Photoshop :: Multilayer Pdf's In Photoshop

Nov 7, 2008

I am trying to work out how I can open a multilayer pdf in Photoshop or Illustrator so that it maintains it's layers.

View 4 Replies


ADVERTISEMENT

Photoshop :: 16bits/channel Multilayer Psd File...

Dec 3, 2008

Did someone already know about 16 bits/channel multilayer psd file parsing is different to that of 8 bits/channel multilayer psd file?

as far as I try, it seems 8 bits/channel model, image data is saved in RLE model, but it is quite different in 16 bits/channel,
we could easily find out once we load those two file into memory (with same context, only model changed).

Anyone who know which algorithm may 16 bits/channel multilayer psd taken for saving the layer image data?

View 3 Replies View Related

GIMP :: Photoshop Multilayer Image - CMYK To RGB

Jul 14, 2013

I had a sudden loss of Photoshop and need to work on a large multi-layered psd. (Had I known in advance I would have reduced the size & layer amount.) Gimp won't open it because it's CMYK.

Tried several conversion techniques to RGB, none worked well. How can I open this file and maintain the layers? Also, there seem to be several different kinds of RGB, what are the differences?

View 4 Replies View Related

VideoStudio :: Create Multilayer Music

Oct 3, 2013

I been searching around but other than going to the smart sound website and buying their software I do not know of any other sound software which allows me to create multilayer music for video studio. Additionally it does not appear that their software contains a plugin for Corel videostudio. So what are my options concerning creating custom music for videostudio?

View 2 Replies View Related

GIMP :: Open Multipage TIFF As Multilayer Image

Dec 7, 2012

Gimp open a multipage tiff as a multilayer image and i can edit it. But wheni save it, all layers are merged into one and i've get a onepage tiff. Howcan i save a multipage tiff?

View 6 Replies View Related

Photoshop :: Why Are Pdfs From In Design So Bad?

May 5, 2009

My designer has created some pdf portfolios from In Design (which I don't own and have never used) . They are quite blurry and off color. I have taken the same images and run them in PHotoshop and Bridge 4 and the pdfs produced by PS and Bridge looks 10 times shaper and clearer.

This gets complex becuase they are all formatted quite complexly for In Design, and it will take too much time to re-formatt them for Photoshop or Bridge. But she has no idea why they are not coming out sharp and nice with In Design.

It's not compression.

She has been outputting with no compression from In Design and they still look subpar.

View 7 Replies View Related

Photoshop :: CS6 Save As PDF Creates Bad PDFs

Mar 31, 2013

I'm on a MacPro using the latest version of Lion, 10.8.3.I'm trying to convert my .psd files (CS6 13.0.4 x64) into PDFs with embedded fonts, but if I do a Save As and select Photoshop PDF and then select High Quality Print, the resulting PDF files show text that appears to be partly corrupted, no matter what application I view them in.
 
Examples, first the original PSD file:

And here's how it looks as an exported Photoshop PDF: The text that looks normal (starting with Holmes) can be selected, but the rest does not act normal at all.

View 1 Replies View Related

Photoshop :: CS6 Not Creating Layered PDFs?

Oct 10, 2013

Why can I not create a pdf file from CS6 that preserves my layers, which are also known as OCG's, Optional Content Groups?  In "save as pdf", I have layers checked and I am indicating I want to preserve Photoshop functionality, which causes the PDF/X box to go to "None".  What am I doing wrong?  I know there is a script for saving each layer as a pdf automatically from which I could build the layered Acrobat file I want, but it I'd like a one-step process.  There is every indication that this should happen, but it does not.

View 4 Replies View Related

Photoshop :: Does PS Auto Crop PDFs?

Jan 24, 2007

I've noticed that when I open some PDFs that have crop marks, Photoshop only opens the are within the crop marks - therefore cropping out any bleed on the original PDF.

View 4 Replies View Related

Photoshop :: Making Sharp Pdfs

Apr 22, 2009

I notice that pdfs, the imagery comes out soft. any way within making pdfs that they can be sharp? I don't think a setting like that exist.

View 9 Replies View Related

Photoshop :: How To Stop PS3 From Importing Transparent PDFs

Sep 5, 2013

Usually, whenever I opened a pdf in photoshop, it would come as the "background layer itself" with white coulour behind the text.
 
However, for some reason now whenever I open a pdf in photoshop it keeps comming up just like this:
 
How can I stop photoshop from doing this?
 
There should be a "background layer" showing up by default. Shouldn't it?
 
Instead the pdf is showing up as a single layer of text without a "background layer."
 
Is it possible to configure photoshop to keep this from happening?

View 3 Replies View Related

Photoshop :: How To Create High-quality PDFs

Nov 8, 2013

I use PhotoShop 7.0 and PageMaker 7.0 to do graphics (I'm old). 
 
I need to buy software that will create high-quality pdfs from my PageMaker files.

View 2 Replies View Related

Photoshop :: Action Converting PDFs To TIFFs

Dec 5, 2008

I've got a folder with about 200 pdfs in (all single pages as I've split them as such). What I want to do is set up an action that opens them in photoshop, converts them to a bitmap and saves them as a TIFF. Easy right? Nope.

