I'm trying to emulate the 'Fox Studio' logo to add to my dvd covers I make from tv captures.
I'd also like to something similar with the MGM and Republic logos too.
These are for my own personal use...don't want any problems with trademark issues.
to improve a logo i found on the internet...
I simply want it to look high quality, right now its kind of blurred and low quality looking... I want it to look like I just made it, like it should at high quality.
This is a photograph that was taken about a year ago with a standard point-and-shoot Kodak CX4230. The problem, as you can see, is bright sunlight behind the subjects, and therefore they are very dark. I've tried, but can not seem to improve it much, maybe it's impossible, I don't know. But I was wondering if some of you guys would take a stab at improving the photo.
View 4 Replies View Relatedcurrently work on a large (30.000x5.000 px) image, that is supposed to go to print soon. still i am not happy with its "fake" 3d appearance. the below link shows two cut outs. i would like to get this thing a little "rounder" - a little more floating above the surface. i already tried inner shadow, yet with no success. is it maybe the shadow, that should be made a little more realistic?
View 9 Replies View RelatedHow to increase the resolution of the picture.
View 4 Replies View Relatedimprove this picture resolution? Is it possible?
View 2 Replies View RelatedI have 5 images in png format and I need to take license plate of a taxi from them. I tried a few techniques but couldn't improve the quality enough. The images are on the attachment and license plate is written on front door of the taxi.
View 3 Replies View RelatedI was at an event a few months ago that Kal Penn was at and took a picture with him but unfortunately only had my Blackberry to take the picture. I've tried to improve the picture quality in Photoshop 7.0 myself but I just can't seem to get this picture to look any better.
How to make the picture better quality? There is a lot of noise and it's just all around low quality. I've attached the full size picture but feel free to resize it if that makes it easier to edit.
I'm working on this fake magazine cover
and I'm just trying to tweak so it looks 100% legit. Specifically what font to use, text color and text placement. I know some of the white text is hard to read...what color could I change it to without messing up my color scheme?
how to increase lighting in (say room) photos as seen in the attachment.
Basically I would like to improve on the lighting in my room photos so they actaully appear as if the room is well lit.
which affects and filters do you recomend i use to improve the quality of this photograph, it was taken with a phone in the dark so is terrible quality.
View 3 Replies View RelatedHow can improve the colors and contours of the image?
View 3 Replies View RelatedI have an image that is about 72 DPI, but I want to increase the quality of it. I also have another image that is 300 DPI, but looks the same in quality to the 72 DPI one. Is there a way to improve the resolution on the latter image as well?
View 1 Replies View RelatedI've taken a picture on a digital camera in a dimly lit room. Having downloaded it to PC, the picture has a horrible yellow/orange tinge from the light bulb. How can I correct this using Photoshop CS and improve the colours without washing them out or introducing image noise.
View 1 Replies View Relatedreplaced the head on the attached photo and would like to use this for an employee presentation. How I can make it look a little more real? The employees are going to know that it was photoshopped, but still would like to make it better if possible. I still feel the head is a little too bright.
View 5 Replies View RelatedMy Video Studio X5 refuses to create DVD's.
The system runs fine apart from that. When I go to Share, Create Disc, DVD, then check Create Disc, Create DVD Folders, Create Disc Image, Normalize Audio, Delete Temporary Files in Working Folder. Then Click Burn, everything proceeds as normal until both progress bars reach 99%, then I get the following message " Unspecified Error -- 5.0.0".
Nothing gets transferred to disc. This is the same for all projects. I have already tried re-installing VS X5. Nothing seems to make any difference.
I have a version of VideoStudio Pro X3 that came pre-installed on an HP computer. It tends to crash, but I can muddle thru to the point where I can save a project as a video file. Once that step is done, there is no option, not even a greyed out button, that allows me to burn a DVD. The saved file is there, just can't do anything with it. Been thru the process and the instructions several times, the option to burn disks seems to be missing. Is this some sort of trial version, maybe stripped down? The option to export to portable device is also limited to low res WMV, no MP4, 3g2, etc.
I tried to run an update, but the program comes back stating that no new updates are available.
I have been using Ulead VS 11+ for some time with great results. I recently upgraded to Corel VideoStudio Pro X3. The video capturing and editing works flawlessly however when I then want to burn the video to DVD by selecting the “share” tab and make disk it seems to start up DVD Factory which I find totally lame compared to the DVD burning associated with SV11. There seems to be no advanced functions accessible, I can’t seem to insert a photo into the back ground of the menu title, I can't create new decorations to create new back grounds for my title, I can’t burn the project to an .iso file etc. etc. In addition if you save the project and then come back to it later it does not pick up you saved project, and it does not indicate where it has saved to project. Am I missing something here. At the moment I edit in SV ProX3 and burn in VS11.
View 6 Replies View RelatedAny way to improve a photo in GIMP so that it can be printed in larger formats? Enlarging seems to be okay, adding a black bg and setting layer mode to overlay also seems to have worked, but as I am aiming at selling my photos, I want to be 100% sure I deliver a good enough product!
View 1 Replies View RelatedI am trying to burn multiple copies of a video I have produced. In the final screen to create a disk there is an option to choose multiple copies. I always select multiple copies and it burns the first one perfectly, the burner drawer opens and it asks me to provide another disk. When I do so I get the error: "Does not support burning of DVD-Video on Empty disc. Supports burning on DVD-R/DVD-R DL/DVD-RW/DVD+R DL/DVD+RW disc. Please insert another disc to continue, or click Cancel to stop the process."
