to improve a logo i found on the internet...
I simply want it to look high quality, right now its kind of blurred and low quality looking... I want it to look like I just made it, like it should at high quality.
I have 5 images in png format and I need to take license plate of a taxi from them. I tried a few techniques but couldn't improve the quality enough. The images are on the attachment and license plate is written on front door of the taxi.
View 3 Replies View RelatedThis is a photograph that was taken about a year ago with a standard point-and-shoot Kodak CX4230. The problem, as you can see, is bright sunlight behind the subjects, and therefore they are very dark. I've tried, but can not seem to improve it much, maybe it's impossible, I don't know. But I was wondering if some of you guys would take a stab at improving the photo.
View 4 Replies View Relatedcurrently work on a large (30.000x5.000 px) image, that is supposed to go to print soon. still i am not happy with its "fake" 3d appearance. the below link shows two cut outs. i would like to get this thing a little "rounder" - a little more floating above the surface. i already tried inner shadow, yet with no success. is it maybe the shadow, that should be made a little more realistic?
View 9 Replies View RelatedI'm trying to emulate the 'Fox Studio' logo to add to my dvd covers I make from tv captures.
I'd also like to something similar with the MGM and Republic logos too.
These are for my own personal use...don't want any problems with trademark issues.
How to increase the resolution of the picture.
View 4 Replies View Relatedimprove this picture resolution? Is it possible?
View 2 Replies View RelatedI was at an event a few months ago that Kal Penn was at and took a picture with him but unfortunately only had my Blackberry to take the picture. I've tried to improve the picture quality in Photoshop 7.0 myself but I just can't seem to get this picture to look any better.
How to make the picture better quality? There is a lot of noise and it's just all around low quality. I've attached the full size picture but feel free to resize it if that makes it easier to edit.
I'm working on this fake magazine cover
and I'm just trying to tweak so it looks 100% legit. Specifically what font to use, text color and text placement. I know some of the white text is hard to read...what color could I change it to without messing up my color scheme?
how to increase lighting in (say room) photos as seen in the attachment.
Basically I would like to improve on the lighting in my room photos so they actaully appear as if the room is well lit.
which affects and filters do you recomend i use to improve the quality of this photograph, it was taken with a phone in the dark so is terrible quality.
View 3 Replies View RelatedHow can improve the colors and contours of the image?
View 3 Replies View RelatedI have an image that is about 72 DPI, but I want to increase the quality of it. I also have another image that is 300 DPI, but looks the same in quality to the 72 DPI one. Is there a way to improve the resolution on the latter image as well?
View 1 Replies View RelatedI've taken a picture on a digital camera in a dimly lit room. Having downloaded it to PC, the picture has a horrible yellow/orange tinge from the light bulb. How can I correct this using Photoshop CS and improve the colours without washing them out or introducing image noise.
View 1 Replies View Relatedreplaced the head on the attached photo and would like to use this for an employee presentation. How I can make it look a little more real? The employees are going to know that it was photoshopped, but still would like to make it better if possible. I still feel the head is a little too bright.
View 5 Replies View RelatedAny way to improve a photo in GIMP so that it can be printed in larger formats? Enlarging seems to be okay, adding a black bg and setting layer mode to overlay also seems to have worked, but as I am aiming at selling my photos, I want to be 100% sure I deliver a good enough product!
View 1 Replies View Relatedtrying to copy txt from an outside text editor and pasting them into an open, editable text layer in my workspace. The problem is that I can COPY the text fine, but when I click over to PS to paste it into the open editable text layer it either pastes the previous text from my clipboard OR it won't paste anything at all. I can then go into any other text field on a browser, spreadsheet document, a different text editor, notepad, etc and successfully paste the proper batch of text I wanted to paste into PS. Sometimes I have some rather large files open 50+megs when I notice this happen. I have to save my work and close out entirely of PS and then open it again before I can begin editing my original document again and successfully paste the text into the open editable text layer. This may last for a few COPY/PASTE sessions of additional text in additional text layers, but then begins displaying the symptoms I described above.
I am on Win7 on an AlienWare M17XR3 laptop with 16G RAM and AMD Radeon HD 6900M Series display adapter.I assume it's either in my PS performance settings which I have PS using 10413MB RAM and has over 350G scratch disk space. If it's not that I guess my laptop system performance settings which I've never tinkered with since I purchased it.
Using CS 2 on Win XP
Simple question:
am trying to edit a text layer but i am unable to open the text box to change text.
It creates a new text layer everytime i click on the layer.
