Paint Shop Pro :: No Default Printer Is Installed
Apr 9, 2013
I am using W 7 and PSP X3.My printer crashed and I have replaced it with a new one.It is an HP 8600.I have it connected to my laptop using a wireless connection which is the way my previous printer was connected.I have prepped 2 photos that the Mrs wants a 5 x 7 copy of each.I then click on File > Print Layout and get an error message saying There is no default printer installed.
The printer is known to the computer as I have printed from MS Word and I have scanned from the scanner to the computer.How do I get PSP to know the printer?
View 1 Replies
ADVERTISEMENT
Oct 13, 2013
I am using Paint Shop Pro X6. I am an experienced Paint Shop user. Today, I must have done something strange, because now when I use the clone tool, instead of getting what normally occurs, the cloned area consists only of large dots--similar to what a half-tone photograph looks like under high magnification. The dots are the proper color.
Is there a way to reset Paint Shop Pro to default settings as the software existed when it was installed? That might solve my problem.
View 2 Replies
View Related
Mar 6, 2013
how to change the printer associated with PSP or add another printer? I have 2 printers installed on Windows7 but the only one I get when I try to print from PSP is the wide format printer & no option to add another. Is printing from Windows Photo Viewer my only option?
View 6 Replies
View Related
Aug 27, 2013
Such as preset shapes? I downloaded all kinds of content in X5 but it does not show up in X6.
View 2 Replies
View Related
May 9, 2013
A month ago I successfully installed 3 ICC profiles from a paper manufacturer and got them recognised by PSP X5. I now have 4 more profiles and have installed them but they are not recognised completely by PSP. If I open the Color Management box and click Basic Color Management, with Rending Intent 'Pictures', the printer profiles list in the dropdown shows only the three original profiles (plus a lot supplied by Canon for the MG650 printer concerned). If I select Proofing, the Emulated device profile dropdown list shows all 7 profiles (plus the Canon ones), so PSP is clearly to some extent aware of the new profiles.
I cannot remember exactly how I achieved the inclusion of my original three in the list, but I do have the printer concerned as the default primary printer, so cannot see that this is a problem. The profiles are recognised in the other software that I use, so they are definitely correctly installed.
View 1 Replies
View Related
Aug 8, 2012
Is there a finite number of plugins that can be installed with PSPX4?
View 2 Replies
View Related
Apr 10, 2013
The printer setting - I could never save it.For my label printer LP2844, every time I print, it defaults to Width=4.88 and Height=11.00 and some unprintable area settings. Every time I do my first printing, I have to change it (to 4"x6"). I have gone thru my Windows printer device setting (properties, preferences, advanced, etc) and I have removed the printer device, deleted and driver, reinstalled everything and it still does it.Then I try it on another PC. Same thing.Paint shop Pro X4 Pro V14.3.0.3 licensed version. I paid for it.It seems like Paint shop saves its own printer saving somewhere and I can't re-save it.
View 1 Replies
View Related
Jan 25, 2012
I have a Lexmart Pro 705 printer. The problem also occurred with a canon printer. This also happens with both my Laptop ,and desktop computers.
I will edit a picture so that it looks great on my computer screen , then when I print it on good Kodak paper ,it will be several shades darker. The old photoshop programs had a preference so that you adjusted to the printer. I know there has to be a trick to this.
View 1 Replies
View Related
Nov 23, 2012
6 months ago I purchased a new computer with Windows 7 Home Premium. I reinstalled Paint Shop Pro X4 but have not used it much since then. Recently I wanted to print some photos and I was very disappointed that the results were VERY red. I have a Canon MP600 printer that I have used for several years with very good results. With my old computer (on Win XP) the difference between the monitor and printer was minimal. I am not familiar with the technical jargon relating to color management and relied on the operating system to do a satisfactory job. I only use PSP as a hobby and am not as picky as most photographers but this was very disappointing. I also tried printing some graphics as might be used in a brochure and the colors were too red. I cleaned the print heads as per the Canon instructions and all 5 ink cartridges are full. I might also mention that grayscale images print looking similar to sepia although they are grayscale on the monitor.
don't get too technical as I don't really understand this whole "color management" thing.
View 7 Replies
View Related
May 8, 2013
I'm using Paint Pro X5 and I have a Canon MX700 printer. The colors from my PaintShop pics are awful when I print them. They don't look anything like the picture in PaintShop. Is there a way or a software program I can use to calibrate the colors between PaintShop and my printer so what I print looks like what's on my PaintShop screen?
