I am trying to turn up one corner so that I can put a logo (or other small image) on the page that the upturned corner reveals.
In other words, one page is on top of another. I want to turn up (or curl back) a corner of the top page to reveal the exposed area on the 2nd page.
I'm using photo shop 6 on a PC.
I would like to create the look of a corner of page turning using Photoshop CS3.
View 4 Replies View RelatedPlease take a look at the attached dynamic block.
I have two flips in there, one verticle, one horizontal. For some reason, whenever I tell it to flip, and then select everything in the block, it doesn't flip the other flip's arrow.
Then, when I created the second arrow, and went back to include the first flip in the second flip's Action Selection Set, it doesn't pick it up. Doesn't matter if I do "modify selection set" or "new selection set"... doesn't matter if I select everything within (blue box) or everything that touches (green box).
Yet, when I highlight the icon box, it shows everything is selected.
Can flips not flip other flips?
Additionally, I want the rotation parameter to flip on the horizontal flip (so it stays outside the block), but I can't get that into the selection either.
What am I missing with these selection parameters?
I have a banner heading that is more or less outlined text. I want to give all the corners a rounded corner and at the moment would just do it all by hand, one at a time. So I want to go from a to b:
But I would like to find an easy way to make all corners the same diameter regardless of the angle too.
I draw square. The 1st point and last points are left-top and finally set 5 points.The direction is clock-wise and made closed path.To get smooth-curved polygon shape, I used API 'PointsToCurves'.But, the first and last points are connected by cornered (not smooth) point. Here's result.
Maybe, I must set that square is closed path, to API, but it seems to be no parameter to set.So, I want to know how to get smooth corner shape every corner.I use SDK CS5.
I have found loads of tutorials showing how to do this with a normal single tone page but I am having trouble getting the curl to work well on the bottom right hand corner with the texture and also the torn edge. I have tried distorting it but it just goes all blurred.
View 3 Replies View RelatedI am using Photoshop Elements. I have an image with text. When I flip it horizontally (to make a mirror image) the text changes as if now I am looking at it's back side. It looks very strange.
View 2 Replies View RelatedI've got an animated gif that I want to flip so one faces left and one right, can I do this in PS and retain animation.
View 9 Replies View RelatedI was workin on my new Avatar, and was on a layer in which I wanted to rotate the image by 180 degrees. For the life of me I searched through PS:CS's menu and couldn't find a rotate command!
There was ROTATE CANVAS, but that rotated the entire image. I had to end up increasing the window of the document and pressing CTRL + T for a free transform. Is there a:
Flip Image Vertically
Flip Image Horizontally
command?
I've selected the right strip/portion of the running pants.
I now want to select the adjacent strip on the left.
I want to keep the left part of the selection, which would be the right edge of the strip on the left. I have no idea how to just save the left part of a selection --
I have an image of a man with his arms out, facing the left. I want to duplicate this image and "flip" it over, so that I have two images of the same gentleman facing eachother. My question really is how to invert or flip the image over so that his arms are facing the right? Any help or advice would be greatly appreciated, as I'm sure this is relatively basic [though still beyond my abilities.]
View 3 Replies View RelatedHow to flip the text in my circle using Photo Shop CS6 (cloud version).
Â
I made McDermott as one layer, then photography as another layer. I want Photography to be right side up within the circle, it's upside down as it is now.Â
Â
Here is a logo I am trying to create for my photography. Once I get the Photography font turned right side up, I will insert a large M in the circle - but 1st things 1st.
With my top Layer selected; In the Edit menu, I hit Transpform > Flip Horizontal... but nothing happens! What could this be?
Â
(Info: I have 2 layers with people facing to the right. I am trying to flip one of them around so that the charaters are facing into each other)
I have been using photoshop cs4 since its release and yesterday the drop down menus at the top have started loading to the left instead of to the right. I have gone through recommended fixes from this forum and others and cannot fix the problem.
Â
- I reset the program preferences.
- Changed the handedness in the Wacom preference file.
- My tablet pc input panel was disabled to remove flicks…so I cannot access it.
- My trial copy of PhotoshopCC is not experiencing the problem
Â
I am using windows 7 64 bit home
I'm not sure to explain this but I have a "S" shape path with texts on it. The problem was the base of the texts snap to the right side and I want it to snap it to the lelft side of the path. How do I do this in Photoshop CS4?
View 12 Replies View RelatedThis may be a simple process but I just can't find how I can do it. Not even in the help document.
How can I resize of the image in a single layer without changing the other layers?
How can I flip the image in a single layer without affecting the other layers?
I know how to do that for the whole image but not for a single layer.
It was the "Creating Classy Glass Buttons" one. One of the steps says to flip the layer vertically. I can't quite figure out how to do that. It always wants to flip the whole thing.
I'm using PS7.
how to use the drawing tools in Photoshop. I've drawn a simple path, and select it with the Path Selection tool. The problem is when I go to Edit > Transform Path, the Flip Horizontal, Flip Vertical, and Rotate 90/180 options are disabled. I can use the other transform options as well as Free Transform Path without problem. Why am I not able to use features like Flip Horizontal?
View 2 Replies View Relatedneed to frequently flip canvas sometime,
View 9 Replies View RelatedI'm just getting to grips with paths.
Â
I have created a path, which I want to copy, then flip the copy in the vertical axis, then join it onto the original, yeilding a path that is vertically symmetrical.
