When using a DVD/CD template to do a design to print onto a DVD/CD even though the template shows the circular shapes of both the outer circumfrance and the central hole etc if I paste a square design onto the circular template the design is not restricted to the printable area of the DVD. How do I achive a design that is just printed onto the printable are of the disk?
View 2 RepliesI was wondering if I need to "trap" all 3 layers of color in this design which will be screen-printed as a 16x20 sized poster. In some parts of the design, I purposely made the colors a bit offset. But the printer says I must use trapping. I watched a bunch of video tutorials, but none of them seem applicable to this particular kind of artwork, in which I WANT some of the background/paper to show through. But not everywhere. I work in Illustrator CS6.
View 4 Replies View Relatedi'm doing a layout in ps and there are some images, do i have to flatten it before printing and what is the best extension file name to have a quality print??? (psd.tiff.jpg)
View 2 Replies View RelatedMy Video Studio X5 refuses to create DVD's.
The system runs fine apart from that. When I go to Share, Create Disc, DVD, then check Create Disc, Create DVD Folders, Create Disc Image, Normalize Audio, Delete Temporary Files in Working Folder. Then Click Burn, everything proceeds as normal until both progress bars reach 99%, then I get the following message " Unspecified Error -- 5.0.0".
Nothing gets transferred to disc. This is the same for all projects. I have already tried re-installing VS X5. Nothing seems to make any difference.
I have a version of VideoStudio Pro X3 that came pre-installed on an HP computer. It tends to crash, but I can muddle thru to the point where I can save a project as a video file. Once that step is done, there is no option, not even a greyed out button, that allows me to burn a DVD. The saved file is there, just can't do anything with it. Been thru the process and the instructions several times, the option to burn disks seems to be missing. Is this some sort of trial version, maybe stripped down? The option to export to portable device is also limited to low res WMV, no MP4, 3g2, etc.
I tried to run an update, but the program comes back stating that no new updates are available.
I have been using Ulead VS 11+ for some time with great results. I recently upgraded to Corel VideoStudio Pro X3. The video capturing and editing works flawlessly however when I then want to burn the video to DVD by selecting the “share” tab and make disk it seems to start up DVD Factory which I find totally lame compared to the DVD burning associated with SV11. There seems to be no advanced functions accessible, I can’t seem to insert a photo into the back ground of the menu title, I can't create new decorations to create new back grounds for my title, I can’t burn the project to an .iso file etc. etc. In addition if you save the project and then come back to it later it does not pick up you saved project, and it does not indicate where it has saved to project. Am I missing something here. At the moment I edit in SV ProX3 and burn in VS11.
View 6 Replies View RelatedI am trying to burn multiple copies of a video I have produced. In the final screen to create a disk there is an option to choose multiple copies. I always select multiple copies and it burns the first one perfectly, the burner drawer opens and it asks me to provide another disk. When I do so I get the error: "Does not support burning of DVD-Video on Empty disc. Supports burning on DVD-R/DVD-R DL/DVD-RW/DVD+R DL/DVD+RW disc. Please insert another disc to continue, or click Cancel to stop the process."
The disk burner is a ASUS BW-12D1S-U.
This is quite frustrating as I seem to have to cancel each time and ask it to generate another disc, which I suspect is a longer process then just making multiple copies.
I have been using corel video studio pro x4 for about 6 months for uploading videos to youtube. Works just fine. I have now edited and composed a 50 minute video that I have tried to burn onto dvd+r and when the finished product is played it starts out just fine and in time. Minute by minute though the audio starts to lag away from the video being displayed to where at the end of my 50 minute dvd it is off by more than 5 seconds.
View 1 Replies View RelatedI have an HP Pavilion dv7 laptop with preinstalled PS Photo Pro X3, so no CD/DVD. I need to reformat my hard drive to make it dual boot Win/Mac but I would then like to reinstall PSP X3. Is it possible to create installable CDs/DVDs from the preinstalled (or downloaded?) version? If it's not possible, am I entitled to CDs/DVDs from Corel, or can I download and use my current serial number/registration info to activate the product?
View 3 Replies View RelatedI have one that should hold 8.5 gigs. Not sure if I should try it. I have a 2 hour interview I want to burn and it will not fit on a regular DVD.
I wonder if there is another setting that would reduce the size some without degrading the quality much.
