Photoshop :: CS6 Immediately Freezes?
May 14, 2012
I'm having issues with the 64-bit version of Photoshop CS6. Immediately after attempting to open an existing file or create a new one, Photoshop completely freezes, with no error messages/dialogues, and I end up having to force close it from Windows Task Manager. This happens every single time. I had this same issue with the beta, and it continues into the full release. I've tried uninstalling and re-installing it multiple times to no avail.
I haven't had this issue with previous versions of Photoshop (CS 5 & 5.5), and the 32-bit version of CS6 runs fine. However, for obvious reasons, I would prefer to use the 64-bit version of the software to take full advantage of what my machine is capable of.I'm running this on a HP Envy 17 laptop, with an Intel Core i7 processor (1st-gen), an AMD Radeon HD 5850M graphics card, and 8GB of RAM.
View 15 Replies
ADVERTISEMENT
Dec 18, 2012
I'm attempting to use CS3 on a Dell laptop- 64 bit- Windows 7.
When first installed it worked fine, then suddenly it was non-functional. It will open, but ANY request at all will cause it to freeze. I have to close it through Task Manager. I get no error messages, and when I went in to view the event viewer there is nothing there under Applications.
I've changed the default printer to a non-network but haven't done much else as I don't have administrative privileges on this (work) computer. We tried uninstalling and reinstalling and that did nothing.
View 5 Replies
View Related
Feb 21, 2013
Anytime I import a piece of Clipart and I go to the Trace bitmap button>outline trace>line art the program freezes immediately. The diagbox doesn't even pop up, nor does it say "not responding" at the top.
I am running Win 8 but it has been running for months without a hitch. I have cleaned out temp files and reinstalled the suite and nothing happened.
View 7 Replies
View Related
Mar 20, 2009
When I make a change to my image (paste, deletes, fills or make layer adjustments) the picture doesn't update until I zoom in or out or click on another tool.
View 3 Replies
View Related
Nov 21, 2013
Photoshop CC shuts down immediately after it´s started. There no different if i start it from Lightroom or direct. I just install PS cc and lightroom i have a windows 7 laptop.
View 5 Replies
View Related
Nov 23, 2013
Photoshop closes immediately after starting up. Lightroom and Bridge works fine
View 1 Replies
View Related
Oct 17, 2008
After an apparent successful install of Photoshop CS4, both with a valid serial number and as a trial, PS crashes at the blue splash screen with "encountered error and needs to close", and just shuts down.
My system is a Core2Quad, 9550, running Vista Ultimate 64, 8 gb ram, with a ATI 4850 512 MB card. This is a virgin computer built for Lightroom 2 (which runs like hell on the machine) and PS, with NO other apps running except virus protection. (AVS? that came with the mother board.)
support files, all of the MB, Vista, and ATI drivers updated, talked to support for one hour, and still no resolution. I do know that it generates the GPUInitfail file, but does still not launch or get any further after it generates that file. I have cleared temp, prefetch, re-installed several times and still nothing.
View 11 Replies
View Related
Jan 20, 2013
I have an infuriating problem with Elements 4 crashing immediately after an install on mac OSX 10.4.11, I was given the computer, which still had Elements 4 on it although it always crashed on opening, i removed the program and bought a 2nd hand hard copy of Elements 4 from eBay.When i install the new copy it opens up with the "credits" but at the bottom right it still shows the past owners name as licensee briefly, then crashes before fully opening.
View 3 Replies
View Related
Jul 16, 2013
First Photoshop doesn't recognized my GPU which is Nvidia GTX 680M. I'm using a new Alienware R4 with Win8 pro.
Photoshop CS6 doesn't recognize my NVIDIA GeForce GTX 675M GPU?