Â
I can create the path OK, and I've figured out how to copy it.
Â
BUT .... when I go to Edit > Transform Path ... the flip vertical and flip horizontal options are greyed out.
Â
What am I doing wrong?
Â
I'm using CS4 Extended v11.0.
A few versions back I had what I remember as being an action to mirror and flip an image. I realize this can be done manually or create my own action but it was a great action and produced some really amazing images in no time. Any action or even a plug in that does this?
View 2 Replies View RelatedI've looked everywhere! I understand I can rotate but I need to flip it horizontally! Which I can't do! I looked all over for the y axis and x axis way to flip but it doesn't show! I've been on the internet for hours trying to figure this out! All I learned was how to rotate, not flip
View 1 Replies View RelatedUsing Acad 2010
Is there a way to remove the *Model* page setup entry from the list of Page Setups in the Page Setup Manager? This is the first time I am seeing *Model* in the list, and I suspect that it the reason I am not able to generate a PDF for this particular drawing. When I try, I get the following error:
=========================
Job: - Error(s) Did Not Plot
Job ID: 5
Sheet set name:
Date and time started: 2/1/2012 10:34:53 AM
Date and time completed: 2/1/2012 10:34:54 AM
UserID: AchrisK
Profile ID:
Total sheets: 1
Sheets plotted: 0
Number of errors: 1
Number of warnings: 0
Sheet: 123456-Model - Error(s) Did Not Plot
File: C:Drawings123456.dwg
Category name:
Page setup:
Device name:
Plot file path:
Paper size:
ERROR: Internal Error: Failed to get Plot Settings Dictionary.
==================================================
I have this idea that removing *Model* from the list will do it. In addition to causing PDF creation failure, I believe it is also responsible for forcing the Model to always be in the Publish list, even though I have unchecked the "Include model when adding sheets" option. I can remove it from that list manually, but it comes back every time.
I quite often need a separate ruler scale on each page of a multi-page document. The only way I know how to do this is to create a separate document for each drawing that requires a new scale.
I request that you add the ability to change the ruler scale on a per page basis within a single multi-page document.
I am using CDR X5 SP1.
Use merge for standard things like labels.Have a large ongoing project which requires
Lots of Excel data - eg: 6685.excel example.tifcolumns x AZrows x 300 upwards
All rows required to create a book of running information.
If I use a label type approach some rows  have less data making the layout uneven (unsuitable for the project)
Is there a way to merge with a fluid result ?
Ie row one takes up 2 lines Row 2 takes up 5 lines Row 3 takes up 1 line etcÂ
0728.excel example.tif
Several times a week I need to take a PDF (single-page doc), then convertto a page-sized PNG with quality good enough to read the text (and atransparent border), and then convert to a SWF. I have a PNG-to-SWFutility, but when I used it on the PNG saved after I opened my PDF andexported from GIMP, the end result was not good enough. A co-worker saidGIMP couldn't make a PNG (w/transparency) with enough quality. He said we'dhave to use some other software. Part of the issue was not being able toresize without losing quality before the PNG export. True or false?
View 3 Replies View RelatedAfter moving a page in my document the master page elements no longer display on screen or in print. If I move the page to a different location in the document the master displays but if it is in the specific position that it needs to be it will not display. The document has multiple Masters and others do work on the page but the one that I need will not. I've tried deleting the page and adding a new one and that does not fix the problem. I've checked and "Hide Master Items" is not checked. The page in question is in position 48 with F-Master applied. If I move it to position 49 it works, 50, it works, 51, or any other it works. If I apply a different master to the page, it works. If I delete the page, add a new page and apply F-Master it still does not work. The only page that this problem is happening on is page 48.
View 1 Replies View RelatedTrying to set up a datamerge file to create multi page spread documents with fields on different pages. Attempting to set it up so it's as automated as possible as there are up to 20 different merge documents needing to merge with up to 100 different csv records from the same file each week . The merge documents have different and repeated merge fields on most pages.Â
Â
I've set it up so that the document has facing pages, and most pages have images spread across the whole of the spread. the pages preview fine, they are created ok when using 'Create Merged Document' although the page numbers continue from one document to another (another problem). but when I come to export to pdf, then the merge only shows the image on the left spread but on both left and right spread single pages, and the page numbers don't show the correct page numbers eg it will go p1 p2 p1 p2 etc all the way through the document instead of p1 p2 p3 - p20 etc. I don't want to have to merge first then pdf but can't understand why the images and page numbers are not showing correctly.Â
If it's a bug, then I cannot believe it wasn't caught before the release. So here it is. I simply put artistic text down on page 1. Select the text and copy to clipboard. Add a new page and paste the text. On my computer, the text changes from artistic text (as copied to clipboard) to paragraph default text left justified across the center of the page. It doesn't matter how much text I select, it always pastes on the new page as paragraph text left justified and across the center of the page.
However, if I select artistic text and any other object, copy and paste to a new sheet, it works erectly. Apparently, I now have to select text and an object to insure that the paste feature works properly?
I am guessing this will be a no but is there a way to change page setup for more than 1 page at a time? Â I have multiple pages in a drawing that I want to change to all the same page setup.
View 3 Replies View RelatedThis was very easy to do in earlier versions of Illustrator, but now it seems like the only option is to make a separate artboard for each page tile!
View 1 Replies View Related