I'm going to have a solid surface which I want to make it look like it has a holes in it. Sooner or later I will probably switch the perspective on the surface, add the holes, and have tentacles coming out of it. So basicly I want to know how to add some sort of holes to a surface. the holes that are in the turtles back are what I want. Kind of with the beveled edge and everything.
View 3 RepliesI am trying to Drill a series of holes on a cylinder. I cannot find out how to start the sketch on this surface so that i can drill on the rounded part of the cylinder.
View 5 Replies View Relatedi need to make a 'stencil' of sorts that is a solid 1.5mm thick disk (about 30mm in diameter) with 200um holes (separated by 500um - i.e. 500um distance between each hole)
Things I've tried:I tried to make a 2D footprint of this stencil and then extrude the entire thing. My computer crashed! i guess the ram needed for this is too much.
I made a 200um diameter circle, extruded it into a 1.5mm 'pillar', arrayed these pillars, then placed a 30mm diameter, 1.5mm high solid disk around the array and made a block. When i exported it to an stl format, it didn't recognize the design as a disk with holes, but as an array of pillars.
I tried to make the disk first. draw one 200um circle and presspull it to form one hole - but i can't seem to array that hole in this disk!! If I have to make an array of these circles and presspull them one at a time, i'll die before i finish the stencil.
I have scoured the pages on here looking for a way to put a 90deg curve in a piece of bar (2x40x2356mm) .
The next issue I am having is after I have curved it I need to put equidistant 4mm holes central along its length (20mm in and 40.6mm between them).
I would like to know whether it is possible (and how) to trim a wall that was generated from mass face to a roof (also generated from face mass) or/and make a horizontal hole in it. The wall itself is not straight or curved, it shifts outwards from the building from base to top (still in an elevation it looks like rectangle).
View 2 Replies View Relatedhow the bullet holes were done?
View 9 Replies View Relatedhow to make bullet holes?
View 6 Replies View RelatedBeen seeing this alot and I was wondering if any1 knew how it was done. I wouldnt even know where to start with this.
View 6 Replies View RelatedI'm missing a very important feature since I switched from CS4 to CS 5.5: In Photoshop CS4, when you created a path in another and selected the path, the inner path was left blank (Creating an "o" and selecting it got you the selection in shape of an o).
Now, as I'm using CS5.5, Photoshop totally ignores those inner paths and makes one big selection (example: [URL] ....]. I have to put big industrial machines on transparent background, and now I have to create dozens of paths for every little hole and then must put them together manually, which takes a lot of time.
Here's a strange situation. 3 of my students have had the Pucker and Bloat tools in Liquify tear holes in their images. I mean really pucker so hard that transparent pixels appear at the liquify point. Their tools were set on the defaults -- not overly strong strength or rate.
What gives? All 3 of the culprits were on Windows machines... (Mid 2011 imacs with Windows OS). The students on Mac had no problem.
Oh, also one of the students with the problem was having it so strongly that the Liquify tools were actually creating tiny copies of the whole image *inside* the torn "holes"-- as if the image is being turned inside out!
Edited to add: I've noticed another couple of weird things with those machines having this problem:The Reconstruct tool and Reconstruct button also cause the holes to be torn... but with those tools, the holes are repeated like the run in a nylon.
I'm using photoshop CS3. When I use the healing brush like, it makes holes in the image that I'm using it on sort of like it's erasing that spot that I'm using it on instead of fixing that spot. How can I fix my healing brush so it works like it's supposed to - as described in my "Classroom in a book" for Photoshop CS3?
View 4 Replies View Related-Did I do the rectangular pattern correctly? If not, the correct one with step-by-step information
-Why the holes do not go through the thickness of plate?
I am trying to use the WIPEOUT command to make one object that is in front of another one obscure the one behind it. I have my polyline drawn around the object in question, but I need for things to show through the object where there are holes in the object.
In my specific example, I have a tree. I need three trees in front of one another and some against a wall. I would like for the wall to show through between the branches of the tree. I would like pieces of the trees in the background to show through between the branches of the tree in the foreground. So there are multiple holes in the foreground tree because the leaves and branches are not one solid object. Is this possible?
A more simple example would be if there was an object with only one hole in it...such as a door with a window through it...could the wipeout apply to the door - but still show through the wall or scenery behind that door only where the window is.
I need to create a block (10 (x) x 10 (y) x 20 (z) ) start from (0,0,0), and then create a hole (3 units depth, radius = 0.2) at (x=2.1,y=3.3,z =20) go into the block. After that create another hole (2 units depth, radius = 0.1) at (x=10,y=6.4,z=5.5) also go into the block. I can create the block, I also use dynamic UCS to put the coordinate on the face of the block.
However, I don't know how to accurately put the base point of the "circle" on the face of the block. I can only do "Click on the face" to start the base point. This is no accurate at all. I also try to put 3D location instead. In this case, the base point is fine, but the radial direction of the circle always has error.
I'm looking to find how many holes there are in a part ( and then what their diameters are). I tried using
Dim oPartDoc As Document
Set oPartDoc = ThisApplication.ActiveDocument
Dim oCompDef As PartComponentDefinition
Set oCompDef = oPartDoc.ComponentDefinition
MsgBox "there are " & oCompDef.Features.HoleFeatures.Count & " holes"
but this falls down if a hole feature created more than one hole at the same time.
I have an existing extrustion with holes in it. All in one sketch.
