm aware that Adobe Photoshop Album Starter Edition 3.0 is not supported by Adobe anymore. I have thousands of photos organized on it using its "Category" function. Does Photoshop Elements 11 have a similar function? (I'm in the midst of also switching to a new computer and my old one can't load the info on the PS 11 program available on this site.) I'm extremely concerned I not lose the ability to retrieve my pix by the categories I've already assigned them, when I switch to PS 11 on my new computer.
View 1 Replies View RelatedI sell limited edition prints of a run of between 350 and 500.
I am trying to get it set up so that my signature and the print number is included as part of the print. Here is an example:
You'll see at bottom left there is my signature and underneath is is the print number e.g. 110/350 (this is legible when printed at 18x12" size).
Inserting the signature and the "/350" is easy since it only needs to be done once per image.
The difficulty comes with inserting the actual print number e.g. "110"
At the moment I have 0 to 9 written out and scanned in as separate numbers. So to make "110" I use the "1" digit twice, plus the "0" digit. I.e. I haven't written out 1 to 500 and scanned them in all as separate numbers, I've just done the 10 digits and use those 10 digits to make all the different numbers I need.
Is there a way to create an action that will create say 350 JPEG copies of the original file, each one with its own unique print number inserted? (And ideally automatically saved with the print number as its file name!)
I'm happy with the NX version, but if I want to upgrade to XT, how do I do it? I looked on the upgrade options for XT and upgrading from NX, is not there.
View 8 Replies View RelatedI need some 3D prototype, but there should not be nothing more. I mean any Autodesk logos like in drawings. How to print something from Inventor Student edition?
View 3 Replies View RelatedI'm currently working on a design in 3ds Max 2013 Student Edition. When I first found out about 3d modelling, the creativity peaked my interest greatly and since Mesh became available in Second Life and Inworldz, I have since been self teaching myself from Max tutorials.
2 years ago approximately, I downloaded the 3ds Max 2013 from the Autodesk site and upon installing it, the program crashed at 96% faithfully everytime. When I asked how to resolve this, I was told to download the trial version and put the code to authenticate the software, it then went from 30 day trial to student edition.
I have since been using 3ds Max 2013 updating the FBX converter to work with Second Life and Inworldz making low poly designs.
Now my current design has 3587 polys and 6,239 vertices, when I move close to my design and select edge, then insert vertex, 3ds Max says it encountered an error and gives me the option to save my scene or cancel to close Max. 100% of the time, if I say save scene, my scene is automatically corrupt and I have to go to a previous save.
No I am not entitled to install the PU's (Patch Updates) since its a student edition and I don't have the money to purchase 3ds Max 2013.
I have tried to convert some drawings from 2013 student edition to 2011 edition but the DWG TrueView will not allow me to convert student editions. How to use drawings from 2013 edition on 2011.
View 1 Replies View RelatedIs my software out of date/no use/rubbish? I can open 4.2 and that was the disc I installed but subsequent versions 4.3 and now 4.4 won't open and a box comes up saying error and some digits.
View 22 Replies View Related