I've set this up by recording the action. What happens is it opens all the files in turn and changes them to bitmaps as I want, but when it saves them, it saves them all with the same file name, which is the name of the first one (the one I recorded the action with), this means it keeps replacing the first file.

what I want it to do is to save each file with it's own file name!

View 1 Replies View Related

Photoshop :: Unable To Open PDFs - Not A Valid Document

Jan 22, 2013

I am unable to open my own pdfs in my Photoshop (ones that I have created in same Photoshop).I get the message "This is not a valid Portable Document File (PDF) document. It cannot be opened."
 
I have to keep recreating the art...ugh!! Is there a way to pull up history to replicate my artwork until I get this resolved?

View 5 Replies View Related

Photoshop :: CS3 Prints Awful Black And White PDFs

Jan 20, 2009

I have been merrily taking screen shots for a recent work project, pasting them into Photoshop, adding a touch of sharpening via Highpass filter, and printing them to PDF. suddenly, with the most recent print, I am greeted for the first time with the message "Some PostScript specific print settings (Interpolation, Calibration, Encoding) will be ignored since you are printing to a non-PostScript printer." I also noticed all of my other prints to pdf were 72 dpi, suddenly this one is 121 PPI. The PDF is black and white, although the original document is full color, and it has the moire pattern of a scan taken at the wrong resolution, a pattern of little squares all over.

Every PDF I save from Photoshop is like this now, filters or no.

What the heck happened? How can I get my pdfs back?

View 1 Replies View Related

Photoshop :: Adobe Acrobat: Adding Multiple Pdfs As One

May 24, 2005

I have several pdf:s that I'd need to combine as one pdf. Is that possible even? I only have acrobat reader,

View 1 Replies View Related

Photoshop Elements :: PDFs Checkered On Import - Seen As Layer

Feb 18, 2014

having only used Photoshop elements for about 6 months. I have frequently imported PDFs into Elements, where they always showed up as the background. I could see the information clearly, draw on the PDF, and then save it as a jpeg with the modifications that I made (work project).
 
However, today the PDFs are showing up checkered (which I read has something to do with transparency). It also is imported with the title "Layer 1" not a background layer, like before.
 
I edited the transparency preferences to reduce the grid size to "none", but that only created a white block where the PDF should be--the information that was in the PDF didn't show up. It's like the PDFs are not showing up at all when I import them.

View 4 Replies View Related

Photoshop :: Unable To Apply Curves To PDFs Open In CS6 Beta?

May 9, 2012

I'm having trouble with applying curves. I import a PDF and try to apply curves to it. After I open up curves and change the settings, I see the live preview on the PDF, but when I press OK to save changes, it goes back to the original PDF as if none of the changes were saved.
 
I also tried applying curves as a new adjustment layer, and that appears to make the changes stick. But if I resave the PDF or print it out, it still comes out looking like it did before the changes I made.
 
Lastly, I tried adding curves adjustment layers, and then merging all the layers, or flattening the image. In both cases, the PDF went back to what it looked like originally.

View 6 Replies View Related

Photoshop :: Saving CMYK PDFs From CC With JPEG High Compression

Jul 29, 2013

When I save a PDF file in Photoshop CC in CMYK color with JPEG compression (quality = high), it will save without any errors. However, when I open the file in Acrobat, I get an "Out of Memory" pop up error. I press Ok, and the document is just displayed as a blank white image.

I'm using Win7 64-bit, Photoshop CC 64-bit. Plenty of memory (24GB) and allocated RAM in preferences, and I've done some troubleshooting that leads me to believe the error is not due to system memory, but rather a specific bug in the software. I have Photoshop CS6 on the same machine, and if I open the PSD, save as PDF with the above settings, everything is fine when I open it using Acrobat. This seems to just be for Photoshop CC, not CS6.
 
Here is the troubleshooting I've done so far:
PDF format, RGB color, any other settings --> Acrobat can open the file.
PDF format, CMYK, no compression --> Acrobat can open the file.
PDF format, CMYK, JPEG compression [medium] --> Acrobat can open the file.
PDF format, CMYK, JPEG compression [high] --> Acrobat can NOT open the file because it encounters the "out of memory" error.
PDF format, CMYK, JPEG compression [maximum] --> Acrobat can open the file.

View 9 Replies View Related

AutoCad :: Plotting From PDFs

Jun 16, 2008

I figure many of you do as I do, drawing things to plot blueprints. It just so happens that I'm often sent PDFs of drawings to plot, but for some reason I have trouble with them.

Suppose I have a standard drawing that is meant for a 24x36 Arch D sheet size. It will always plot 36" because it has to, that is the paper width of the roll. But for some reason, it will stop shy of 24" and cut the paper as much as 4 or 6 inches short, instead of printing the full 24".

The drawing inside the PDF is exactly right, the Adobe Acrobat Reader shows the drawing fine, it fits within the margins, it's not scaled, the sheet size is shown accurately. Based on the visuals and settings, all things are great. I've got the paper set to 36" roll, opaque bond, no scaling because I need it to print accurately.

