CorelDRAW X6 :: Combining Objects - Holes Fillup
Apr 18, 2012
Recently I have download Corel X6. It is a beautiful software, but when I combined some objects the holes fill-up. I read about this in forum and found a hint that reverse node. It is a good solution but this solution works on when you are using a few objects. What if I have a full page of objects and want to combine them. It is very difficult to select each object's node and apply reverse node command.
In Corel 12 it was works fine i.e. combining objects. But in Corel X5 and X6 it is work like a ghost.
View 1 Replies
ADVERTISEMENT
Feb 7, 2012
I'm having a few problems combining several objects.I did a drawing with a digital pen, quite a complex one. Every time the pen leaves the page/tablet and then resumes drawing a new object is created. I would like to combine all the objects as one single entity so that when you click on it you can see all the nodes in the entire drawing. You see, I wish to simplify the drawing (there are A LOT of nodes) and each time I try to do this I can only select certain clusters of nodes (ie certain objects, there are over a 1000 of these node clusters). Please refer to the attached picture to get a better idea - this is just a simple drawing of a house I did in inkscape (don't have coreldraw on this computer). I know how to do this in inkscape (at least I think I do). I thought the way to do this in coreldraw would be to click Arrange > then Combine. However, when I select all objects I can't utilise the Combine feature (it's there, though i can't click on it).
View 3 Replies
View Related
Apr 11, 2012
I have need to combine 2 objects into 1 bitmap. Top image is a black (K 100) box with 50 tranpareny, bottom image is just a rectangle with red fill C 0 M 100 Y 100 0. When I combine into 1 bitmap coreldrawx5 is dropping out colour. Maybe using 'normal' rather than 'multiply'. When viewing with proof colours turned on it looks like B) even before combining. Looks like there must be a setting somewhere where Corel that controls how it combines colour of objects as it converts to bitmaps but for the life of me i cant find it.
A) Should be like this with combined B) Converts to this with combined colour
colour of C0 M100 Y100 K50 of C0 M50 Y50 K50.
View 3 Replies
View Related
Sep 17, 2013
I've been exploring migrating my Design and PrePress departments away from Illustrator & Flexi and transitioning to Corel. Unfortunately I've hit a major stumbling block
Right now I have a team of designers laying out sign designs. They draw each sign and we generate a message schedule for those signs in excel. From there, we've been able to use the print merge function in Corel to transfer all the messages from the data sheet to the signs. The problem is, each sign is placed on a separate page within the Corel file. I know you can then use print imposition to gang those signs for printing...but the problem is we have a laser engraver, rotary engravers and routers that are all being run. I've fairly certain we could "print" to the laser without any issues but I'm not as confident regarding the other machines.
Typically once we have the drawings of every sign created (currently doing this in Flexi), we have programmers that gang all similar components together on files that are used to power the rotary engravers. Because the print merge function in Corel puts each sign on a separate page, I'm not sure how we'd be able to transition without having to copy, paste and place each sign back on to a single page. Our jobs often run into the hundreds of signs so the extra labor required would kill any savings such a transition might bring us.
Is there a way to combine pages post print-merge, to get all the objects on a single page? I had really hoped to be able to gang all objects together on a single page within a single file.
View 3 Replies
View Related
Jul 29, 2013
I'm in Photoshop CS6 trying to merge three 3D objects- 2 faces of a coin and a backing to go between them- into a whole for an Aftereffects project.
View 1 Replies
View Related
May 7, 2011
I was thinking about combining a swimming pool water object with an environment like the attached file.
View 2 Replies
View Related
Nov 19, 2002
I'm going through some tutorials and I'm trying to make an object using some shapes. I'm putting them all in the same layer. I have my object, but now I want to add some layer styles (beveled edges). When I go to apply them, I only do it to one of the 3 shapes that make up my object. How do I combined all the shapes to make an object, so that I can then apply the effect? I'm on PS7.
View 5 Replies
View Related
Oct 13, 2011
How do I combine objects that aren't touching or overlapping? Pathfinder just turns them into a group, but I need them as a single object.
View 3 Replies
View Related
Nov 9, 2011
I'm trying to make lego arms currently. I'm using two capsules to make the arms. But you can obviously see two capsules were put together. Is there a way to mush the two objects together to make it look like one? I tried connect and Turbosmooth but it's still noticeable.
