Photoshop :: Modify Selection Without Moving The Image?
Nov 24, 2011When selecting an area I would like to modify/transform/reshape just that selection (the marching ants) without moving the underlying image.How do I do that?
View 9 Replies
ADVERTISEMENT
GIMP :: Moving Selected Area Versus Moving Selection / Moving Whole Image
Mar 22, 2012I want to select part of an image with just one layer. Say I just flattened the image and have to move one part of. I select it with the rectangular select tool. It seems intuitive that I could then just move what I selected, but when I drag the selection, the selection itself moves without moving what is inside the selection.
If I then remember to click the move tool and try to move what's in the selection (seems to work sometimes, maybe when there's multiple layers?) the entire image moves.
The only way I can move part of the image over is if I make a selection and then cut it (ctrl X) then paste it.
How am I supposed to move part of the flattened image, is there a way I can set it to default to "When I select something, I can immediately drag that selected area around."
GIMP :: Moving A Selection From One Image To Another
Jan 29, 2014I need to assemble multiple images in an illustration program (inkscape or illustrator for example). So I want to cut and paste several regions from different images, but I want them to all be exactly the same size. What I had been doing in photoshop was just dragging the selection from one open image to the other and that would preserve the size so I could copy again, but that doesn't seem to work in GIMP, or rather, nothing I tried seems to work.
How can I get a selection to be identically sized between different images without actually moving any part of the image itself?
Photoshop Elements :: Entering Text Into Image But Letters Are Surrounded By Moving Selection Dashes
Dec 2, 2012When I enter text into an image, the letters are surrounded by the moving selection dashes, the font colour is not there, the image turns a strange red colour and I cannot get rid of the selection dashes.
View 2 Replies View RelatedPhotoshop Elements :: How To Modify A Selection
Mar 6, 2013We need to know how to make a retangle, bend the lines and fill with color (dancing ants). If this product cannot do it whst will? Can I get a reduced price since I purchaed Adobe element 10?
View 5 Replies View RelatedPhotoshop :: Selection Modify Commands Grayed Out?
Apr 6, 2012In PS CS5 Extended latest version. I select all, then go to Select|Modify, and all choices are grayed out other than border. This is an 8 bit RGB image. The layer is selected. I also tried flattening it. I also tried creating a new image, RGB 8 bit depth. Also 16 bit. Nothing works.
I double checked CS3 and this works in CS3, but not CS5.
Photoshop :: Modify Selection That Has Become Part Of Layer Mask?
Jun 11, 2012How can I modify a selection that has become part of a layer mask? I want to refine the edge of a mask. Windows 7, PS CS 5.
View 2 Replies View RelatedPhotoshop :: Feather, Modify, Grow, Transform Selection Disabled
Dec 24, 2005I have a edu version of Adobe creative suite CS2. I tried to learn some text effects in online turtorial but I found that feather, modify, grow, similar, transform selection submenu are disabled in the select main menu. I would like to know why and how to make them enable.
View 2 Replies View RelatedIllustrator :: Can't Modify Selection That Says Mixed Appearance
May 24, 2013In older versions of Illustrator, I used to be able to make a selection of multiple objects and give them a stroke or other attribute. Now it says “Mixed Appearance” and I can't do anything to the selection. How do I modify a multi-selection if it says “Mixed Appearance?”
View 3 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Modify Existing Selection Set?
Sep 5, 2012I need the same funcionality as in code below, but without using "command".
The main idea is alowed user to modify Existing Selection Set.
(defun gt:ss->lst (a:ss / i lst ) ;_ / (setq i 0) (if a:ss (progn (repeat (sslength a:ss) (setq lst (cons (ssname a:ss i) lst) i (1+ i) ) ;_ setq ) ;_ repeat (reverse lst) ) ;_ progn ) ;_ if) ;_ defun gt:ss->lst(defun gt:ss_modify (a:en-lst / ) ;_ / ;;create Selection set (setq ss2 (ssadd)) (foreach f:en a:en-lst (ssadd f:en ss2) ) ;_ foreach ;;Run command and fill with initial content (command "_select" ss2) ;;Alow the user to modify the contents (while (/= (getvar "cmdnames") "") (command pause) ) ;_ while ;;get back the list of enames from modified selection set (setq ss3 (ssget "_P")) (setq ss3-lst (gt:ss->lst ss3))) ;_ defun gt:ss_modify(defun tst:gt:ss_modify ( / ) ;_ / (gt:ss_modify (gt:ss->lst (ssget)))) ;_ defum tst:gt:ss_modify
Photoshop :: Moving A Selection
Dec 17, 2005I am retouching a photo... i'm have selected one person in a group and wanted to move her closer to the group, but when I do that, there is a hole you can see through left behind. That obviously isn't going to work. I think I remember trying to do this and there isn't a hole left behind.