I go to add an off shoot from the existing main body in the sketcher. In that off shoot I add a circle
in the middle of the off shoot to represent a hole. So fa so good, or at least I thought. I exit the sketch mode
and my extrustion looks fine with the exception of the hole is not there. Why? Why doesn't Inventor recognise the
circle sketch as hole geometry like it does in the originally created sketch?
In Solidworks, given this same scenario, would have recogized the circle as a void and thus created a hole.
I ended up deleteing the hole out of the main sketch and doing a seperate hole cut feature. I am sure I am missing something and in the process of learning would like to know if indead I did not do this the correct way.
Max 2011, Mental Ray and mR Sun.
One of the objects in my scene is not rendering correctly. It is a side panel grating with holes in it. In the viewport it looks fine, but once I render it only some of the holes display. I created the front grating with the same method and it renders every hole just fine.
You can control the orientation of holes on a PCD while working in Isometric, but it's an intricate and tedious piece of projection.
View 9 Replies View RelatedI am trying to make transparent holes in layers so I can design cornhole boards to overlay in Google Sketch. When I cut out the selected area, I get a background color but I can't make it transparent. Obliviously, I don't have my layers setup correctly. I've spent days watching youtube tutorials but still can't make it work
View 2 Replies View RelatedI can make the button profile and spin it around its axis just fine..getting the holes into such a shape is another matter..Is this beyond AI's 3D tool capability?
And to be clear, I mean the clothing type of button, with holes for thread, as opposed to an interactive button pushed by a user on a web page.
Recently I have download Corel X6. It is a beautiful software, but when I combined some objects the holes fill-up. I read about this in forum and found a hint that reverse node. It is a good solution but this solution works on when you are using a few objects. What if I have a full page of objects and want to combine them. It is very difficult to select each object's node and apply reverse node command.
In Corel 12 it was works fine i.e. combining objects. But in Corel X5 and X6 it is work like a ghost.
I am modelling plain Bearing but i have problem getting holes at an angles. I have attached an image for it.
Holes are located on top side of the bearing.
Basically I’m trying to create a circular cut in a flat pattern for a hole made in a rolled piece of sheet metal.
I have created a "case" (this is what we call it) to mount an axial fan, it will require holes for mounting the motor plate. When I create these holes in the rolled case assembly they appear to be fine, but when I flatten it they are turned into two sets of semi-circles or ellipses.
This is only a problem when we run the parts on our Laser; the laser will attempt to start the cutting at the end of each of these "semi-circles" causing a hotspot where the two semi circles meet. This causes the hole to be slightly smaller than intended in this area causing great difficulty inserting bolts, they normally require drilling.
Our material thicknesses vary from about 3mm to 8mm.
I’ve included a crude example of what I’m trying to achieve. To really see what I mean, place the file into a Drawing file and zoom into the hole. I couldn't add the file, with only 3 features the file was 5mb in size.
By the way, I have a temporary solution, it's just a little complicated. (My solution: use square holes first in the un-flat, use the diagonal lines from each corner of the square in a sketch on the flat pattern to place a circular cut on its mid points.)
Intel Xeon 3.0GHz (4 Cores)
nVidia Quadro 2000 (1GB) - Dual Screen
8GB RAM
How I can get the holes filled/hatched in elveation vies and in sections?
Please see the attaced sketch.
Using the Hole command, I want to locate / reference off datums, this is something I can do in Pro-E. It's not a choice, that I can find.
View 8 Replies View RelatedHow do I place a hole on a circular part at a specified distance from the edge. This works on other parts with straight edges, but there is no option to do so on a circle.??
View 3 Replies View RelatedI have a couple of quick questions about dimensioning holes in drawings .
First, if I have a hole in a rod or shaft so the surface isn't a full circle I get the dimension as a radius. Can I change it to a diameter?
Second, in a model, how do I dimension or measure to the edge of a round rather than to it's center? In SW I could hold the shift key while selecting, is there a similar method here?
I have an assembly which consists of parts and holes, when I open a part the holes are not visible as they were created in the assembly - how do I display the holes for these parts that were created in the main assembly when opening a part file ?
View 9 Replies View RelatedI have a cabinet that we make, and we put some holes through the sheet metal skin of the cabinet at the assembly level. I use iLogic to turn these holes on and off, depending on configurations.
Sometimes when switching between configurations the holes that were suppressed will disappear from my model and leave me with just the original sketch. So my iLogic rule errors because it can't find the hole feature.
I am using planes based off of the origin planes to define an axis that I use as my hole center line. And I then make a sketch on the XY origin plane to create a point for my hole. So everything there is independent of the cabinet model.
I have a 3 part assembly . Holes have to be made though the 3 parts . The holes can be made and snet/projected/though all/though distance and this work fine. The holes are shown in each part and the participant command works fine
The holes are shown in a drawing file....all GOOD
BUT
The holes are NOT shown when each part is opened!
I imported an .obj into Max and the model has a very high poly count. So I remove edges to lower the poly count (select edge, loop, ctrl+backspace) however after awhile, when I render it, I get black holes and missing polys and it also shows in the view ports as well.
I will post an image. I have tried reset Xform and it did not work.
Here are the images
Images 1 and 2: front and left shots of the model before edits.
Image 3: deleted some edges
Image 4: rendering results.
Rig: Intel Core Quad CPU Q6600 @ 2.40GHZ
8gb RAM
64bit OS
GeForce 660i GTX
3DS Max 2013