Photoshop :: Labeling Images?
May 26, 2004Is there an option to lable a batch images
I need to place them on my site but I want to have a site name on them (not renaming ,actualy inprinting the site name on them)
ADVERTISEMENT
Photoshop :: Labeling All Images In A Stack When All Images Stacked?
Apr 1, 2013A long time ago, when I was using Photoshop Elelments I found a plug-in that made it possible to work with stacks as a unit.
If I labeled the top image in the stack that lable was applied to all the images in the stack; then I could sort the the image on top and all the images in the stack would stay together, or if I deleted an image in the stack all the images in the stack were deleted. Without it I have open each stack I lable and apply the lable, so when I sort the stacked images they stay together.
Photoshop :: Mass Pic Labeling
Jul 8, 2006i'm trying to figure out the way to be able to make a label and put it in the corner of all my pics without having to do each one. I have thousands of pics to be labeled and doing each one would take a ton of time.
View 2 Replies View RelatedPhotoshop :: Labeling A Bottle?
Jan 13, 2004I have made an ettiquette for a bottle. (just a square with some design on it)
What I want to do is to merge my design on a photo of a bottle ( Picture of the bottle is taken from the side).
Now the problem is that the natural perspective of a normal bottle is that it bulges a bit to the bottom and to the top (because of the circular forms)
So how can I bulge my label slightly to match perspective of the bottle? (not sideways, but the top/bottom of the label)
I have tried everything (i think) with the transformation tools in photoshop, but none of them can disort a picture from the center top and center bottom. Only from the sides and the corners..
I spoke to a photoshop guru about my problem but he could not get around the problem either. He advised me to take the whole project in to a 3d application, but I feel that if there was an easy way to do this in photoshop it would save me lots of time.
VideoStudio :: Labeling DVD Titles
Jun 3, 2013A small problem, but one I thought it can't hurt to ask about. At least on my DVD/Blu Ray player, when a DVD is stopped while playing, the tv monitor's screen reverts to a home page that lists the name(s) of the movies on the inserted DVD. So if the DVD is Star Wars, the screen will display something like "Star Wars: the Movie" and "Star Wars: Additional Content," which represents the two titles the player recognizes from the inserted disk. (Note that this is not the DVD menu, but something the player is reading from the disk prior to launching DVD.) When the inserted DVD has been created by Video Studio Pro X6 and is then stopped, if there are, say, two film clips on the DVD, the screen displays Just the words "Title 1" and "Title 2".
My first question, then, is whether VS Pro X6 allows me to give the clips actual titles, say "The Zoo," and "The Park," so that these titles, rather than the generic "Title 1" and "Title 2" will display when the DVD is stopped.
My second question is whether VS Pro X6 allows me to issue instructions so that when "The Zoo" or "The Park" (or for that matter "Title One" or "Title 2") is selected from the player, that the DVD's menu will come up rather than the selected clip. (This question is even less important than the first, but while I'm on the topic, thought I'd ask; I have adjusted the settings so that a finished clip is followed by the DVD menu, but I'd like to be able to launch the menu from the player without removing and replacing the disk or starting a clip and then interrupting it by selecting Menu.)
AutoCAD Civil 3D :: Contour Labeling
Jul 10, 2012I have recreated two surfaces for my design, existing and proposed. I had used polylines for contours for in each surface. I tried labeling the contours but it will not let me select the contour itself.
I then tried to make the contours to 3d polylines and again added them to the surface and rebuilt. I still am not allowed to label the contour since it doesn't let me select the polyline. I am able to select the surface however.
Revit :: Labeling Parts In 2012?
Jun 10, 2011I wanted to know how people are labeling or taging the "parts" of their construction, like walls. I want to be able to tag the parts so that a description of the part is pulled from the material so a change to the material affects all lables and tags.
The 2 problems I am running into
1. in a 3D mode I cannot use a materials tag, and so have to rely on a Tag by Category, which limits me to the material name. I want to be able to refer to any of the properties in the material identity tag.
2. In a section or plan view, I can use a material tag, so I can refer to Description, Comments Keywords, etc, but the tags keep going blank and need to be "reloaded" anytime I change anything in the view. If I change the crop boundary, change from Show Parts to Show Original and return to Show Parts, change scale, anything; the tags return to ?. I have to select each tag and then click off of them for the parameters to be displayed; I feel like I am back in ADT with refresh and reload all.
AutoCad :: Labeling A Point With A Property Value
May 6, 2011I have imported a DXF file from map info into autocad, these seed points contain x,y values but also if you list properties they also contain other information in this came names. I need these names to appear beside the point in autocad for printing purposes . There are 1619 points and hand tying would be a huge task.
