Photoshop :: Newly Installed CS6 Closes Immediately After Opening?
Oct 9, 2012
I just installed the adobe cs6 creative suite yesterday or the day before, but today was the first time I tried to launch PS. Each successive time that I've tried, I have gotten these two messages immediately after the program finishes loading:
I can't go to the preferences panel to attempt to fix the problem addressed in the first dialogue because PS will not stay open long enough to allow me to do so. I also googled the issue and the majority of people seemed to say that holding down ctrl+alt+shift as the program loaded would present me with a dialogue that would fix the problem, but when I tried it nothing happened.
View 6 Replies
ADVERTISEMENT
May 22, 2013
I click on a picture in My Pictures, I go to File, I click on Open WIth and if I am trying to open a NEF file, even though Photoshop Elements 11 comes as an option...picture will not open. And, same if I try a jpg or a tiff file..only there, PSE 11 does not even come up a s an option to open with. In all cases error reads...NOT VALID WIN32 application.
View 1 Replies
View Related
Nov 23, 2013
Photoshop closes immediately after starting up. Lightroom and Bridge works fine
View 1 Replies
View Related
Nov 21, 2012
My GIMP 2.8. closes down immediately after exporting an image. When I overwrite it, it doesn't happen. How can I prevent GIMP from closing down after exporting images?
View 3 Replies
View Related
Oct 20, 2013
Adobe 5 closes immediately when I click the "Print" button.
View 3 Replies
View Related
May 29, 2013
I just installed a new XFX AMD ONE 1GB 5450 video card and have updated the drivers, but Photoshop CS6 is not recognizing it.
View 2 Replies
View Related
Jun 22, 2009
I've installed some new fonts into my windows vista. The fonts were successfully installed and a check in Office reflected the new fonts. when i opened CS4, these fonts were not found in the list of characters.
View 6 Replies
View Related
Aug 30, 2013
How do I get a newly installed Cannonscan8800F Scanner to show up in " IMPORT "
View 8 Replies
View Related
Jul 19, 2012
I'm using a new install of Photoshop CS6 (via creative cloud) on a new iMac and getting superb performance aside from constant issues with the polygonal lasso tool.
All the other variants of the tool work fine without fault, but when using the polygonal selection , either the first 'point' won't register or subsequent 2nd or 3rd points won't register, causing photoshop to hang for a second then fill the marquee incorrectly.
I'm using a magic mouse and also tested it with a USB Logitech but still getting the same issue.
Â
3.4ghz Intel Core i7 Quad core iMac
16GB Ram
OS & Photoshop on a SSD
Scratch Disk 1TB internal HD
[code]...
View 5 Replies
View Related
May 9, 2013
A month ago I successfully installed 3 ICC profiles from a paper manufacturer and got them recognised by PSP X5. I now have 4 more profiles and have installed them but they are not recognised completely by PSP. If I open the Color Management box and click Basic Color Management, with Rending Intent 'Pictures', the printer profiles list in the dropdown shows only the three original profiles (plus a lot supplied by Canon for the MG650 printer concerned). If I select Proofing, the Emulated device profile dropdown list shows all 7 profiles (plus the Canon ones), so PSP is clearly to some extent aware of the new profiles.
I cannot remember exactly how I achieved the inclusion of my original three in the list, but I do have the printer concerned as the default primary printer, so cannot see that this is a problem. The profiles are recognised in the other software that I use, so they are definitely correctly installed.
View 1 Replies
View Related
Aug 23, 2013
I had trouble installing the program on Windows 7 after aborting on the first try when an error message about a font issue appeared and I wanted to find out more info. It took four retries, rebooting and adjusting my security settings I have it installed as a trial version (I think), but when I try to launch the program it goes through the initiallization process each time and then shuts down just as it is launching. Do I uninstall and start again from scratch? I have experience in installing 2000LT and 2004LT on various computers over the years with out ever having an installation issue.Â
View 1 Replies
View Related
Mar 27, 2013
INV Routed Systems 2011 sp2
I needed a specific Adobe font engraved on a nameplate.
I purchased and installed the font and it is available to me in other applications.
I went to use it within my sketch and it didn't display as being available.
Do I need to do something other than install the font on my machine to use it within my model?
Inventor Product Design Suite 2013sp2
Windows 7sp1 64-bit
nVidia Quadro 2000
View 7 Replies
View Related
Jun 21, 2013
I installed both PS CC and BR CC for a second time and received and installed the first updates for CR 8.1 but still I cannot open PS CC without it closing on me immediately again. And when I try to open any photo in PS CC from Bridge CC I get asked if I want to save that file before I close PS CC. With no alternative to do anything else.
