Photoshop :: Labeling A Bottle?
Jan 13, 2004
I have made an ettiquette for a bottle. (just a square with some design on it)
What I want to do is to merge my design on a photo of a bottle ( Picture of the bottle is taken from the side).
Now the problem is that the natural perspective of a normal bottle is that it bulges a bit to the bottom and to the top (because of the circular forms)
So how can I bulge my label slightly to match perspective of the bottle? (not sideways, but the top/bottom of the label)
I have tried everything (i think) with the transformation tools in photoshop, but none of them can disort a picture from the center top and center bottom. Only from the sides and the corners..
I spoke to a photoshop guru about my problem but he could not get around the problem either. He advised me to take the whole project in to a 3d application, but I feel that if there was an easy way to do this in photoshop it would save me lots of time.
View 9 Replies
ADVERTISEMENT
Jan 7, 2005
I am trying to crop a bottle of wine. How can I do this?
View 3 Replies
View Related
Nov 23, 2004
I am tring to created a glass bottle that looks like a shape of a lemon is stuck inside of it. This would be the shape of only the middle of the bottle.
View 7 Replies
View Related
Oct 9, 2013
I have a photograph of a jar and a smart object which is my label. If I go: >3D >New mesh from layer >Mesh preset >Cylinder - then the label is wrapped around the cylinder and is actually perfect - job done.
Questions:
- How to I make the Cylinder transperant so I only see the label
- How do I get out of the 3D window so I can place my wrapped label on the photograph of the jar?
I can't work this out (I have previous experience with Cinema 4d and Modo) or find instructions/YouTube videos that make sense.
View 11 Replies
View Related
Feb 17, 2013
Is there anyway to change the color of the milk in this bottle or put in a different liquid entirely while keeping it looking realistic? If so, how?
View 1 Replies
View Related
Sep 15, 2005
I have a nice image of a bottle and want to add some effects to it to make it stand out. What do you think of a spotlight or cool reflection? It has a product label on it though.
View 5 Replies
View Related
Jun 1, 2005
I'm using PS7 & I have an image of a blank beer bottle & I would like to wrap a label around it.
View 9 Replies
View Related
Jan 30, 2013
I'm trying to superimpose a label I made in Photoshop on an image of a glass bottle. I have to provide a front and rear view (so obviously the label will be reversed on the rear). The problem I'm having is with the back-side of the label. I'm trying to make it look like it's on the other side of the bottle and therefore require some kind of glass diffusion simulation.
View 5 Replies
View Related
Nov 30, 2013
How do you create a shadow effect like the one on the bottles in the attached pic? I have a different wine bottle I want to do it on .
View 1 Replies
View Related
Sep 13, 2012
I've never worked with 3D effect before (not even in the earlier versions), until now when I finally need it. I've therefore searched the Internet and the Adobe Forums in order to get to know how to wrap a text/image around a glass bottle in Photoshop CS6. I've found several answers and tutorials, but none of them regards CS6 or they are simply too primitive, whereby the effect is too fake. But when I try follow the instructions in the explanations/tutorials I've found so far for earlier versions of Photoshop (especially regarding 3D effects), I can't find the right buttons, commands, etc. - I can't make it work. how to do wrap a text/image around a bottle/cylinder/object in Photoshop CS6?
View 7 Replies
View Related
Apr 11, 2013
Trying to create a water bottle lable 8 1/2 by 2 1/2 and i wanted to know if i could do that with photoshop elements.... I also wanted to include my daughters pic on it for her first birthday..
View 1 Replies
View Related
Oct 14, 2012
I have a label, like a rectangular shape, and I want to place it on a picture of a bottle and give the label the same curve as the bottle.
How to curve the label ?
View 3 Replies
View Related
Sep 7, 2012
I am struggling to create a glass bottle and etch the logo into the side of it. Do I use a boolean or should I map an image?