Text is allowed only on the outside of a rectangle shape. The text cursor disappears when I try to enter it into the rectangle and when I place it on the edge of the rectangle, it rurns into a slanted "A" and allows texting on the border of the rectangle. Corel Paint Shop Photo Pro X3 (build date Sept 7, 2010). This software came with my new HP Pavilion dv7.
View 1 Replies View RelatedWhen you centrally allign text horizontally and vertically in a text box, the text sits slightly high of the centre. Is there any way of setting an action or setting to deal with this rather than adjusting by eye every time?
View 4 Replies View RelatedI have designed a C# application to To Print I Cards Of School. Here I am sending data from my application to a CDR FILE (Already Created ) Which Contains ADDRESS Text Field..Now I Need to Print Address(which contains 60 characters or more) on this Text field .
I Have Used The following c# Code.. To Replace Address text field that contains text 'Address '.....
s.Text.Replace('Address',"Text To be replaced .......")...here s is Active shape...
This Works Fine But How can i WRAP TEXT....of Address field.
When I insert text with either the TEXT command or MTEXT command, the text is displayed mirrored. This doesn't seem to have anything to do with the MIRRTEXT variable because that is used when I'm actually mirroring the text. In my case, the text is mirrored as soon as I insert it. How can I get it back to normal? Is there a variable I'm missing?
I'm using AutoCAD LT 2012 .
i switched gimp 2.6 to 2.8 and new text tool behaves strangely, as i remember in gimp 2.6 when i try to change text content with selecting old text and pasting new text i could use same text size and same font with my old text without doing anything but now in the gim 2.8 whenever i try to change content of a text layer i need to choose again font and text size from toolbox options, but why do i have to do this, i have a text placed on my image with a certain font and certain font size and i just want to alter my text conten not the size of text or font , it changes automatically to back text size and font whatever i used last time in another work.
summary: i want to change my text content without setting my font and font size properties, i want to use my text layers old properties
Using CS5, dropdowns are black, gray text, some positions require hover to see text. How to fix?
View 1 Replies View RelatedAny ideas how ot fix this? Every time I try to enter text, the edges of the text is surrounded/selected with lines going around it....how do I stop that and have it stop turning my image red (Its supose to be brown, until I click it then it turns red), it isnt even using the correct colors that I set it at.
View 2 Replies View Relatedwhen entering text, mega spaces seem to be a default between lines of text. Changing the leading does nothing to correct this. Thinking that my software became corrupted, I deactivated and reinstalled. But the problem persists. If I type the text into Word, cut and paste into PSE10, the problem continues.
View 1 Replies View RelatedRunning PSE 9 under Mac Snow Leopard.
I have a family photo including many text layers. I'm trying to edit the text in a selected large multi-line text layer. I'm following the steps from the appropriate PSE article, but I always end up creating a new layer and the red/green no-go/go option. I thought I should just be able to double-click the text layer and start editing.
When attempting to add text to a photo, the typed text is not visible on the layer in the "Layers Box" until exiting the Text Tool. Text nexer is visible on the photo Background image. If the edited image is saved, the added typed text is not saved; only the original Background image. How do I reset the Text Tool so it will be functional?
View 3 Replies View RelatedUsing Elements 9 I was adding black text to a .jpg image. Somehow during the process, the text being entered defaulted to a "wavy, illegible set of characters". Spent 30+ minutes looking at FAQs and have given up. I want to reset to default simple clear black characters. Closing and restarting Elements does not resolve this issue. When ending a newly entered set of text - still get "wavy, illegible set of characters!"
View 6 Replies View RelatedI've got some Text Layers in my CS6 document.
In CS5, if I had Text Layers and changed the text on the layer (by double-clicking the "T" icon of the specific Layer in the Layers palette), the name of the Layer would change to reflect the new text I entered.
For some reason this behavior is gone in CS6. So, for example:
• I have a Text Layer with the word "Email" on my canvas. The Text Layer name also reads "Email".
• I double-click the "T" icon of the Email Layer to edit the text on canvas.
• I enter new text, "Contact". The text on canvas updates to "Contact", but the Layer Name remains "Email".
So, for accurate Layer names, I find myself having to change the text twice: once on the canvas, and then manually updating the Layer name as well. Is there an option or preference somewhere that I'm missing that would re-enable the behavior from CS5?
Is there a way to export text from InDesign to Photoshop and preserve the type as editable text in an area text box, similar to the export to PSD in Illustrator? Designed many web site pages in InDesign, and now need to covert all pages over to Photoshop quickly.
View 4 Replies View Related