AutoCad :: Labeling Line Bearings
Oct 15, 2007
I am doing a few simple plot plans and I would like to find simpler way to place the bearings of the property lines just by clicking on them or the ends of each line like I do for their length. I just use a Aligned dimension with everything turned off except the text so that is parallel with the lot line.
There is probably a simple solution I'm just not finding one, I cut and past the text out of the quick calculation now and rotate it, and I know there's a better way.
View 9 Replies
ADVERTISEMENT
Apr 6, 2010
First off I'm using AutoCAD 2008 and I'm trying to input survey points to establish a subdivision.
My units are set as follow: length type: decimal with precision set at: 0.00. Angle type: Surveyor's Units with precision set at: N 0d00'00" E. Units to scale inserted content: feet.
I have a specific point at which i want to start from and that is 1421334.93,78320.62 which is my benchmark. I want to start my next point at 113.66 feet away from this benchmark at a bearing of N 5d27'23" W. So far I have tried using the command @113.66<N5d27'23"W but nothing happens.
View 9 Replies
View Related
Jul 3, 2012
I have a bunch of lines that are created with multiple segments. I'd like to annotate the total length. I can't figure out to do this without labelling each segment along the line using Line and Curve commands. How do I get one annotation that only shows the total of all the sements?
View 9 Replies
View Related
Aug 25, 2011
Curve tags number okay but the line tags keep numbers when curves are in between. Happens in both 2011 and 2012.
View 1 Replies
View Related
Sep 26, 2011
I am trying to figure out how to change the labeling of my sample line style from (<[Sample Line Number(Sn)]> which out puts a count of 1,2,3,4 etc to output A,B,C,D etc.
View 4 Replies
View Related
Feb 7, 2012
I am trying to draw a parcel map using AutoCAD MAP 3D, using distances and bearings that were added by to the original hand-made drawing by the surveyor. The parcels don't quite close perfectly... what the acceptable tolerances are for parcels of say 1 acre and under, 1-5 acres, and 5-20 acre sites?
View 2 Replies
View Related
Feb 20, 2013
I have tried unsuccessfully to draw lines using bearings as a surveyor draws them. I have seen a number of posts here and on the web, but they relate to northern and easting’s, but as you can see on the attached PDF from a surveyor they have used only bearings. I’m not a surveyor, my background is mechanical so this is all new to me. what units and settings I may need to change in order to draw using these bearings. I’m using Autocad 2012, and the attached PDF relates to some blocks of land in Australia (just in case that makes a difference in the settings)
View 7 Replies
View Related
Oct 8, 2012
I'm working with site plans and have a lot of distances and bearings in my drawing.
Sometimes i need to reverse them. Is there a command in AutoCAD 2012 where you can reverse a hole heap of distances and bearings all at once? Mirror make them up side down. I want them to swop sides of the line they refer to.
View 9 Replies
View Related
Jul 19, 2013
I haven't used Autodesk directly since Land Development 2i. I remeber being able to draw lines by distances and bearings with the numeric keypad. The bearing quadrant / DMS input was a fast way to draw parcels from an existing map. When I got to a curve, I remember being able to input radius and Delta angle. I've been trying to find those functions for months now. I found the Line by Bearing command and that works well as long as I don't run into a curve.
How do you draw a curve that's tangent to the previous line with the radius and delta angle? I've been going back to AutoCAD version 12 methods. That is, offset the previous line. draw a circle from the end of the offset. draw a line between the center of the curve and the end of the previous line. Rotate that line with the 12d34'56" format. trim the curve and erase the extra lines.
I've gone through all the curve drawing options in the home menu.I found the CoGo editor in the survey menu but it doesn't draw curves. It just draws a line from the beginning of the curve to the center and continues the traverse from the radius point of the curve. That's obviously either a serious misunderstanding of input or a program bug.
View 9 Replies
View Related
Jul 21, 2009
Any way to add a (R) to the Bearing dislpay, to indicate a radial bearing, in a Line Table?? This would only apply to certain lines, not all of them. I can specify which line. That function does not need to be automatic.
View 9 Replies
View Related
Jan 21, 2011
I have a problem where the Inverse Report is returning values of "N 89-59-60 E" instead of "N 90-0-0 E".
I have attached a screenshot. A simple rectangular parcel rotated 1 degree.
The head of our survey department is going nuts trying to check things.
Civil 3D 2011 (SP1)
Windows 7 (32 bit)
View 4 Replies
View Related
Oct 25, 2012
I draw property plats for a surveyor and looking for a way to add the bearings (for example: N 56 15' 32" E) along the property lines. Right now, I use the Distance command to find out the bearing, write it down, and then add it to the aligned linear dimension text. I'm guessing there's a faster way to get a bearing along with the distance without typing it in.
View 2 Replies
View Related
Jan 18, 2013
I have a very frequent need to draw lines that radiate out from a point on different bearings and distances. I think of this as a sideshot.
_/_
|
Civil 3D’s sideshot command acts differently. It draws lines between the radial end points.
/
|
Do you know what command is needed to do what I want? It is not the Create Line by Side Shot command.
View 6 Replies
View Related
Apr 11, 2013
Some times we use standard parts which we could not find in content center. We creat part ourselves. But it looks like standard part in BOM or part explorer window...
I want to change type of part to PURCHASED type and icon like other purchased parts like bearings or bolts...
Is this possible?...
It can be also assembly parts like bearings. Bearings have many parts but it looks only one part in part explorer. This is very good. I want same thing too...
View 9 Replies
View Related
Jul 10, 2012
I have recreated two surfaces for my design, existing and proposed. I had used polylines for contours for in each surface. I tried labeling the contours but it will not let me select the contour itself.