[URL]
After following the instruction now Photoshop CC is supposely using my NVIDIA GPU, but it immediately crashed after launching, for both 32 bits and 64 bits. My NVIDIA driver version is 320.49 600 series, the latested one I just updated. If I deselect the NVIDIA option in the control panel I no longer suffer the crash problem but as you know there is a reported problem with Intel HD4000 integrated GPU where screen flickering keeps happening if you use a toolbox. To avoid the problem the only thing I can do is to deselect the use GPU option in CC option (changing the mode advanced setting doesn't work). By deselcting the GPU option get rid of the problem but there is another problem with zooming: it cannot zoom in real time anymore, instead it's having a toolbox where you choose a reagion and it will jump to that region, and I can only zoom in by doing this, not zooming out.
So basically I had a problem with NVIDIA which crashes CC immediately and a problem with Intel HD4000 integrated GPU with flickering screen and another problem with no GPU selected where I cannot zoom in real time. Whatever I do always give me some sets of problem that I can't solve.BTW I haven't try CS6 yet, I may proceed to download a trial copy and I thought CC and CS6 are using the same core. Nevertheless, those problem should definately be looked into.
View 4 Replies
View Related
Oct 9, 2012
I just installed the adobe cs6 creative suite yesterday or the day before, but today was the first time I tried to launch PS. Each successive time that I've tried, I have gotten these two messages immediately after the program finishes loading:
I can't go to the preferences panel to attempt to fix the problem addressed in the first dialogue because PS will not stay open long enough to allow me to do so. I also googled the issue and the majority of people seemed to say that holding down ctrl+alt+shift as the program loaded would present me with a dialogue that would fix the problem, but when I tried it nothing happened.
View 6 Replies
View Related
Jun 21, 2013
I installed both PS CC and BR CC for a second time and received and installed the first updates for CR 8.1 but still I cannot open PS CC without it closing on me immediately again. And when I try to open any photo in PS CC from Bridge CC I get asked if I want to save that file before I close PS CC. With no alternative to do anything else.
View 3 Replies
View Related
Nov 6, 2012
am new user of photoshop elements and i have on problem : when i try to open one picture / Photoshop stop immediately... why ?
View 1 Replies
View Related
Sep 7, 2012
I am working in AutoCad MEP 2013 and have some drawings where I have xref'd in a tif file for a background. When I initially open the drawing the tif has to be reloaded. If I do this right away after opening the drwing it says it cant be found. If I wait let's say 5-10 minutes and go back and try again then it will load. the tif is set to relative path. It's like the computer is taking a long time to find the file. This is not happening with every drawing in which I have an xref attached to a drawing. Sometimes all the background load immediately and sometimes they behave like this.
View 1 Replies
View Related
Dec 1, 2013
Illustrator CC Version 17.0.1 crashes immediately after opening.
View 5 Replies
View Related
Aug 4, 2010
This behavior started in LR2. Thinking back it may be related to OSX upgrade to Snow Leopard. After I hit print, the print job is sent to the printer and almost immediately “disappears” like nothing was sent. I have also gotten an error message of “/Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpll.app/Con tents/MacOS/rastertoescpll failed”. This only occurs in Lightroom. My workaround is to take the image into Photoshop and print from there. This happens with both of my Epson printers and also with an HP LaserJet, so I think it is a LR problem and not an Epson problem. All drivers for all printers updated to latest available for Snow Leopard. The behavior continued with LR3. Fixed itself for awhile, then in the middle of printing a series of prints, started again. I cannot print from within LR at all. MacBook Pro 2.16 core 2 duo, OSX 10.6.4, LR3, Photoshop CS3.
Through google searches I found the “rastertoescpll failed” issues reported after Snow Leopard, but they were related to Epson printers, and not just LR related and fixed with driver updates. This has not worked for me.
I really like the LR print module.
View 2 Replies
View Related
Oct 20, 2011
Our company is using 2012Lt and has a couple (3) regular templates we use. The problem is I have to keep going back to the templates and clean them out (txt styles, layers, etc) and what I suspect is happening is that someone starts a new dwg does some work and the auto save kicks in before they "save as".
Question, is there a way to force someone to "Save As' immediately after they start a new dwg?
View 3 Replies
View Related
Nov 21, 2012
My GIMP 2.8. closes down immediately after exporting an image. When I overwrite it, it doesn't happen. How can I prevent GIMP from closing down after exporting images?
View 3 Replies
View Related
Apr 2, 2012
I started having this problem today: Whenever I try to insert a block (either from the command line or the pull-down menu), the dialog box appears for a fraction of a second and immediately vanishes. There are no options on the command line after this, and the main window loses focus. At first I thought it was somehow ending up behind the main window, but that's not the case. Hitting escape brings focus back and the program runs fine otherwise until I try and use the insert command again.
I installed the SP1 update earlier today, but this problem didn't start happening until hours after that. I then tried to do a fresh install, and the problem was still there before I reinstalled SP1, so I don't think that's the problem.
This first starting happening after creating a block, the same way I always do, but I don't see what I could've done. This problem isn't limited to a specific drawing of mine, it happens with all my files as well as new ones.
View 1 Replies
View Related
Apr 18, 2013
Probably a very simple problem, but I have just installed the program for the first time and do not yet know my way around it. But when I pull photos in from my digital camera directory, they immediately display a warmer orange hue. However, I have not touched any of the settings at all. If I immediately export the photo, it matches the original on my HD. So there seems to be some kind of calibration problem with the real jpeg colors and the colors on screen in Lightroom. What can I do about this?
FURTHER DETAILS:
When I hit IMPORT and have the photo selection window come up, all the colors are fine. When I select a photo and actually import it, the colors are orangey. Where the heck is this change of color coming from? All I have done is install the program! I haven't adjusted anything.
View 5 Replies
View Related
Feb 17, 2012
When trying to open, then immediately the error occurs.
View 1 Replies
View Related
Apr 15, 2013
Just upgraded to MAP 3D 2013 - when I click on the icon or type command qvlayout, the view of the layouts opens momentarily but then closes again instantly. Seems to do it randomly - I'll be using the command and it works as per usual but then it starts to act up. Doesn't seem to matter where I place the cursor, or what (if any) other drawings I have open. I've never had this issue with earlier versions..
View 1 Replies
View Related
Feb 6, 2013
I've noticed that when you press the space key to end a line when you drawing with the bézier tool, it automatically takes you to the pick tool. So if you want to draw another line right away, you have to switch back to the bézier tool. It would be nicer to have a one-step means of doing this. Does any exist?
View 7 Replies
View Related
Apr 2, 2013
I installed X6 today and when I got to start the program it stops running immediately. When I click on the icon the start up window appears but then freezes on "Creating Application Environment" and then just stops running. I am trying to run x6 on a relatively new hp pavilion g6 laptop.
View 3 Replies
View Related
Oct 4, 2010
I am having a problem with AutoCAD crashing without fully loading. I will get the splash screen and the application background will momentarily appear with "AutoCAD 2011" in the title bar then it will all disappear with no visible error message. By checking ACD2011ENUAdlm.log in C:Documents and SettingsAll UsersApplication DataAutodeskAdlm I get the following error message:
3536 2010/10/04 10:05:39 Reason=Fatal error
View 9 Replies
View Related
Oct 20, 2013
Adobe 5 closes immediately when I click the "Print" button.
View 3 Replies
View Related
Jul 31, 2012
In the Library and Develop modules, when I click on an image to magnify it to 1:1, the image expands to 1:1 and then immediately returns back to fit/fill (depending on what the setting was before). Clicking on 1:1 magnification in the Navigator works fine as well as using the CMD + shortcut; the image expands to 1:1 and stays at 1:1 magnification. I am running LR 4.1 on Mountain Lion on a MBP. I tested in other programs and had no problems.
View 7 Replies
View Related
Oct 3, 2013
I'm running into a problem whenever I use multi frame rendering in the ram preview. If the machine is rendering and I don't have After Effects as the active application or whenever I stop playback of the ram preview, the cached frames are immediately deleted. I can see the green line moving forward as the image is rendered, but the second I stop the preview (or if AE is rendering in the background and I don't click back to it in time for it to begin playback) then the frames are gone and the green line disappears and I cannot scrub through the rendered frames.
If I disable multi frame rendering, then the green line and the cached frames remain in the preview window, and I can scrub through them like normal; they do not clear. Only when multi frame rendering is enabled does it disappear after render.
I know the frames are saving, because I have 32 GB set on my SSD for the disk cache (I also put them on an external HDD to test with the same results). It will fill up that 32GB of space presumably with the cached frames that disappear after render, but they are not accessible. I also have 16GB of ram, with plenty free for AE to use for caching (3GB per core = 12GB set for AE ram preview). I have not had this problem of the frames clearing until AE CC.
The only thing I can think that would be different from other times when I've not had this problem is that I'm using ProRes 422 (LT) clips in the compositions. But I don't know why they would cache normally without multiframe and then be immediately deleted with it enabled.
And no, rendering without multiframe is not an option. RAM previews take four times as long with single frame rendering, and I don't want to sit at my computer all day waiting for previews. This is extremely frusterating, as I must have AE open as the foremost program at all times. If I miss that crucial moment where the render completes and click back to the program a second late, all the frames are gone and I must rerender again! It happened twice while writing this message.
So what's the deal?
Specs:
AE CC 12.0.0.404
Retina Macbook Pro / OSX 10.8.5
2.6Ghz Core i7
16GB RAM
512 GB primary SSD (where footage & cache is located)
3TB 7200rpm cache drive
View 6 Replies
View Related
Nov 25, 2012
I am wondering if this could really be the intended LR behaviour? I start from a smart collection, one of the criteria is "has no adjustments".
Ok, as soon as I move the first slider in develop module, it no longer matches that criterion. But that should be no reason for LR to force me to immediately stop the develop edits on the selected image.
It immediately unselects, and I stay in Develop module with a grey window and the message "no image selected". (It does not move on to the next image, which still matches the criterion.)
I would expect that when I return to Library module, it would return to the same smart collection where I started, but I would not find my last developed images there, as they no longer match the criterion. But that LR grabs it immediately out of my develop selection?
Strange enough it stays the same, when I first explicitely selected all images while in Library/smart collection.
My expectation would be that I have this selection fixed to work on in Develop module. Similar to when I select any images from survey view and go to Develop module.
But no, the only workaround I found is:
Start from the smart collection, ctrl a to select all, then arbitrarily click on another collection withput this criterion - selection stays fixed - then move over to Develop module.
This is LR4.1 on Win7.
Definitely my functional specification would be: never take off an image from Develop unless the user moves on to another image. So ignore from where an image was picked.
Would you consider this a bug? Or a "feature"?
Do you see the same in LR4.2 or 4.3RC? Behaviour on a Mac?
View 2 Replies
View Related
Apr 4, 2013
I would like to instantly launch an External Rule just by clicking on a button in the Global Forms area of the iLogic browser. Is this possible, and if so, how would I do it?
Product Design Suite Ultimate 2014 | Vault Basic 2014 (SP1)
Dell Precision M6600 | Intel i7-2820QM - 16GB
nVIDIA Quadro 4000M | Windows 7/64 Pro
View 2 Replies
View Related
Dec 10, 2013
Having some trouble with the oppacity on my projects. As you can see from the screenshot, I've clearly clicked something because any text or images that I try to add to my project and set the oppacity at 0% - to then build over a few seconds to 100%, will not do this.Yet previous elements that I've added will.
Is there something I need to click to stop the new text and images from changing oppacity immediately. I want them to build over time - I can see that the added keyframe looks different also.
View 3 Replies
View Related
Sep 29, 2008
Photoshop CS3 freezes after making an adjustment layer using levels. A description of where the picture is located on the computer (usually only seen as a mouse over) appears and is also frozen.
I am unable to save the file and have to end the program and lose everything if it is not already saved. I have Windows XP with service Pack III. I do not have this problem with CS2. I would appreciate any ideas.
View 3 Replies
View Related