The disk burner is a ASUS BW-12D1S-U.
This is quite frustrating as I seem to have to cancel each time and ask it to generate another disc, which I suspect is a longer process then just making multiple copies.
I have been using corel video studio pro x4 for about 6 months for uploading videos to youtube. Works just fine. I have now edited and composed a 50 minute video that I have tried to burn onto dvd+r and when the finished product is played it starts out just fine and in time. Minute by minute though the audio starts to lag away from the video being displayed to where at the end of my 50 minute dvd it is off by more than 5 seconds.
View 1 Replies View RelatedI have an HP Pavilion dv7 laptop with preinstalled PS Photo Pro X3, so no CD/DVD. I need to reformat my hard drive to make it dual boot Win/Mac but I would then like to reinstall PSP X3. Is it possible to create installable CDs/DVDs from the preinstalled (or downloaded?) version? If it's not possible, am I entitled to CDs/DVDs from Corel, or can I download and use my current serial number/registration info to activate the product?
View 3 Replies View RelatedI have one that should hold 8.5 gigs. Not sure if I should try it. I have a 2 hour interview I want to burn and it will not fit on a regular DVD.
I wonder if there is another setting that would reduce the size some without degrading the quality much.
When using a DVD/CD template to do a design to print onto a DVD/CD even though the template shows the circular shapes of both the outer circumfrance and the central hole etc if I paste a square design onto the circular template the design is not restricted to the printable area of the DVD. How do I achive a design that is just printed onto the printable are of the disk?
View 2 Replies View RelatedI'm in a real pickle: Bought a top shelf Sony V. Cam. In HD the format is AVCHD, which X5 Pro doesn't want to know. The Sony software,'Play Memory Home' only allows basic editing like trimming of clips. So I tried 'Batch Convert' and picked MPEG as target to edit my 1 hr 4 mins of Kruger Park wildlife, which entails hours of work. When I start on the disc burning procedure (or video file production) after several mins I get the 'The program encountered an unspecified error and will be closing down',
I have tried different output choices, like 'DVD" or 'AVCHD' at different compression,tried deselecting hard- and software acceleration etc, to no avail, same error every time, I get told to send the Dump file to Corel for analysis, fat lot that would do! If I started with a conversion to a different file system I would probably have to go through the editing again, sound, transitions and all?
Does Video Studio Pro X4 allow for the creation of DVDs with switchable sub-titles, ie giving the viewer the option to watch the movie with sub-titles (eg English sub-titles if another language is used in the movie) or without subtitles?
View 2 Replies View RelatedI have been using Video Studio Pro x2 for several years to edit and burn DVDs from the edited material with no problems. But for the last several months the burning process stops at the end of the VOB (whatever that is) but the blank disc is altered so it is unusable. It says that the Corel softwart has encountered a problem and has to close. I send a message every time but nothing comes of it. Another recurring problem is that it keeps telling me that the program will take a long time to burn even though I have checked the box to not show this message again.
The only way I have found to get the software to perform properly is to remove and reinstall the soft ware. Normal operation lasts for about four discs and the problem reoccurs. I have cleaned the hard drive of unnecessary files, etc. All my security updates are current.
I used this software on my previous two computers with no problems at all despite a much smaller Hard Drive, slower motherboard and much less memory.
Since I am unable to burn DVDs with my current computer drive I want to burn them on another computer using the VSProX4 software. Also the video quality of the DVD I burned on this computer is poor. What is the easiest way to burn them on another computer? Should I create DVD folders or create disc image or just copy the files in the Corel VSPro folder on Documents and transfer it to the new computer. I rendered a video file from my project and it is saved in my projects folder in documents.
View 14 Replies View RelatedI have hundreds of DVD disks that I want to Catalogue. I import the files using just the ADD function into a newly created collection, yet once he DVD is ejected the files loose their path. I thought that files from external media did not have to exist on a hard drive to be catalogued. I used Portfolio before this adventure into Lightroom and I had nop problem at all. I have studied tutorials and the only discussion within these lessons is about files on connected hard drives or RAID systems.
View 3 Replies View RelatedProjects do not finish burning to DVD. After I have finished editing my video I try to create disc using DVD format. Project completes video rendering but doesn¡¦t complete writing to disc. It stops half way. Then a message pops up saying ¡§The burner is busy for another application.¡¨ I press ok and another message comes up: ¡§The drive is busy or is being used by other applications. Please make sure the drive is ready, close all applications that may be using the drive (including folder windows), and try again. [534:-2147216300:0]¡¨
Drive: External drive Samsung SE-S204S USB CDDVDW
Video Studio 11 Plus
I have made sure no applications are open and the drive works fine with other software. I have included Print Screen shots of when I encounter the problem.
I'm using VideoStudio proX5. Previous versions of the VS program have allowed me to opt out of using a preset image template for the menu pages and instead to choose a background image of my own to put behind page headings and video thumbnails or text titles. I can't see how to do this in VSproX5. Any background image I introduce is always partly covered by unwanted areas of template and the right-click menus won't let me delete or move them to the back. I just want a plain uniform background and to be able to choose the coolur.
View 4 Replies View Related