View 1 Replies
View Related
Jan 6, 2012
I'm working on some bottle concepts and I have a need to model standard plastic bottle threads. These threads are designated by a diameter in mm and how many threads are on the bottle. Example: 33-400 The 33 is the diameter and 400 refers to a single turn of the cap. Manufacturers like Aptar make bottle tops of various types to fit this spec. I happen to be looking at dispensing lids (think Heinz Ketchup bottle). While I've found specs for Major diameter, Minor diameter and TPI, I have found precious little that describes the thread shape itself. I've tried to reverse engineer a sample thread from... you guessed it.. a Heinz Ketchup bottle. I feel that my venier caliper and micrometer are not doing this effort justice.
Looking for DWG file or Inventor model of the thread profile?
I'm using the coil command to create the thread on the bottle neck. It works okay. An issue arises with the thread termination. The threads on the bottle itself "chamfer" into the bottle neck. While I don't think I can do this with the coil command itself, how to create the "lead-in" for the plastic thread.
View 8 Replies
View Related
Apr 15, 2012
How can I create a label for a live bottle with a lot of curves on it?
View 3 Replies
View Related
Aug 1, 2013
I have recently set up a new PC with pretty high end specs and have noticed Inventor still doesnt perform as expected, i am using maybe 5% of my 64gb ram and 10-20% of my i7 4ghz CPU.
We are using a network vault and the content center is stored on the vault, using frame generator i have noticed significant performance problems (considering these specs)
Could it be a bottle neck in the Server?
(latest service pack for Inventor 2013 installed) 64 bit machine.
Quodro k200d GPU
View 1 Replies
View Related
May 26, 2004
Is there an option to lable a batch images
I need to place them on my site but I want to have a site name on them (not renaming ,actualy inprinting the site name on them)
View 1 Replies
View Related
Jul 8, 2006
i'm trying to figure out the way to be able to make a label and put it in the corner of all my pics without having to do each one. I have thousands of pics to be labeled and doing each one would take a ton of time.
View 2 Replies
View Related
Feb 4, 2013
I am designing perfume bottles and for that i need to to repeat a semi circle to repeat over a curved surface fo the bottle. To simplify the problem i have created curved surface and made a semi cirle as a feature, now i want the feature to repeat on the curved surface. I have tried to rectangle pattern, aswell as the circular pattern in all possible ways i can think.
P.s. I have hp I7 processor, 8 gb ram, windows 7 and am using autodesk inventor pro 2013
View 4 Replies
View Related
Jun 3, 2013
A small problem, but one I thought it can't hurt to ask about. At least on my DVD/Blu Ray player, when a DVD is stopped while playing, the tv monitor's screen reverts to a home page that lists the name(s) of the movies on the inserted DVD. So if the DVD is Star Wars, the screen will display something like "Star Wars: the Movie" and "Star Wars: Additional Content," which represents the two titles the player recognizes from the inserted disk. (Note that this is not the DVD menu, but something the player is reading from the disk prior to launching DVD.) When the inserted DVD has been created by Video Studio Pro X6 and is then stopped, if there are, say, two film clips on the DVD, the screen displays Just the words "Title 1" and "Title 2".
My first question, then, is whether VS Pro X6 allows me to give the clips actual titles, say "The Zoo," and "The Park," so that these titles, rather than the generic "Title 1" and "Title 2" will display when the DVD is stopped.
My second question is whether VS Pro X6 allows me to issue instructions so that when "The Zoo" or "The Park" (or for that matter "Title One" or "Title 2") is selected from the player, that the DVD's menu will come up rather than the selected clip. (This question is even less important than the first, but while I'm on the topic, thought I'd ask; I have adjusted the settings so that a finished clip is followed by the DVD menu, but I'd like to be able to launch the menu from the player without removing and replacing the disk or starting a clip and then interrupting it by selecting Menu.)
View 9 Replies
View Related
Jul 10, 2012
I have recreated two surfaces for my design, existing and proposed. I had used polylines for contours for in each surface. I tried labeling the contours but it will not let me select the contour itself.
I then tried to make the contours to 3d polylines and again added them to the surface and rebuilt. I still am not allowed to label the contour since it doesn't let me select the polyline. I am able to select the surface however.
View 1 Replies
View Related
Jun 10, 2011
I wanted to know how people are labeling or taging the "parts" of their construction, like walls. I want to be able to tag the parts so that a description of the part is pulled from the material so a change to the material affects all lables and tags.