View 1 Replies
View Related
Mar 2, 2008
I recently got a new computer, with Windows Vista. I used my wife's existing CD to install Paint Shop Pro 7 (from 2001 - yikes!). It seems fine, except for a few of the preferences. The BIG problem is that the [Printer] button on the Page Setup dialog no longer appears! Here's the verbiage from the PaintShopPro7 user guide:
6To surround the image with a color, click the Background button. When the Color dialog box opens, choose the color. The area of the paper from the image edge to the paper margin will be covered with this color.
7Click the Printer button to open the printer.
8Click OK to close the dialog box and save the settings.
View 6 Replies
View Related
Aug 22, 2012
How to make the printer profiles made by the COLOR MUNKI PHOTO work in PSPX4?
I have tried a lot of different settings in the Color Management of PSP X4, in the Color Management of Windows (Win 7), and in the Printer Driver (Epson Stylus NX300), all with no success.
I also have problems when trying to SOFT PROOF these profiles in PSPX4: what I get is an unusable image covered with a deep fog, an image that is far from what is printed. And I know these printer profiles are good because they work correctly in Photoshop Elements 10.
View 3 Replies
View Related
Dec 19, 2012
I am trying to scan images from HP8600 printer/scanner attached via network. I get this error message "Not enough memoy to complete this action. Please close one or more documents or applications and try again. If this does not correct problem, you can try adjusting the memeory setting in Windows or you can work on a smaller version of the document."
I have already:
- rebooted to have a "fresh" copy of Windows 7
- increased the virtual memory from 6GB to 9GB
- decreased the scan to 100dpi (from the standard 200 dpi)
- tried a different HP8600
- had the HP8600 scan and push the image to the computer (works, but just an average image)
- searched the forum
- read the PSPX5 bug thread
View 2 Replies
View Related
Sep 9, 2011
In the X3 version there was a menue setting for the color of the work space where you could change it and not have to use the Graphite color. In the X4 version there is nowhere to select non default color. There should be as not everyone wants to be forced into having it the default"graphite or whatever"color.
View 10 Replies
View Related
Mar 17, 2013
I have changed all the settings on my computer and in PSP X5 to make it the default program that opens any picture/graphic file except files with the psp and pspimage extension because they aren't even an option. When I try to do it, it reverts back to X4. When I try to make the changes within the program itself, those 2 file extensions aren't even in the list!
View 4 Replies
View Related
Dec 6, 2013
I do not have a default email program associated with this progam,and to set one up....how do I set up a default email program for this corel paint shop pro? then it says if i do have an email default to use that as a default...everytime i try to send it, my windows live email comes up, but it wont allow me to send it...jsut says fails and its keeps saying aol failed..., which is not the default....
View 4 Replies
View Related
Dec 10, 2011
Where in this program ( 4x) do i check to not use PSP as my default program? I use another editing program and PSP is opening up my 'bridge' pictures? i need to use the programs as individuals..
View 5 Replies
View Related
Jan 21, 2014
How do you set a paper size in the print module if you do not have a printer installed. I want t use the print module to make custom prints on 8x10 and 11x14 size paper. But I want to print to a JPG to send out to be printed.
View 2 Replies
View Related
Oct 3, 2011
How the tools all have the option to reset to default. I was doing something earlier that required the selection tool and I saw that it had been changed, so I clicked to reset and nothing happened. All my other tools reset just fine.
View 14 Replies
View Related
Aug 21, 2012
I am new to the PrintShop ProX4 family. I just purchased my first PSPX4 software, even though I have been using AfterShot for quite sometime. My question is, how do I prevent PSPX4 from being my default program for viewing images and or pictures attached to my emails.
Prior to purchasing and installing PrintShop ProX4, all my pictures attached to my emails would open up under my Windows photo gallery. But now, they open up under my PrintShop Pro X4 program and since I am still learning the PSPX4, I would like to convert back to the Windows photo gallery.
View 4 Replies
View Related
Aug 1, 2013
I've been using PSP since decades, currently I'm using the latest PSP X5.When I open a .jpg/.jpeg file and without changing anything on picture hit File-->Save or CTRL-S or the Floppy on the Toolbar, any picture is overwritten with a certain compression factor of about 15 (but not exactly). If I go over the File-->Save As..or F12 function, I can choose the compression factor as I want (f.ex. 5) over the options, it will be retained forever, until I change it manually, what is perfectly ok.