View 3 Replies View RelatedAutoCad :: Labeling Line Bearings
Oct 15, 2007I am doing a few simple plot plans and I would like to find simpler way to place the bearings of the property lines just by clicking on them or the ends of each line like I do for their length. I just use a Aligned dimension with everything turned off except the text so that is parallel with the lot line.
There is probably a simple solution I'm just not finding one, I cut and past the text out of the quick calculation now and rotate it, and I know there's a better way.
AutoCAD Civil 3D :: Labeling A Pipe Between Structures
Sep 26, 2013Any way to label a pipe part way between structures? I would like to be able to label a sanitary line where a service ties in with the main line invert.
C3D 2013
AutoCAD Civil 3D :: Labeling Deflections On Alignment
Feb 9, 2012I read through the previous posts but still I am not able to do this. I am using C3D 2012.
What I need to do is label Deflection angles of an alignment (delta angle). The alignment does not have any curve.
So basically it will be some kind of PI or geometry point label showing the deflection angle.
Labelling LT or RT would be great but at this time I dont need that.
I hope it explains.
AutoCAD 2010 :: Labeling In Paperspace - Dimensions Way Off
Jun 18, 2012We do a lot of labeling in paper space and have been encountering a problem with our dimension command mislabeling lengths and widths. Please see attached DWG. The road width should be 24' and its labeling it 880'. BUT measuring hoizontally it seemed to work fine. Really strange.
I am using the dimension command and snapping nearest and perpendicular. If I just click without using osnap it seems to work.
We tried using the DIM / DIMFLAC / V / and selectiong viewport
The funny thing is that I dont have this problem with every drawing. Just some seem to have this glitch.
AutoCAD Civil 3D :: Labeling Surface Section
Oct 8, 2013I want to label the surface sections (eg, fg) in a single location something like what is shown in the attached image.
Currently I am using a major offset label which refers to the surface description* where the surface name is stored. I set the increment to a suitable number which results in multiple labels along the section. I then drag one into position and delete the rest using ctrl-select. While it would be far easier to use multileaders to acheive the correct look, they don't update location with the section views.
We use the description to store the 'friendly' name as our object naming standard wouldn't necessarily make sense to the viewer of the plans.
AutoCAD Civil 3D :: Labeling Structures In A Network?
Sep 26, 2013I am labeling structures in a network on the profile view. I cannot get the leader when i drag the label to anchor to the top of the structure? Is there a way to do this, i figured out how to have the label insert at the middle of the top line of the structure.
Civil 2014-Infrastructure Design Suite
Windows 7 Professional-SP 1-64 bit system
Intel Core i5-2500K cpu @ 3.3ghz
NVIDIA GeForce GT 430
8.0 gb ram
AutoCAD Civil 3D :: Corridor Section Labeling
Jun 21, 2012how label only the top of my road surface in section view? The road slopes -2% towards a ditch but my my code set labels both the top of road(-2%) and what I assume is the bottom of the road surface (2%) which I don't want to show.
Is it also possible to label my side slopes as 4:1 instead of 25%?
AutoCAD Civil 3D :: Labeling Contours In Every Drawing
Mar 15, 2013I'm running 2012. Is it still true that I need to label my contours in every drawing? I have a drawing that contains my existing surface (about 90 Acres). I have labeled the contours in that drawing. I then have a output drawing that the existing contours are a data shortcut. The contour labels do not show up.
View 3 Replies View RelatedAutoCAD Civil 3D :: Labeling Lines With Their Azimuth
Jul 26, 2013Labeling lines with their azimuth, I wanted to label lines with their azimuth but sounds not to work. I got question marks instead (attached)
View 9 Replies View RelatedAutoCAD Civil 3D :: Labeling All Of Surface Contours At Once?
Nov 6, 2013Often I've found myself dealing with some pretty complicated surfaces that have a lot of nooks and crannies, and many of the contour lines are only in a corner of the surface or are small and closed, and thus when I find myself wanting to have contour labels on all of the contours, there's not really one line I can draw using the "Create Multiple Labels at Interval" option to ensure that every contour is labeled. Thus I end up doing "Create Multiple At Interval" with a few different lines intersecting contours, but I often end up hitting some of the contours multiple times and I get a mess of labels.
I haven't been able to find a way to automatically just multiple labels on all of the contours at an interval in one fell swoop, so I started trying to program one...but then I got stuck with that, too.
Does any built-in method of doing what I want to do, or do I need to continue pursuing a programmatic solution?
AutoCAD Civil 3D :: Make Better The Second Labeling Precision
Aug 17, 2012How can I make better the second labeling precision in Civil 3D? It's only has four digits precision for the seconds. I did change the ambient settings (Lat Long precision to 8) but haven't got the result.
View 4 Replies View RelatedAutoCAD Civil 3D :: Pipe Network Labeling
Jun 11, 2013 I have a drainage model, the data for which has been imported from microdrainage into Civil3d (.sws file) .