View 3 Replies
View Related
Apr 15, 2013
Just upgraded to MAP 3D 2013 - when I click on the icon or type command qvlayout, the view of the layouts opens momentarily but then closes again instantly. Seems to do it randomly - I'll be using the command and it works as per usual but then it starts to act up. Doesn't seem to matter where I place the cursor, or what (if any) other drawings I have open. I've never had this issue with earlier versions..
View 1 Replies
View Related
Jun 14, 2006
When I try to create a new document or open an existing one in either ps 7 or CS, it closes. This happens everytime.
Previously they were both saying "cannot create new document because of program error" but I deleted the preferences, and now they do this...
I've re-installed CS twice now.
When I try photoshop in another account it does the "could not create a new document because of program error" message.
I have a 1.33 GHZ PowerPC G$, 512 Ram, OS X version 10.4.6
Photoshop used to work fine, and then one day randomly had the error message, and now closes when i create or open documents.
View 1 Replies
View Related
Jul 31, 2012
This just started happening really recently and I'm not sure at all what the cause is, soWhen opening or saving files, Photoshop displays this error message and closes itself:
Â
Runtime Error!Program: C:Program Files (x86)AdobePhotoshop 7.0Photoshop.exe
Â
R6025- pure virtual function call
Â
and here is a picture of the error message:[URL]...it pops up when saving and opening certain files, but not others. I can't figure out what causes it to happen for particular ones since they are not all in the same location, or the same file type.I am using Windows 7 64bit and this is Photoshop 7.0
View 2 Replies
View Related
Sep 27, 2013
I've been trying to replicate the problem, but it appears to be intermittent. It happens on multiple computers, we're using 2.8.4 on Windows 8 at the moment.
Scenario: GIMP is open with multiple files.
Browse a folder in explorer and select OPEN WITH GIMP or just OPEN. And a GIMP startup splash screen appears and reloads the GIMP application automatically closing and losing any work that was in progress on the prior GIMP screens.
View 3 Replies
View Related
Dec 18, 2013
It was working perfectly fine over the weekend and then Monday I open illustrator and try to open a drawing I was working on and it closes on me everytime. Now I can't open or save files without it closing itself. I would uninstall and reinstall it but i lost my code. I have to make vector images for a couple of clients of mine!
View 2 Replies
View Related
Feb 3, 2012
If I work in Edit mode all the time I can open as many pictures as I like from the Organizer and have them all open at the same time. If I return to the Organizer and open another image, the ones already open are not affected. However if I go to the Manager tab (which only seems to be the Organizer on a separate page) to select an image I have to close any and all items already open in the editor. Surely this cannot be intended behaviour. In X3 it was possible to open images in the Organizer which was on a separate page and then return to it and open others without the original ones closing so why can't we do this in X4? The Manager does allow multiple images to be selected and opened at the same time but these are still closed if at any time you return to the Manager.
Update: I have now read a few posts about this problem and indeed it is not possible to switch between Edit and Manage modes without closing any images you have open for editing. The general feeling seems to be that this is not a problem as the Organizer (File manager) is available in Edit mode anyway so there is no need to go to the Manage tab. However I would disagree with this as some of my folders contain large numbers of images and it is much easier to browse through them using Manager in thumbnail mode as you can see far more images at once than with the Organizer in Edit mode. Also I find that Organizer gets in the way in Edit mode and would much prefer to switch back and forth to the Manager as was possible in X3.
Even if this problem does not affect everyone it is still difficult to understand why Corel would insist that images in the Editor are closed before switching to Manage mode. I cannot personally think of one reason why this would be preferable. Additionally the Organizer in Edit mode does not appear to have any way of resizing the thumbnails to optimize the number viewable at any one time.
View 3 Replies
View Related
Mar 24, 2014
why cant illustrator create outlines of fonts not installed on the computer when opening an eps or pdf as corel can?
View 2 Replies
View Related
Dec 6, 2011
I noticed, that in X4 my file ( in which I'm working) is lost, if I open a new file from the organizer.
In older versions, I could have a lot of pictures on my screen and switch between them.
Is this a "bug" in X4, or is there a way to put this feature back like X2.
Hope the question is clear??
View 8 Replies
View Related
Nov 23, 2012
cs6 upgrade is installed, do I need to keep CS4 installed?
