Photoshop :: How To View 16-bit RGB Information?
Jul 23, 2009
I'm using Photoshop CS4 v. 11.0. I open a .tif which is 16-bit RGB. Photoshop recognizes it as 16-bit. The tab over the picture says RGB/16*. (I don't understand the asterisk) Image>Mode confirms that it is 16 Bits/Channel.However the info panel only shows the 8-bit RGB values (0,255). The panel options do not include a bit depth selection. How can I see the RGB values, perhaps (0,32767), in the .tif image using Photoshop?
View 3 Replies
ADVERTISEMENT
Feb 8, 2012
I didn't see any way to view technical information about the currently open image. Is there such a dialog, and if not, can you add it to the next version ? Would really come in handy, especially if you can additionally add complete EXIF data viewing/editing support in the same properties dialog. If this latter bit is too much, even a basic dialog displaying the image properties would be very nice indeed.
View 10 Replies
View Related
Sep 3, 2011
I am learning Corel’s PSPPX3 by reading Diane Koers’ book titled “Picture Yourself Learning Corel PSPPX3.”
According to Diane, in Organizer View, a General Information Panel should be displayed on the right.
My view does not display the panel.
View 1 Replies
View Related
Mar 17, 2013
IF it is possible to display the alignment/profile position (X, Y, Z) on each section view?
Refer attached for example.
View 1 Replies
View Related
Aug 26, 2011
I am a AutoCad drafter for telecommunications and I have utility pole points (long/lats)
I can insert the poles via long/lat and all is great, my issue is I would like more information in those points.
For example, pole number, class, HOA, Make Ready. Currently I create a survey data store and import ASCII Points using PNE(comma delimited)
So with my Excel file (this is where I get my pole information from) I get a point/northing/easting to enter into the formatting section.
I would like to add more information to these individual points, like ploe number, class, HOA...
If I view the point table I see that there are a lot of other columns, can I use them or customize them? is there a quick tutorial on this issue?
View 4 Replies
View Related
Aug 23, 2013
How can I get the Lab colour information not only of a single pixel, but of a wider range like a circle of 1 mm in diameter, for example?
View 2 Replies
View Related
Aug 16, 2013
I'm currently using "image processor" to convert all my psd file to jpg at one shot. My question how can I bulky convert from psd to jpg and get rid of all the picture information, like what camera was used etc.
View 1 Replies
View Related
May 5, 2009
our user got a error when start Photoshop CS, it show "Could not complete your request because of missing or invalid personlization information"
Does anyone know how to solve this problem?
View 3 Replies
View Related
Sep 13, 2008
In order to save hard-drive disk space I want/need to start compressing my Photoshop files. The Tiff-LZW or Tiff-ZIP compressions seems like a great lossless format alternative with apparent significant compression. Is anyone aware whether there is truly no loss of file information with these formats, or does some minimal degradation occur? Any thoughts on JPEG2000 lossless compression?
View 5 Replies
View Related
Oct 10, 2013
how to save copyright information into Gif files
View 1 Replies
View Related
Jun 28, 2013
Since I've updated to Photoshop CC, something has changed in the way the information and data fields display in menus and windows to where I can't see them fully or can't see what I'm entering into them. See the image below for reference.
This is happening to Photoshop CC (both standard and 64-bit version) and somehow has applied this to my CS6 versions of Photoshop. I've updated my other programs to CC (Illustration and InDesign) and don't have this issue. They are working fine.
I've done the following to correct the issue, but have not been able to resolve the issue:
- shut down and restart computer
- change image resolution for my monitor
View 1 Replies
View Related
Mar 4, 2013
I've been having this problem ever since I installed Photoshop CS5 (12.0.4) on a Windows 7 64-bit machine. I've used the program on a Windows Vista 64-bit PC in the past with no problems.
Any color that has zero red information will turn black when in RGB mode and in either 8 or 16-bit mode. If I use the paintbrush, for example, a color with RGB 0/100/100 will be black. However, the color 1/100/100 will not. This problem also occurs with imported images. I've only tried JPEG and PNG so far. The problem does not save out though, as any image exported from Photoshop will appear fine. The issue seems to go away when in 32-bit mode, but it's a little RAM-intensive, and the file sizes are quite large.
I have reinstalled Photoshop, reset its preferences, and reinstalled my video card's drivers (I have a Radeon HD 7870). My PC has 8 GB of RAM and plenty of free hard drive space.Below is a screencap of what's going on.
View 1 Replies
View Related
May 7, 2013
I edit my raw files in CS5. Then I saw as JPEG, and upload to be developed. Once the pictures are uploaded they look like I never edited them at all. What am I doing wrong. This does not happen if I edit a JPEG file.
View 1 Replies
View Related
Nov 20, 2013
I downloaded a resume & cover letter template and I am not able to figure out how to delete information and modify existing information to customize these documents.
View 2 Replies
View Related
Mar 25, 2013
have approx 500 Windows 7 64bit machines with about 600/700 users - 200 machines have the CS5.5 Master Collection installed on them. We have an intermittent issue with printing from Photoshop (both the 32bit and 64bit versions). Our printers are mostly HP LaserJet printers (all modern), but we have an Epson B-510DN Inkjet and some Xerox copiers too. The drivers are all installed on a central print server running Server 2008 R2 and shared via Group Policy to client machines.