However, when it prints, some of the drawing is cut off at the bottom and at the top, and instead of 24" it cuts the paper at 18 or 20". I don't get it. It shows 24" in the print wizard, the correct paper size is shown, the preview images looks great. All things check OK, and then it prints and cuts off the graphic and makes a short sheet.

I'm afraid to try scale to 100% or scale to sheet size, because the people who have to use this need to scale it on paper with a ruler and I can't have it stretching or shrinking the print.

What gives with Acrobat printing? Need to plot PDFs accurately? It would be one thing to simply cut the sheet where the graphic ends, but this is actually stopping shy of printing the graphic altogether and cutting the sheet early before it reaches 24".

View 9 Replies View Related

AutoCad :: Multiple PDFs In One Go?

Oct 24, 2012

I have over 150 ISOs made and ready to be converted into PDF but I don't know a way to do this without opening each one idividually and printing it to my PDF writer. There must be an easier and faster way to do bulk PDFs.

View 3 Replies View Related

Illustrator :: Differences Between AI And PS PDFs?

Apr 21, 2013

I produce documents in AI, and save them to pdf.  Then, in order to reduce the file size, I load then into PS, flatten image, then resave as pdf.  All are in CMYK.

There appears to be a big difference in the output pdfs from AI and PS. In the PS ones, blacks are very grey, and drop shadow effects become exaggerated.  I've attached some screen shots. I hope you can see the differences. The AI ones are on the left.  It is quite hard to see the differences here, but across a whole document it is very obvious.

What can I do to stop the PS pdfs turning out this way?

View 16 Replies View Related

Illustrator :: PDFs Are Too Big To Email?

Jan 10, 2012

I email a lot of pdf's out of Illustrator and have a saved setting. I am basically using the smallest file size setting but with bleed and trim marks. Files normally come out about a MB or smaller. We recently upgraded to CS 5.5 just after All of a sudden for about the last 2 weeks when I save a pdf the files are 10 MB or bigger. I have tried just about everthing to reduce the file size and nothing is working. Why this would have happened and what I can do to fix it. I had to export the files as jpgs in order to make them small enough to email.

View 10 Replies View Related

Xara :: Exporting PDFs With CMYK?

Oct 25, 2013

I'm currently using Xara Photo and Graphic Designer 2013.

I'm unable to convert pdf's using a cmyk model. I don't have that option available to me.

Which version should I upgrade to, in order to have that functionality?

View 5 Replies View Related

Xara :: PDFs Will Not Open Or Import Into DP9

Nov 13, 2013

Certain pdf files will not import even though they look as if they are when I chose to merge. Same thing when I try to open.These very same files can be imported (placed) into Indesign. I have checked layers and there is only one (the visible current one which shows a pdf in the layer properties. It just is not visible though.

View 3 Replies View Related

Xara :: Opening PDFs For Editing

Jul 26, 2013

When you open a PDF you have the choice of opening it for editing. Unfortunately it produces small chunks of text instead of a nice text block. So, you really cannot manipulate it to add text the middle of a paragraph say.

I tried to be clever and selected a bunch of chunks and tried a "combine shapes"" XDP9 did not like that a that at all and went belly up.

View 2 Replies View Related

AutoCAD Inventor :: Possible To Create 3D PDFs

Feb 16, 2012

Is it possible to create a 3D PDF from Inventor 2012? Or is there a third party software that is needed to do this?

View 9 Replies View Related

AutoCad :: Importing PDFs Of Drawings?

Sep 9, 2010

I am wanting to import pdf's of drawings into my AC08. I just want them in there for reference purposes, i draw submittals and have them in pdf format and on paper, just on big jobs nice to be able to just scroll over and reference rooms and such. I dont need them to be to scale or scalable. I copied and pasted some in but they were so small, by the time i zoomed in on them they just look like a bunch of vectors and not very legible.

View 8 Replies View Related

AutoCad :: Converting DWG Files To PDFs?

Sep 7, 2012

I'm used to using AutoCad R14 and just recently had to purchase AutoCad 2010. The printing service that I have to use has to have the drawings in a PDF format and I found out how to make the conversion. However, the lineweights, the linetypes and the linetype scales are all out of wack. I have read about setting up a CBT file, but apparently I'm missing something someplace. I want to plot by color to achieve lineweight. Linetypes and linetype scales are set when the object is drawn, where the default is Continuous and 1 respectively.

View 3 Replies View Related

AutoCAD 2013 :: Get PDFs To Be 22x36?

May 28, 2013

I am trying to get my PDF's to be 22x36.  My only available printer is 11x17 and for some reason Adobe Standard that I have isn't working for me. 

View 4 Replies View Related

Illustrator :: CS6 Does Not Save PDFs To Artboard

Apr 16, 2013

The first time it happened, I uninstalled AI and did a fresh install which fixed it for a short time. When I save a PDF out of AI, it does not save to the artboard constraints. This is a screen shot of my AI document which has 2 pages.

When I save as PDF, this is what the file looks like:

(Pg 1)
 
(Pg 2)
 
After the original file has been saved (incorrectly) I can open it and save it again and it will be fine.

View 12 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved