Paint Shop Pro :: X5 Not Recognizing Newly Installed ICC Profiles?
May 9, 2013
A month ago I successfully installed 3 ICC profiles from a paper manufacturer and got them recognised by PSP X5. I now have 4 more profiles and have installed them but they are not recognised completely by PSP. If I open the Color Management box and click Basic Color Management, with Rending Intent 'Pictures', the printer profiles list in the dropdown shows only the three original profiles (plus a lot supplied by Canon for the MG650 printer concerned). If I select Proofing, the Emulated device profile dropdown list shows all 7 profiles (plus the Canon ones), so PSP is clearly to some extent aware of the new profiles.
I cannot remember exactly how I achieved the inclusion of my original three in the list, but I do have the printer concerned as the default primary printer, so cannot see that this is a problem. The profiles are recognised in the other software that I use, so they are definitely correctly installed.
I'm having strange things go on with Paint Shop Pro. One, it stopped automatically recognizing the camera when I plug it in to upload new photos. Now I have to tell it to open the camera, and, even if I have 100 old photos and 25 new ones, it uploads all of them again! Second, the file names have changed for the photos. They've always been the date "20132713_*.jpg". Now it opens them as "001.jpg, or 002.jpg, etc. How can I get it to go back to opening with the date as the file name.....and recognizing the camera and automatically open new photos in the camera?
I just installed the adobe cs6 creative suite yesterday or the day before, but today was the first time I tried to launch PS. Each successive time that I've tried, I have gotten these two messages immediately after the program finishes loading:
I can't go to the preferences panel to attempt to fix the problem addressed in the first dialogue because PS will not stay open long enough to allow me to do so. I also googled the issue and the majority of people seemed to say that holding down ctrl+alt+shift as the program loaded would present me with a dialogue that would fix the problem, but when I tried it nothing happened.
I've installed some new fonts into my windows vista. The fonts were successfully installed and a check in Office reflected the new fonts. when i opened CS4, these fonts were not found in the list of characters.
I had trouble installing the program on Windows 7 after aborting on the first try when an error message about a font issue appeared and I wanted to find out more info. It took four retries, rebooting and adjusting my security settings I have it installed as a trial version (I think), but when I try to launch the program it goes through the initiallization process each time and then shuts down just as it is launching. Do I uninstall and start again from scratch? I have experience in installing 2000LT and 2004LT on various computers over the years with out ever having an installation issue.Â
I click on a picture in My Pictures, I go to File, I click on Open WIth and if I am trying to open a NEF file, even though Photoshop Elements 11 comes as an option...picture will not open. And, same if I try a jpg or a tiff file..only there, PSE 11 does not even come up a s an option to open with. In all cases error reads...NOT VALID WIN32 application.
I am using W 7 and PSP X3.My printer crashed and I have replaced it with a new one.It is an HP 8600.I have it connected to my laptop using a wireless connection which is the way my previous printer was connected.I have prepped 2 photos that the Mrs wants a 5 x 7 copy of each.I then click on File > Print Layout and get an error message saying There is no default printer installed.
The printer is known to the computer as I have printed from MS Word and I have scanned from the scanner to the computer.How do I get PSP to know the printer?
I have a problem with Illustrator CS6 on Win7 x86 on one of our users' machines. The font Arial Narrow is installed, MS Word / Framemaker pick it up and you can use it, but Illustrator and InDesign won't see the font. So my user can't use Arial Narrow as the family so can't select the font for bold/italics/underline. He can only choose narrow as a sub style of the Arial family, but Arial Narrow has been installed seperately.  The font has also been placed in the Common subfolder for adobe softwares, but after that it still won't be found.What has been tried:  Uninstall and Reinstall the fontAdd font to font folders for adobe products (both common and product specific)Clearing Windows and Adobe font caches ..All these steps have not solved our problem.
I'm using a new install of Photoshop CS6 (via creative cloud) on a new iMac and getting superb performance aside from constant issues with the polygonal lasso tool.