3DS Max 2012
Windows 7 - 64 bit
AMD Radeon HD 6570M
Intel Core i7-2630QM CPU 2.00GHz, 6Gb Ram
View 1 Replies
View Related
Mar 1, 2013
I have grading objects that are to match existing grade. However, When I grade to match surface, I get missing countour data.....
View 1 Replies
View Related
Nov 18, 2013
I have a 9 layer Illustrator file that uses multiple transparency effects. I need to combine all the elements so that I can use the pieces with a transparent background, but no matter what I do, it requires a white background to look right. File is here:
[URL]
View 2 Replies
View Related
Mar 1, 2013
If you have several objects grouped, and then you combine them all on a single object, the resulting object is placed inside the same group. This seems bogus, since is not possible to create a group of a single object.
Test case:Create 4 rectangles.Select them all and group them (ctrl+g)Select the group and combine all objects (ctrl+alt+dnarrow)
What I expect:A single object floating on the canvas
What I get:The same group but with a single object inside.
PhotoPaint 16.2.0.998Windows 7 64bits Service Pack 1
View 8 Replies
View Related
Nov 2, 2011
I am trying to combine a snowflake with all it's cutouts and a name for my children. I want the name to remain and be rastered on the laser and the cutout lines for the snowflake to merge around the name and year.
View 9 Replies
View Related
Apr 20, 2013
xpgd1.png
In Xara Photo & Graphic Designer, a program that I otherwise don't need, you can combine line qualities, like thin-to-thick, with brushstrokes (see attached sample). Is this possible in CorelDRAW? I've been trying to find a way, with no success.
View 3 Replies
View Related
Aug 18, 2011
I often produce graphics in CorelDRAW, export it as en eps file and insert it inside a MS Word document as an image and finally convert it to pdf. This way my vector graphics (often linedrawings with or without fill) usually is preserved in the final pdf document. I can zoom in and the lines keep on displaying perfectly sharp. This is important, since it easily looks bad when thin lines are turned into bitmaps, even when watched from a distance.
Now, in some graphics I created today, I had a circle with fountain fill and outline (symbolizing a sphere) put behind a filled rectangle, which had a uniform transparency applied to it. In the resulting pdf file, the 'sphere' was turned into bitmap. Inside CorelDRAW everything was vector graphics, but something was loast in the process. what happens with the graphics in the different steps in the process and eventually could explain a workaround to make everything look as vector in the final pdf file.
View 14 Replies
View Related
Sep 4, 2013
We have created a simple label and grouped several components in CorelDraw X5. Now we cannot ungroup the components. When we right-click the group, the options to group or ungroup are dimmed. The result is the same when right-clicking on the group in the object manager docker.
Perhaps related, is the fact we cannot select the components of the group from the object manager docker. We can select the group, but none of the individual components in the group. None of the layers is 'Locked' in the object manager docker so we should be able to edit them.
What might be preventing us from accessing the ungroup option for a group?
View 3 Replies
View Related
Jan 8, 2012
Having an issue with my objects not letting me drag them. I can move them with the arrow keys, by the coordinates, and can even move the nodes but i can't just grab and drag them with the mouse.
View 1 Replies
View Related
May 24, 2013
Normal
0
false
false
false
EN-US
X-NONE
X-NONE
MicrosoftInternetExplorer4
I created a design in Corel X6. My design was then sent to a vinyl cutter and heat pressed on to t-shirts. My problem is this: where the vinyl overlaps I get an impression mark on the vinyl at the top. How can I delete the portion of the design in Corel that will beoverlapping to eliminate the impression marks?
View 6 Replies
View Related
Nov 16, 2013
I glad to know can i run object with text in coreldraw. I'm working on a book the when i format the some paragraphs the fractions and decorative things back and fro from its original position. So it's a pretty hard to arrange manage on its original position. I try by grouping them with text boxes. The real problems is about fractions and square roots which is drawn by nodes. Can i add equation from math type in text box.
View 2 Replies
View Related
Aug 19, 2011
When I print from Corel Draw X3 some of the objects do not print. They are in the art and show up fine on the print preview but then when I print, those objects are missing. It's almost always with customer art that I've imported. I can't recall it ever happening with art that was designed in X3.