How can a move a selection and just have the background left behind... I wouldn't even mind moving her closer and having a double image... I could clone out the image I didn't want.
Photoshop :: Moving A Selection
Sep 27, 2006I have a picture of a horse on a white background in psd format which I want to drag into another psd image.
When I make the selection of the horse, then drag it into the other image it comes in o/k but still has a faint white replica of its original background.
Photoshop :: Moving Just A Selection
Dec 19, 2006I've used the Pen tool and got it down pretty quickly, and made a selection (of Roger Federer). I cut it out and saved it on its own layer. Then I did the same for the chair he was in. I just tossed the leftover background. Then I cut and paste (not very accurately) a Christmas tree into a new background layer. Then of course, I inserted myself into the scene (even using the previously made path/selection) and here's where the trouble is...
I needed to adjust the position of "me" to fit the scene scale -position & size wise- with Roger and the chair.
How do I move, transform, and tweak my selections? I don't want the other layers to move too. I just want to move what I select and then change it's size.
AutoCAD Visual LISP / AutoLISP :: Modify Objects Copied From A Selection Set?
Nov 17, 2011I am creating a selection set using ssget...
Then I copy that selection set multiple times in a loop. What I would like to do is then rotate (or otherwise modify) the last copied group of items. If I rotate "last" it will only accept the last drawn item, so only one item in the group of copied objects will rotate.
Here is the portion of simple code I am using right now (it's in a loop so all variables with 'Next' are changing each time):
(command "_.copy" SS1 "" SS1Base NextPT)
(command "_.Rotate" "l" "" NextPT NextAng)
This works fine with a single object, but I can't figure out how to call up the entire group of objects.
Civil 3D 2011
Windows 7 x64
Photoshop :: Copying Selection WITHOUT Moving?
Dec 15, 2012trying to copy a selection and paste it into another layer, but no matter what i do it slightly shifts. I need it to be in exactly the same place as the original, only on another layer.
View 3 Replies View RelatedPhotoshop :: How To Get Rid Of Trackers In CS6 When Moving Or Rotating Selection
Sep 5, 2012How do I get rid of the trackers in Photoshop CS6 when im moving or rotating a selection?
View 4 Replies View RelatedPhotoshop :: Moving A Selection Of A Type Layer
Apr 1, 2005I've got a type layer, and I want to move a certain selection of type, but it seems to only want to move the entire layer. Here's what I've got:
I want to move the "Web Developer" type so that it's centered under "Gibran Shah". I'm using the Rectangular Marquee Tool to form a rectangle around "Web Developer" and then the Move Tool to move it. When I move it, it moves the entire type layer. How do I get it to move only the selected region.
Photoshop :: Moving A Selection A Specific Point
Apr 27, 2009I need to move areas of an image that I have selected using the unit of points.For example, I get corrections in our copy where I need to move certain parts of the image 8 points up or over 3 points.
I can use the measurement tool to meausure the distance but then it disappears when I try to actually move the selection. The same thing happens when I try to use guides to mark the area. I wish I could just set Photoshop to "nudge" in points instead of pixels.Is there any way to make this easier?(Photoshop CS4 version 11)
Photoshop :: Modify Image With Pen Tool
Aug 21, 2007How do I modify a regular rectangular marquee square image with the pen tool?
I can't seem to get the 4 green dots.
GIMP :: Moving Selection Contents
Dec 27, 2013I am using GIMP 2.8 on a MacBookPro with OSX 10.8.
I want to cut and move a selection (and, if at all possible, preserve and then enlarge the selection rectangle to perform a subsequent cut and move operation.)
I've got a graphic, let's say it's a 10x10 pixel square in black. What I want to do is to add a vertical column of white pixels in between every existing column of the image.
What I thought to do is the following: first, enlarge the canvas to twice the width of the image, so 20Wx10T (original image on left, blank extension on right). Now select the rightmost column of pixels and move the contents of the selection one pixel to the right. Extend the left edge of the selection rectangle 2 pixels to the left, to include the newly "blank" column and the next column of the image. Move new selection and contents one pixel to the right, and so on, until the expanded canvas is filled and there are 'blank' columns between every column of pixels in the original image.