I'm in a real pickle: Bought a top shelf Sony V. Cam. In HD the format is AVCHD, which X5 Pro doesn't want to know. The Sony software,'Play Memory Home' only allows basic editing like trimming of clips. So I tried 'Batch Convert' and picked MPEG as target to edit my 1 hr 4 mins of Kruger Park wildlife, which entails hours of work. When I start on the disc burning procedure (or video file production) after several mins I get the 'The program encountered an unspecified error and will be closing down',
I have tried different output choices, like 'DVD" or 'AVCHD' at different compression,tried deselecting hard- and software acceleration etc, to no avail, same error every time, I get told to send the Dump file to Corel for analysis, fat lot that would do! If I started with a conversion to a different file system I would probably have to go through the editing again, sound, transitions and all?
Does Video Studio Pro X4 allow for the creation of DVDs with switchable sub-titles, ie giving the viewer the option to watch the movie with sub-titles (eg English sub-titles if another language is used in the movie) or without subtitles?
View 2 Replies View RelatedI have been using Video Studio Pro x2 for several years to edit and burn DVDs from the edited material with no problems. But for the last several months the burning process stops at the end of the VOB (whatever that is) but the blank disc is altered so it is unusable. It says that the Corel softwart has encountered a problem and has to close. I send a message every time but nothing comes of it. Another recurring problem is that it keeps telling me that the program will take a long time to burn even though I have checked the box to not show this message again.
The only way I have found to get the software to perform properly is to remove and reinstall the soft ware. Normal operation lasts for about four discs and the problem reoccurs. I have cleaned the hard drive of unnecessary files, etc. All my security updates are current.
I used this software on my previous two computers with no problems at all despite a much smaller Hard Drive, slower motherboard and much less memory.
Since I am unable to burn DVDs with my current computer drive I want to burn them on another computer using the VSProX4 software. Also the video quality of the DVD I burned on this computer is poor. What is the easiest way to burn them on another computer? Should I create DVD folders or create disc image or just copy the files in the Corel VSPro folder on Documents and transfer it to the new computer. I rendered a video file from my project and it is saved in my projects folder in documents.
View 14 Replies View RelatedI have hundreds of DVD disks that I want to Catalogue. I import the files using just the ADD function into a newly created collection, yet once he DVD is ejected the files loose their path. I thought that files from external media did not have to exist on a hard drive to be catalogued. I used Portfolio before this adventure into Lightroom and I had nop problem at all. I have studied tutorials and the only discussion within these lessons is about files on connected hard drives or RAID systems.
View 3 Replies View RelatedProjects do not finish burning to DVD. After I have finished editing my video I try to create disc using DVD format. Project completes video rendering but doesn¡¦t complete writing to disc. It stops half way. Then a message pops up saying ¡§The burner is busy for another application.¡¨ I press ok and another message comes up: ¡§The drive is busy or is being used by other applications. Please make sure the drive is ready, close all applications that may be using the drive (including folder windows), and try again. [534:-2147216300:0]¡¨
Drive: External drive Samsung SE-S204S USB CDDVDW
Video Studio 11 Plus
I have made sure no applications are open and the drive works fine with other software. I have included Print Screen shots of when I encounter the problem.
I'm using VideoStudio proX5. Previous versions of the VS program have allowed me to opt out of using a preset image template for the menu pages and instead to choose a background image of my own to put behind page headings and video thumbnails or text titles. I can't see how to do this in VSproX5. Any background image I introduce is always partly covered by unwanted areas of template and the right-click menus won't let me delete or move them to the back. I just want a plain uniform background and to be able to choose the coolur.
View 4 Replies View RelatedAccording to DVD Decrypter my DVD burner LG's HL-DT-ST DVDRAM GSA-H10N can burn dual layer discs of the type +R (not -R) with a capacity of 8.5 Gb. Is this possible with Ulead VideoStudio 10, or is more modern software required?
View 7 Replies View RelatedI am trying to transfer 8mm tapes to my computer to make DVD's. I bought a "Startech S-Video / Composite to USB Video Capture Cable w/ TWAIN and Mac® Support" so that I could use any software w/it. I thought I could use Microsoft Movie Maker, but it doesn't work. So, I got VideoStudio Essentials X4 with the capture device. All my tapes are fine, and they play fine with I'm capturing...but when I go to view the video, it's jumpy. I only did a few minutes to see how it would do and that's where I hit a wall. I've emailed with Corel support for almost 2 months to find out that they don't support the software I got. As a last resort, he asked that I download the free version of VideoStudio Pro X4. I did, and still the same thing happens.