I'm quite sure, it wasn't always like this, but since some versions it is. I think earlier the factor I choose on "Save As..." was also used for "Save". But a mystical compression factor is used, which can't be reproduced manually: 15 is a notch bigger but about the closest.
Question:Can I set the default compression factor somewhere, I don't want to make the whole procedure over "Save As..." every time, I just want to open an image, edit and click "Save" with a compression factor of let's say 5. Anything for achieving that is acceptable, like modifiying Registry settings or editing config files to the HEX Level. A lot of googling and searching in settings didn't solve my problem yet.
I use very many features of this great program and plugins and stuff, but it turns out, the only problem I have with it, is about the most basic function.
View 2 Replies
View Related
Dec 7, 2011
how to undo the default tabbed view? I prefer to see all images, especially when using the clone brush.
View 2 Replies
View Related
Apr 14, 2013
I do not use most of the default presets in the crop pallet. I use my own and when I go to the Corel X4 presets dir. Mine are there but the default set are not listed (hidden files?). How can I delete the ones I do not want from the default set so that the ones I have created stay on top?
View 1 Replies
View Related
Apr 25, 2013
(using PSP-X3 ) I cannot find anyway to set the default of FIT TO WINDOW when opening a file.
All files seem to come in very large and I then have to do a "Window > Fit To Window" to get it right.
View 3 Replies
View Related
Oct 15, 2012
I am not liking the new features of X4 text. First, is there anyway to make the default text use the dialog box with holding down the shift key? Second, I am so use to previewing font styles by simply highlighting my text and then scrolling through the fonts drop down menu with version 10. This seems impossible with X4, MAJOR BUMMER and it really slows me down.
View 1 Replies
View Related
Dec 20, 2011
I created a image (with blank background) with dimensions 640 x 480 (its my default working image).
I have copied photograph with dimensions 7300 x 4200 and pasted as new layer on the image (640 x 480). Obviously, the pasted photograph is bigger and it couldn't be showed totally. I am adjusting the size of the photograph manually, dragging and dropping its corner lots of time.
I tried to use "image => resize" / "image => canvas size". But it just act on my default image (640 x 480), not the photograph (even when its layer is selected).
So, is there any way of resize the photograph automatically to fit in the default image (640 x 480)?
View 2 Replies
View Related
Sep 1, 2013
I recently installed Corel Paintshop PhotoPro X3. I find now that when I double-click a gif file (and I think some other types) it is opened with Corel Instant Viewer rather than Microsoft Office 2010. I want Office to be the default viewer, so from Windows Explorer I right-clicked the gif file, selected "Open with..." then "Select default program", then Microsoft Office 2010, and checked "Always use the selected program to open this kind of file", finally "OK". The file then opened with Office. However the next time I double-clicked the same file, it opened once more with Corel Instant Viewer.
The procedure I followed has worked in other cases, so I don't understand why it doesn't work now. Is there any way of preventing Corel Instant Viewer from being the default viewer short of uninstalling it?
View 2 Replies
View Related
Jan 4, 2004
I recently found out that in CS, the 3D Transform filter (Filter -> Render -> 3D Transform) does not install by default. But it IS included. Check the GOODIES folder on the the install disc (extras & resources), you'll find it there. Drag it to your Plug-ins folder.
View 4 Replies
View Related
Jul 13, 2011
I want to delete the default brushes in Gimp, like the famous green pepper and others that I find not useful to me. I know how to do this but is there's a reason why the pre-installed brushes cannot be deleted with the brush editor?
View 3 Replies
View Related
Jul 22, 2013
I'm on a Mac, I have three printers, and I want to use one in particular for a PS printing task. I fill up the printer with the right paper, then call up the file and hit "print", forgetting to notice that the assigned printer is the wrong one. So a wasted proof. So I go to Sys Prefs and set the "default" printer to the one I want, go back to PS, pick the file, hit print, and I still get the wrong printer, so I set the print dialogue box for the right one manually, get the print, call up another file, and hit print again. The Print dialogue box has reset back to the wrong printer. Photoshop seems to have its own "default" printer selection system, independent of the overall system preferences. How the heck do I get PS to recognize and use the "default" printer, rather than settling on its own random choice?
View 1 Replies
View Related
Oct 10, 2012
I've tried setting "Options" > "Plot and Publish" > "Use as default output device" to both "Default Windows System Printer" as well as "HP Officejet.I've double checked that my printer is in fact set as the default windows system printer.Nonetheless, every single time I print, "Printer/plotter" is set to "None" and I have to select my printer manually.
View 5 Replies
View Related