However, I am unable to find a way to move the selection and its contents. I've tried every combination of secret handshake I can think of, but none work. I'm able to move the selection and essentially duplicate it in another location, but not by cutting it and moving it somewhere else, leaving the initially selected area blank.
Paint.NET :: Moving Selection Tools
May 8, 20121) I open up a large image as background.
2) I add a new layer, then import a smaller image into that layer.
3) I try to select and move the smaller image so that it's positioned where I want it, but despite seeing the "nodes" on the side and corners and trying every possible combination of blue arrow/white arrow/shift etc., all I seem to be able to move across the canvas is the transparent box created by the nodes. In other words, I'm moving the box that contains the image, but apparently not the image itself.
Might this have anything to do with one image being a .pdn and the other being a .png?
GIMP :: Moving A Selection With Lots Of Layers
Dec 10, 2013I just started using GIMP the other day, and it's great; I've already gotten the hang of layers and moving stuff around! But sometimes, after I put together a part of an image using multiple layers, I'd like to move that part somewhere else to give me more room or to put it next to something else. Is there a way to do this without going through each of the layers, selecting the part, and moving the part to its destination layer by layer?
View 3 Replies View RelatedLightroom :: Moving Selection Of Images Within A Folder?
Oct 24, 2012I would like to move a selection of images within the same folder. I have done this before with a drag and drop but it doesn't want to work today. I have and keywords for filters but wanted to set up in time/day order using 2 different cameras.
View 1 Replies View RelatedAutoCad :: Lose Selection When Moving Locked Viewport
Oct 9, 2013I'm working in a locked viewport. Every time I move the view with the middle mouse, I lose the selection. Is there a way to change this?
View 5 Replies View RelatedPhotoshop :: Modify Image To Make It Suitable For Background On Website
Mar 2, 2013If you could modify attached background image so it would be more suitable for a repeating background image for a website? I have been already trying to do that by myself for hours (duplicating layers, flipping them horizontally/vertically, offset...), but how to realize that well. The main problem is that gradients and textures on borders are way to rough and it is really noticeable when so small background gets repeated for many times. On top of that, corners have dark shadows which make everything even more noticeable. Please note that attached image should be resized for about 3 times, I'm just posting original image which I have to work with.
View 9 Replies View RelatedPaint.NET :: Change Default Background Applied When Moving Or Deleting Selection
Feb 10, 2013How do I change the default background that is applied when moving or deleting a selection ?
I want to preserve the existing background color, I don't want it to become transparent.
Paint.NET :: Modify To Solid Color In Image
Feb 12, 2013Is there any way to edit colors in Paint.net so that I would have only solid colors in the image? I would like to get rid of sort of "semi colors/pixels" (see border between red and green color). I would like to have all the borders between colors like the border between blue and grey color where there is only solid colors present.
View 3 Replies View RelatedGIMP :: Modify Underlying Layers For Image?
Dec 30, 2013How & where to modify my ''Underlying layers'' for an image I am working on.
The overall project/design is for a t-shirt mock-up template. The whole idea is to make it as realistic looking as possible (photorealistic)
I found a great tutorial (which unfortunately was made for photoshop...) I was to follow it and pretty much apply the instruction to Gimp. However, there is part where the ''Underlying layers'' are being tweeked.
I am able to follow everything up to (4:32) [URL] ...........
Photoshop :: Copy One Image And Paste It Into Selection (masked) Of Another Image
Sep 4, 2013I want to copy one image and paste it into a selection (masked) of another image. I have the option to paste into which works but would like to be able to paste in Place as I believe this makes it a smart object and references the original file.
View 5 Replies View RelatedAutoCAD Inventor :: Can't Modify Image Of Icons In Parts And Assemblies
Sep 13, 2013I'm using inventor 20013 in my computer. I can't modify the image of icons in parts and assemblies?
I know to change the icon who appears up of tool bar in part and assembly screen , but i don't know change the general icon.
Photoshop :: Moving The Image...
Dec 17, 2005When making a selection, I like to use the magnetic lasso tool. I usually zoom in on the image. I just hate it when you get to the edge of the image and you have to "manually" push the lasso tool against the edge of the image to give you get access to the rest of the image to select it. I always mess up and selection is ruined by the quick movement when more is opened....
is there any way to scroll the image up or down when you get to the edge of it and you still have to select outside of the window...
Maybe there's a key stroke that will allow me to scroll up or down or right or left without losing the amount that I've already selected.