All the other variants of the tool work fine without fault, but when using the polygonal selection , either the first 'point' won't register or subsequent 2nd or 3rd points won't register, causing photoshop to hang for a second then fill the marquee incorrectly.
I'm using a magic mouse and also tested it with a USB Logitech but still getting the same issue. Â 3.4ghz Intel Core i7 Quad core iMac 16GB Ram OS & Photoshop on a SSD Scratch Disk 1TB internal HD
I am using Paint Shop Pro X6. I am an experienced Paint Shop user. Today, I must have done something strange, because now when I use the clone tool, instead of getting what normally occurs, the cloned area consists only of large dots--similar to what a half-tone photograph looks like under high magnification. The dots are the proper color.
Is there a way to reset Paint Shop Pro to default settings as the software existed when it was installed? That might solve my problem.
How to make the printer profiles made by the COLOR MUNKI PHOTO work in PSPX4?
I have tried a lot of different settings in the Color Management of PSP X4, in the Color Management of Windows (Win 7), and in the Printer Driver (Epson Stylus NX300), all with no success.
I also have problems when trying to SOFT PROOF these profiles in PSPX4: what I get is an unusable image covered with a deep fog, an image that is far from what is printed. And I know these printer profiles are good because they work correctly in Photoshop Elements 10.
I have installed LR 4.2 RC but when I check Lens Profiles these lenses are not listed although ACR 7.2 is supposed to be supporting them. Where I can get the profiles for these lenses and what is the proper procedure to install them?
I have downloaded and installed the icc profiles for my favourite Canson and Crane Museo papers on my new Macbook Pro but they don't show up in the options box in the LR 4 print module.
We upgraded to x6.1 and are having some issues. I have X5 and X6 installed on my machine. When using X6 and you add a new page to the document, then publish a PDF. The PDF will show grid lines on the new pages. This happens with new docs and previously created docs when we add new pages. Also, on the new pages, you can't disable the printing in the object manager.Â
Second problem, when you have a bitmap in your document and click on it, Photo Paint is available. Only the trace option. Edit Bitmap is grayed out on the Property Bar and not available when you right click the image. I have to open Photo Paint and copy the image into it. There are three of us having the same problems.Â
Most of the designs require some unique font to get the desired effect. Most likely, we'd search the web for one, download it, use it and discard it. We don't wanna keep all these single-use fonts installed. It would be great if we can load a font in to PDN by just browsing for it using a file dialog. I think Photoshop lets you drag and drop a font to its main window and till let you use it for that session. When you exit the application, the font is unloaded.
Can this be supported? Of course, there is a workaround: Use a font manager app. But, I think it's a pretty good feature to have in a image editor never the less
I downloaded and installed the Shaped Gradient Plugin from here:
[URL]
Installed in the Effects folder as per usual.
When I restarted PDN (several times) and I just can't seem to find where the plugin is. I have been through the Effects and submenus with a fine tooth comb each time but it's not there....
Using Paint.NET v3.5.10 (Final Release build 3.510.4297.28964)
Just came upon an error I had not seen before. Though PSP no longer supports Animation Shop, up until PSP X4, the user has been able to export frames back to PSP from Animation Shop. Now, this no longer works! There's still some communication there, because an error message - which, incidentally, makes absolutely no sense at all - is generated in PSP X4:
I installed PSP X4 today on a new PC with Windows 7 and noticed that it has no Animation Shop. Can I install Animation Shop to this machine? Will it work without PSP 9 or does it need certain dlls from PSP 9 ? I really want to be able to use Animation Shop again.
I am having some issues with surface profiles on a dreffed alignment no updating dynamically.
Currently it requires me to set them to static, then back to dynamic and they update.
I am well aware of the issue of dreffed surface profiles staying static. I am using the work around of dreffing in the surface and sampling in the drawing using the dreffed alignment.
if is possible to create the paint drips in the attached design. I really want to learn how to create urban designs, is corel paint shop x3 suitable for that?