View 7 Replies
View Related
May 14, 2012
I'm having issues with the 64-bit version of Photoshop CS6. Immediately after attempting to open an existing file or create a new one, Photoshop completely freezes, with no error messages/dialogues, and I end up having to force close it from Windows Task Manager. This happens every single time. I had this same issue with the beta, and it continues into the full release. I've tried uninstalling and re-installing it multiple times to no avail.
Â
I haven't had this issue with previous versions of Photoshop (CS 5 & 5.5), and the 32-bit version of CS6 runs fine. However, for obvious reasons, I would prefer to use the 64-bit version of the software to take full advantage of what my machine is capable of.I'm running this on a HP Envy 17 laptop, with an Intel Core i7 processor (1st-gen), an AMD Radeon HD 5850M graphics card, and 8GB of RAM.
View 15 Replies
View Related
Mar 20, 2009
When I make a change to my image (paste, deletes, fills or make layer adjustments) the picture doesn't update until I zoom in or out or click on another tool.
View 3 Replies
View Related
Nov 21, 2013
Photoshop CC shuts down immediately after it´s started. There no different if i start it from Lightroom or direct. I just install PS cc and lightroom i have a windows 7 laptop.
View 5 Replies
View Related
Oct 17, 2008
After an apparent successful install of Photoshop CS4, both with a valid serial number and as a trial, PS crashes at the blue splash screen with "encountered error and needs to close", and just shuts down.
My system is a Core2Quad, 9550, running Vista Ultimate 64, 8 gb ram, with a ATI 4850 512 MB card. This is a virgin computer built for Lightroom 2 (which runs like hell on the machine) and PS, with NO other apps running except virus protection. (AVS? that came with the mother board.)
support files, all of the MB, Vista, and ATI drivers updated, talked to support for one hour, and still no resolution. I do know that it generates the GPUInitfail file, but does still not launch or get any further after it generates that file. I have cleared temp, prefetch, re-installed several times and still nothing.
View 11 Replies
View Related
Jan 20, 2013
I have an infuriating problem with Elements 4 crashing immediately after an install on mac OSX 10.4.11, I was given the computer, which still had Elements 4 on it although it always crashed on opening, i removed the program and bought a 2nd hand hard copy of Elements 4 from eBay.When i install the new copy it opens up with the "credits" but at the bottom right it still shows the past owners name as licensee briefly, then crashes before fully opening.
View 3 Replies
View Related
Oct 6, 2008
CANON EOS "50D" should be included as newly supported camera RAW as soon as possible. Which has been already on sale since 27th September.
View 1 Replies
View Related
Jul 16, 2013
First Photoshop doesn't recognized my GPU which is Nvidia GTX 680M. I'm using a new Alienware R4 with Win8 pro.
Photoshop CS6 doesn't recognize my NVIDIA GeForce GTX 675M GPU?
[URL]
Â
After following the instruction now Photoshop CC is supposely using my NVIDIA GPU, but it immediately crashed after launching, for both 32 bits and 64 bits. My NVIDIA driver version is 320.49 600 series, the latested one I just updated. If I deselect the NVIDIA option in the control panel I no longer suffer the crash problem but as you know there is a reported problem with Intel HD4000 integrated GPU where screen flickering keeps happening if you use a toolbox. To avoid the problem the only thing I can do is to deselect the use GPU option in CC option (changing the mode advanced setting doesn't work). By deselcting the GPU option get rid of the problem but there is another problem with zooming: it cannot zoom in real time anymore, instead it's having a toolbox where you choose a reagion and it will jump to that region, and I can only zoom in by doing this, not zooming out.
Â
So basically I had a problem with NVIDIA which crashes CC immediately and a problem with Intel HD4000 integrated GPU with flickering screen and another problem with no GPU selected where I cannot zoom in real time. Whatever I do always give me some sets of problem that I can't solve.BTW I haven't try CS6 yet, I may proceed to download a trial copy and I thought CC and CS6 are using the same core. Nevertheless, those problem should definately be looked into.
View 4 Replies
View Related
Dec 18, 2012
I'm attempting to use CS3 on a Dell laptop- 64 bit- Windows 7.
Â
When first installed it worked fine, then suddenly it was non-functional. It will open, but ANY request at all will cause it to freeze. I have to close it through Task Manager. I get no error messages, and when I went in to view the event viewer there is nothing there under Applications.
Â
I've changed the default printer to a non-network but haven't done much else as I don't have administrative privileges on this (work) computer. We tried uninstalling and reinstalling and that did nothing.
View 5 Replies
View Related
Aug 13, 2002
When creating the first new layer via copy in Ph6, it is always locked to the background layer. A small but inconvenient feature.
View 6 Replies
View Related