It's the strangest thing. If I change the color of the object that won't print it will then show up in the print preview for the corresponding color. But it still won't print. I usually end up having to recreate that object and then it prints fine. I don't understand why it wouldn't print if I'm able to view the object and change it's color.
I'm using Accu-Rip software, an Epson 1400 printer, and Windows XP. We print separations for screen printing.
View 5 Replies
View Related
Aug 19, 2011
When working on a custom page size, the bitmaps and vector objects disappears, well, i can still select them, but i cant see them, i import the images using the import function, all fine, till i try to move them or resize them, then they vanish.
View 4 Replies
View Related
Jun 10, 2011
Is there an easy way to fix visible gap between objects?
I draw an example to demonstrate the problem. I created this box using snap to objects, after removing the outline it leaves a visible gap between objects. Even if i draw without an outline, the gap still show.
View 14 Replies
View Related
Apr 26, 2011
how to trim 2 objects. First one is a single line scribble on the background. Second object is a face silhouette. I select both object and try to trim the scribble line running thru the head, using "arrange/shaping" but can't select the function trim. The only one available is simplify, all others including trim are inactive.
View 14 Replies
View Related
May 2, 2012
If there is a similar function to "Execute function and repeat" in order to make the displacement of various objects. For example I have 5 different objects and wanted to give them a displacement of 1.5 cm, how to do this automatically by Corel Draw ?
View 6 Replies
View Related
Dec 20, 2012
I have several documents that I regularly access and each has a logo that is normally visible and prints without issue. The object comprises some text and a drawing object.
Earlier this week I added a new second monitor to my machine and since then opening documents in CorelDraw results in a beige, rather than white, workspace. If I change the colour profile from the default "sRGB IEC6 1966-2.1" to the "Samsung - Natural Color Pro 1.0 ICM" profile the white workspace returns, but part of my logo is still not visible.
If it was only one document I might have thought I'd accidently deleted and saved it, but I have at least a dozen or more documents and each document has the logo repeated several time and in all cases only the drawing object is visible, the rest of the logo has vanished, even when printed. I can see the full logo in a document preview prior to opening it.
I have tried unplugging the new monitor, but haven't yet tried a reboot with it disconnected. The monitor that was replaced was an Iyama AS4314UT and it has been replaced with a Dell E1911 Digital. both are my secondary displays, the primary is a Samsung Synchmaster 943 which I have been using for a few years.
View 1 Replies
View Related
Aug 23, 2013
I want to count objects in a photo, by marking them (with a dot or something similar) so I know what I've already counted, and then be easily able to tell how many objects there are in the photo. Is there a way to do this in Corel Draw? I'll be counting hundreds of images so it needs to be a fairly quick method of marking each one.
View 3 Replies
View Related
Jun 1, 2011
Is it possible to export a Draw file with vectors and some perhaps some bitmaps into a layered Photo-Paint file?
The web coders nowadays only seem to be able to work with layered PSDs and I'm doing my designs in Draw.
View 5 Replies
View Related
Aug 28, 2011
this is probably an easy one but is there a way to cycle through overlapping objects?
to give an example I have three images overlaid that perfectly match up I want edit the objects underneath without having to move the top layer, what is the best way to do this?
View 3 Replies
View Related
Mar 5, 2012
How can I revert all symbols to object in document?
View 15 Replies
View Related
Mar 14, 2011
I'm designing a catalog with some prices, every product have a code. Working with layers, I can group 3 objects: A produtc photo, the price and the code. So I rename the group to the code of especified product.
As we see, I can identify the groups, and by code I know what the product I'm working on. I think it's a very organized way to work.
Here the question:
Can I load the prices values from a txt file? I'm using X5.
View 4 Replies
View Related
May 16, 2012
My wife is designing some tote bags that she will have screen printed. I use CorelDRAW at work for manual publishing, and she is having me draw out her designs. I was wondering if there is a way to cut out the white objects from the black object behind in the graphic below. It would save having to add a white color, instead just showing the natural color of the bag.
On another note, I'm getting tired of having to do this for her, but she says the screen printers only take .cdr or .ai files. She's been using iDraw on my iPad to come up with her designs, then I replicate them in Corel. She has a Mac laptop, and I'm wondering if there are any reasonably priced programs that would export to .ai or .cdr so I don't have to do this anymore.
View 3 Replies
View Related