The 2 problems I am running into
1. in a 3D mode I cannot use a materials tag, and so have to rely on a Tag by Category, which limits me to the material name. I want to be able to refer to any of the properties in the material identity tag.
2. In a section or plan view, I can use a material tag, so I can refer to Description, Comments Keywords, etc, but the tags keep going blank and need to be "reloaded" anytime I change anything in the view. If I change the crop boundary, change from Show Parts to Show Original and return to Show Parts, change scale, anything; the tags return to ?. I have to select each tag and then click off of them for the parameters to be displayed; I feel like I am back in ADT with refresh and reload all.
View 9 Replies
View Related
May 6, 2011
I have imported a DXF file from map info into autocad, these seed points contain x,y values but also if you list properties they also contain other information in this came names. I need these names to appear beside the point in autocad for printing purposes . There are 1619 points and hand tying would be a huge task.
View 3 Replies
View Related
Oct 15, 2007
I am doing a few simple plot plans and I would like to find simpler way to place the bearings of the property lines just by clicking on them or the ends of each line like I do for their length. I just use a Aligned dimension with everything turned off except the text so that is parallel with the lot line.
There is probably a simple solution I'm just not finding one, I cut and past the text out of the quick calculation now and rotate it, and I know there's a better way.
View 9 Replies
View Related
Sep 26, 2013
Any way to label a pipe part way between structures? I would like to be able to label a sanitary line where a service ties in with the main line invert.
C3D 2013
View 7 Replies
View Related
Feb 9, 2012
I read through the previous posts but still I am not able to do this. I am using C3D 2012.
What I need to do is label Deflection angles of an alignment (delta angle). The alignment does not have any curve.
So basically it will be some kind of PI or geometry point label showing the deflection angle.
Labelling LT or RT would be great but at this time I dont need that.
I hope it explains.
View 9 Replies
View Related
Jun 18, 2012
We do a lot of labeling in paper space and have been encountering a problem with our dimension command mislabeling lengths and widths. Please see attached DWG. The road width should be 24' and its labeling it 880'. BUT measuring hoizontally it seemed to work fine. Really strange.
I am using the dimension command and snapping nearest and perpendicular. If I just click without using osnap it seems to work.
We tried using the DIM / DIMFLAC / V / and selectiong viewport
The funny thing is that I dont have this problem with every drawing. Just some seem to have this glitch.
View 5 Replies
View Related
Oct 8, 2013
I want to label the surface sections (eg, fg) in a single location something like what is shown in the attached image.
Currently I am using a major offset label which refers to the surface description* where the surface name is stored. I set the increment to a suitable number which results in multiple labels along the section. I then drag one into position and delete the rest using ctrl-select. While it would be far easier to use multileaders to acheive the correct look, they don't update location with the section views.
We use the description to store the 'friendly' name as our object naming standard wouldn't necessarily make sense to the viewer of the plans.
View 8 Replies
View Related
Sep 26, 2013
I am labeling structures in a network on the profile view. I cannot get the leader when i drag the label to anchor to the top of the structure? Is there a way to do this, i figured out how to have the label insert at the middle of the top line of the structure.
Civil 2014-Infrastructure Design Suite
Windows 7 Professional-SP 1-64 bit system
Intel Core i5-2500K cpu @ 3.3ghz
NVIDIA GeForce GT 430
8.0 gb ram
View 1 Replies
View Related
Jun 21, 2012
how label only the top of my road surface in section view? The road slopes -2% towards a ditch but my my code set labels both the top of road(-2%) and what I assume is the bottom of the road surface (2%) which I don't want to show.
Is it also possible to label my side slopes as 4:1 instead of 25%?
View 4 Replies
View Related
Mar 15, 2013
I'm running 2012. Is it still true that I need to label my contours in every drawing? I have a drawing that contains my existing surface (about 90 Acres). I have labeled the contours in that drawing. I then have a output drawing that the existing contours are a data shortcut. The contour labels do not show up.
View 3 Replies
View Related