View 14 Replies View RelatedI have been using VS X5 to create DVDs and ISOs from MPEG2 clips that are 30-60 minutes in length, so I end up with one clip per DVD. Now I'm in the process of taking approx. 60 MPEG2 clips, which were originally VHS and VHS-C movies of my kids at various events, and creating 60 minute DVDs and/or ISOs. The MPEG2 clips range in length from 2 to 20 min. When creating the DVDs/ISOs, I want to include the who, where, and when information prior to the video clip. My current thought is to create a timeline in the following format: Title1, Clip1, Title2, Clip2, etc. I would add chapter markers at the start of each title. Once I have approx. 60 minutes on a timeline I would create menus and DVDs/ISOs.
I create a movie file from each MPEG2 that includes content info and use these movie files when creating the DVD/ISO.
Im editing my home dvds that i have imported to my hard drive, now using VideoStudio x4 to crop them into the right clips and adding text,
So far ive managed after some reading to set the in and out points, drag it to the time line, then add text... I had a bit of trouble finding out how to save it, but i think im right in clicking "3 share" and then "create video file" to save the clip ?
Once ive done this what is the best format to save the clip as? baring in mind once i have all my clips cropped with text at the beginning, im hoping to burn them all to a DVD, and add menus... Is the menus also something that can be done on Video studio?
I am going to designig outlines icons for web design purposes in Illustrator. Struggling with shape. I need perfect racatngle rounded egdes shape (4 edges) I am using guides to make it perfect but pen tool I use for it is not snaping to these guides, how to snap it? I tried:
Snad to Point
Snap to grid
Smart guides
How do you piut a design into repeat?
View 3 Replies View RelatedAre there any tutorials (a video, or with images) or any good book or readings on how to create a package design (packaging) with illustrator from start to finish? (From the beginning creating the dielines to the end product of a finished package, mockup examples.)
I'm using cs 4 and cs 5.5
I want the words and the man to be the plaid pattern instead of the solid black. Any clue how i do that?
View 3 Replies View RelatedHow I can create "string art design" in AI CS6 with "Blend" technique? I did it accidentally [with line and a point] and can't remember how did that!
Like this link: [URL] .....
I needed to design hebrew text so I just down loaded Illustrator cc. But I don't have the "middle eastern composer" in my illustrator. How can I get that? I looked illustrator instruction manual. It wasn't same as my illustrator cc. And feel so stressful now. How come adobe's manual is different than what I have.
View 2 Replies View RelatedI am fairly new to Illustrator, although since I'm pretty good at Photoshop (I have used it exclusively for graphic design for 10 years) I have been picking up Illustrator fairly quickly. I created a design but would like to put a white stroke on everything so that it will look good on both dark and light colored shirts, but I can't figure out how to do this. It's SO simple in Photoshop, but I need the vector capabilities of Illustrator more and more these days so I really need to learn how in Illustrator.
All of my objects are in separate layers so I have tried to combine them and merge them to create a new stroke around them but all this does is group them and still create new strokes on each individual object. How do I literally MERGE them as they are (front object stays in front, back object stays in back, and they retain their coloring) so that I can put a white stroke around them?
I'm having an issue with the save feature in Illustrator CS5.5 (15.1.0 for mac). Typically when making changes to design files, we will save the Illustrator file first, then save as a PDF proof to send to the client. Our issue is that the file appears to save correctly, but when opening the Illustrator document a few days later, we find that only SOME of the changes were saved. Now keep in mind that I've only saved the document once, why would only a few changes save from one single save point?
On top of this, our PDFs come out without any problems, and all changes save just fine.
This is a major issue for us, as we need to be able to trust that ALL previous changes save, as we use the Illustrator document to create subsequent versions. We don't have the time to check through every minute detail to make sure that the file saved properly. This should be a very basic function of the program, yet it is creating big time headaches for us.
Could it be that we are saving as PDF first, then as AI? Would that somehow affect the ability of Illustrator to save properly?
In search of a program that would allow me to design and print paper forms. I've been asking around at various forums within Adobe and elsewhere, and have been able to eliminate softwares, but have yet to find any that I could actually utilize.
View 10 Replies View RelatedI'm new to Inventor. I'm currently having trouble transferring a design from Illustrator into Inventor. My process goes like this: In illustrator I export it as a .dwg. Then in Inventor I create a 2D sketch and click the ACAD button to import it. It works, but not in the way that I want. Only the outline shows up. I want a solid face that I can extrude and work with.
View 6 Replies View Related