I then tried to make the contours to 3d polylines and again added them to the surface and rebuilt. I still am not allowed to label the contour since it doesn't let me select the polyline. I am able to select the surface however.
View 1 Replies
View Related
May 6, 2011
I have imported a DXF file from map info into autocad, these seed points contain x,y values but also if you list properties they also contain other information in this came names. I need these names to appear beside the point in autocad for printing purposes . There are 1619 points and hand tying would be a huge task.
View 3 Replies
View Related
Sep 26, 2013
Any way to label a pipe part way between structures? I would like to be able to label a sanitary line where a service ties in with the main line invert.
C3D 2013
View 7 Replies
View Related
Feb 9, 2012
I read through the previous posts but still I am not able to do this. I am using C3D 2012.
What I need to do is label Deflection angles of an alignment (delta angle). The alignment does not have any curve.
So basically it will be some kind of PI or geometry point label showing the deflection angle.
Labelling LT or RT would be great but at this time I dont need that.
I hope it explains.
View 9 Replies
View Related
Jun 18, 2012
We do a lot of labeling in paper space and have been encountering a problem with our dimension command mislabeling lengths and widths. Please see attached DWG. The road width should be 24' and its labeling it 880'. BUT measuring hoizontally it seemed to work fine. Really strange.
I am using the dimension command and snapping nearest and perpendicular. If I just click without using osnap it seems to work.
We tried using the DIM / DIMFLAC / V / and selectiong viewport
The funny thing is that I dont have this problem with every drawing. Just some seem to have this glitch.
View 5 Replies
View Related
Oct 8, 2013
I want to label the surface sections (eg, fg) in a single location something like what is shown in the attached image.
Currently I am using a major offset label which refers to the surface description* where the surface name is stored. I set the increment to a suitable number which results in multiple labels along the section. I then drag one into position and delete the rest using ctrl-select. While it would be far easier to use multileaders to acheive the correct look, they don't update location with the section views.
We use the description to store the 'friendly' name as our object naming standard wouldn't necessarily make sense to the viewer of the plans.
View 8 Replies
View Related
Sep 26, 2013
I am labeling structures in a network on the profile view. I cannot get the leader when i drag the label to anchor to the top of the structure? Is there a way to do this, i figured out how to have the label insert at the middle of the top line of the structure.
Civil 2014-Infrastructure Design Suite
Windows 7 Professional-SP 1-64 bit system
Intel Core i5-2500K cpu @ 3.3ghz
NVIDIA GeForce GT 430
8.0 gb ram
View 1 Replies
View Related
Jun 21, 2012
how label only the top of my road surface in section view? The road slopes -2% towards a ditch but my my code set labels both the top of road(-2%) and what I assume is the bottom of the road surface (2%) which I don't want to show.
Is it also possible to label my side slopes as 4:1 instead of 25%?
View 4 Replies
View Related
Mar 15, 2013
I'm running 2012. Is it still true that I need to label my contours in every drawing? I have a drawing that contains my existing surface (about 90 Acres). I have labeled the contours in that drawing. I then have a output drawing that the existing contours are a data shortcut. The contour labels do not show up.
View 3 Replies
View Related
Jul 26, 2013
Labeling lines with their azimuth, I wanted to label lines with their azimuth but sounds not to work. I got question marks instead (attached)
View 9 Replies
View Related
Nov 6, 2013
Often I've found myself dealing with some pretty complicated surfaces that have a lot of nooks and crannies, and many of the contour lines are only in a corner of the surface or are small and closed, and thus when I find myself wanting to have contour labels on all of the contours, there's not really one line I can draw using the "Create Multiple Labels at Interval" option to ensure that every contour is labeled. Thus I end up doing "Create Multiple At Interval" with a few different lines intersecting contours, but I often end up hitting some of the contours multiple times and I get a mess of labels.
I haven't been able to find a way to automatically just multiple labels on all of the contours at an interval in one fell swoop, so I started trying to program one...but then I got stuck with that, too.
Does any built-in method of doing what I want to do, or do I need to continue pursuing a programmatic solution?
View 5 Replies
View Related
Aug 17, 2012
How can I make better the second labeling precision in Civil 3D? It's only has four digits precision for the seconds. I did change the ambient settings (Lat Long precision to 8) but haven't got the result.
View 4 Replies
View Related
Jun 11, 2013
I have a drainage model, the data for which has been imported from microdrainage into Civil3d (.sws file) .
The engineer working on the project is playing around with the Invert and Cover levels so I reload the same updated .sws file into my model almost daily expecting the information shown in the labels of the pipes and manholes to simply change. Instead mine seem to disappear and I have to relabel the whole network again.
This wouldn't be much of a problem because labeling only takes a few minutes but with this particular scheme, the client wants the labels shown in a box with a leader. When I relabel, the boxes automatically snap to the center of the manholes without a leader and i then have to drag each one away from the manhole to get the leader to show up.
View 7 Replies
View Related
Feb 11, 2010
Where do I set the contour labeling line to not show or be on layer defpoints. When I click on the label line and right click I can edit the contour label line properties and change the Display contour label line to false but not sure where the style is.
View 9 Replies
View Related
Sep 10, 2013
Is there away to label (Dynamically) slope arrows and percents on a tin surface (Without Exploding it)?
View 8 Replies
View Related
Jun 26, 2012
[URL] I want to label my XY coordinates as same as in the above drawing(see the link above) with X and Y values. Unfortunately, i did not accomplish this task till now.
More, i would like to represent the angle between the two lines by just showing the corresponding symbol as he done in the above link with right angle symbol and then labeling the symbol at the top left corner.
View 6 Replies
View Related
Sep 4, 2013
How can I show the description (in this case, MUDSTONE) in a profile label? I've tried modifying the style but the description refuses to appear even though it is one of the available labels.
View 3 Replies
View Related