The engineer working on the project is playing around with the Invert and Cover levels so I reload the same updated .sws file into my model almost daily expecting the information shown in the labels of the pipes and manholes to simply change. Instead mine seem to disappear and I have to relabel the whole network again.
This wouldn't be much of a problem because labeling only takes a few minutes but with this particular scheme, the client wants the labels shown in a box with a leader. When I relabel, the boxes automatically snap to the center of the manholes without a leader and i then have to drag each one away from the manhole to get the leader to show up.
AutoCAD Civil 3D :: Setting Contour Labeling
Feb 11, 2010Where do I set the contour labeling line to not show or be on layer defpoints. When I click on the label line and right click I can edit the contour label line properties and change the Display contour label line to false but not sure where the style is.
View 9 Replies View RelatedAutoCAD Civil 3D :: Labeling Tin Lines On Surface
Sep 10, 2013Is there away to label (Dynamically) slope arrows and percents on a tin surface (Without Exploding it)?
View 8 Replies View RelatedAutoCad :: Labeling X Y Coordinates And Angle In 2012?
Jun 26, 2012[URL] I want to label my XY coordinates as same as in the above drawing(see the link above) with X and Y values. Unfortunately, i did not accomplish this task till now.
More, i would like to represent the angle between the two lines by just showing the corresponding symbol as he done in the above link with right angle symbol and then labeling the symbol at the top left corner.
AutoCAD Civil 3D :: Labeling Profile With Description
Sep 4, 2013How can I show the description (in this case, MUDSTONE) in a profile label? I've tried modifying the style but the description refuses to appear even though it is one of the available labels.
View 3 Replies View RelatedAutoCAD Civil 3D :: Profile Layout Labeling
Mar 6, 2012When I draw in the profile layout I'm getting odd results when the labeling is placed. See attachment. I have been looking through the styles trying to find what is wrong.
View 9 Replies View RelatedAutoCAD Civil 3D :: Labeling Lines Command
Oct 4, 2013Everytime I use the label line command, when I go to plot my drawing I see a box around my label and the label is either chopped off or missing. A rectangle prints out around where the label is.
View 9 Replies View RelatedAutoCAD Civil 3D :: Labeling Round And Elliptical Pipes
Jun 11, 2013I have a job where there are 3 round pipes and one elliptical pipe going into the same structure. When I put a label on the structure, it shows all 4 pipes, but I can't figure a way to show the elliptical pipe dimensions as 29x45; It only comes in as 45" RCP. I have tried to manipulated the text, but it won't let me me change the individual pipe text in the structure label. When I change the label to read Height x Width, the round pipes show the same as elliptical pipe. Is there a way for my label to show 3 round and 1 elliptical pipe size, or do I have to manually add the elliptical pipe size (which I'd prefer not to do)?
View 9 Replies View RelatedAutoCAD Civil 3D :: Labeling - Arc Using The Angle Rather Than Length Or Radius
Sep 4, 2012Just started a drawing in C3D 2013 using an existing template. If I draw an arc using the "Angle" rather than length or radius, entering the angle as 11.1601, then label the arc, the delta angle is converted to hms or 11.0936 . The template and labeling style are ones we've used for several releases. I've compared the feature settings, units and the curve labeling command and can not find where this is being changed.
View 8 Replies View RelatedAutoCAD Civil 3D :: Labeling Profiles From Data References
Nov 17, 2013We recently started using Civil3d 2013. We made a huge jump from LDD 2008. We have profiles designed and data short cuts are created. We have existing and proposed.
Now i've created a reference and brought them into another drawing. First I tried to set up the color and linetype for each profile. When I do this. Both the existing and proposed become the same color and linetype.I do not see how to select the existing from the proposed and set the color and linetype.
Next I select the proposed profile and right click and select Edit Labels. I start to create the PVI labels. When I do this the PVI's for the existing profile get labeled. I want the proposed profile labeled. Not the existing.
AutoCAD Civil 3D :: Labeling Round / Elliptical Pipes
Jun 6, 2013I have a job where there are 3 round pipes and one elliptical pipe going into the same structure. When I put a label on the structure, it shows all 4 pipes, but I can't figure a way to show the elliptical pipe dimensions as 29x45; It only comes in as 45" RCP. I have tried to manipulated the text, but it won't let me me change the individual pipe text in the structure label. When I change the label to read Height x Width, the round pipes show the same as elliptical pipe. Is there a way for my label to show 3 round and 1 elliptical pipe size, or do I have to manually add the elliptical pipe size (which I'd prefer not to do)?
I've attached a pdf of the structure in question.
AutoCAD Civil 3D :: Section View Group Labeling?
Sep 5, 2013I have multiple alignments. When I create a section view group I would like a label at the top or bottom that is the alignment name. I cant find this option and I'm certain it exists!
View 6 Replies View Related