In rooms where Photoshop is installed, intermittently when a student goes to print we will recieve the following error:The saved printer information is not compatible with this version of Photoshop, or the saved printer is no longer available. You will need to check your printer settings before printing.Photoshop will then grey out the 'Print' button and won't let the user print again. The odd thing is that we can still print from other software such as Microsoft Word or even non Microsoft software - even Illustrator will print. It just seems to be Photoshop thats has any issues.
This happens when printing to any printer on site, 90% of which are HP's. As a general rule we configure all of our HP printers with HP's PCL6 Universal Print Driver as it makes management of various printer models easy, and we haven't found it to limit us atall yet. We are aware the Adobe software is 'preferential' to Postscript drivers but our printers arn't, being HP's PCL is their native language. We have tried changing a printer to the Postscript UPD driver to test it but it made no improvement. We have also seen the issue quite indepth with our Epson B-510DN which is configured with Epson's latest model specific driver as our photography department use it. Since we are seeing it with different printers I don't believe the printer drivers are to blame.
Like I say the problem is intermittent, and we are having trouble tracing it down to a user, computer or a software problem as it is so intermittent. Since it's only happening in Photoshop is it a bug that Adobe have recognosed and fixed in CS6? The only workaround we have found for it is to go into printers, chnage the defualt printer from one to another and back again - this seems to shut Photoshop up.
View 5 Replies
View Related
Feb 21, 2013
The saved printer information is not compatible with this version of Photoshop.
View 11 Replies
View Related
Apr 14, 2009
When I upload jpg files that have been saved in photoshop CS3 to my account on Flickr, an excessive amount of information appears in the exif data. In particular, there is a list of every time that I have edited and saved the file. How can I eliminate this information?
View 2 Replies
View Related
Jun 5, 2003
how do I make a page and then roll the top adn bottom so it looks curled toward the center.. tryin to make a scroll effect and place information on it......
View 2 Replies
View Related
Mar 5, 2006
way to copy the slices/slice information from one psd to another. In other words, to copy the slices from image1 to image2 - using imageready or photoshop. I've tried several ways but can't figure out how to do this.
View 2 Replies
View Related
Nov 27, 2012
I want to use Photoshop Elements (2002) to add typed information onto pdf forms like I do in PS CS
View 2 Replies
View Related
Jun 21, 2012
I'm trying to extract the channel information from a .psd file in binary mode. I'm able to extract the number of channels and their names, but not their types (I mean if it's a spot color channel or a mask). The documentation I've found is from 1997 and some things are not the same with the newest versions.
View 9 Replies
View Related
Oct 18, 2012
If you type some text on a curved path is there a way to find out each letters rotation in degrees? Maybe in Illustrator? Any known scripts? Besides individually adding letters then rotation them to the background curved text layer.
View 2 Replies
View Related
Dec 13, 2012
I have gone around and around with Photoshop/Creative Cloud getting my activation working. After more than two weeks that problem is finally solved. BUT during this time I got a popup during the launch of Photoshop CS6 asking if I wanted to 'automatically send information to Adobe for product improvement' or something like that.
If I clicked "No" the top menu bar would appear, but every single option was greyed out. The program just sat there, useless. So, out of desperation (to continue my troubleshooting) I clicked "Yes". The program worked. How can I turn this off?
View 7 Replies
View Related
Nov 6, 2012
A friend asked me how to create a base template for metadata information (file/info/description). The basic info is my name, address, copywrite, etc. I had created this on a previous version of Photoshop and was able to migrate it to PS6. However, in trying to answer his question, I have lost my own template. How to recreate this.
View 2 Replies
View Related
Jun 8, 2007
I like grayscale photos, but I don't want to lose the color informations of my layers, because maybe later I want the colors back.
Is there a mode or plugin or something in Photoshop, that lets me display all layers in B/W mode but without having to lose the color information?
View 2 Replies
View Related
Apr 19, 2007
I'm taking some photos for my portfolio, when I'm done tweaking them in PS, I go up to the title bar of the document>right-click>File Info, then I'll add my necessary info.
Rather than doing this every time, I remember reading or watching a tutorial years ago about importing copyright info automatically into the photo's "File Info".......
Does anyone know about this? Cause I don't remember how the heck to do it!
View 3 Replies
View Related
Sep 30, 2013
Since I capture my images in RAW, when I open them in Adobe Camera RAW (via Elements 11), what information is displayed in the image and the histogram I see?
Is it showing me the jpeg created in the camera? If so, the jpeg settings in my camera are not only important in viewing the LCD and the histogram in my camera at the time of capture. They would also be important in viewing my image when it first opens in Adobe Camera RAW.
View 4 Replies
View Related
Feb 17, 2014
I have 26,000 images on an external drive (currently designated drive M), almost all tagged and/or rated and indexed in two PSE 11 catalogs on the main PC hard drive. I am just about to replace my PC. I assume that when I connect my external drive to the new PC, it is unlikely to be Drive M. How do I maintain access through the catalogs with all the stored information?
View 2 Replies
View Related
Mar 25, 2013
It was necessary to reload Windows 7. This eliminated all programs (i.e. Elements 10). I reloaded Elemensts 10 but had lost all catalog, category, and subcategory information. My photographs (3,000) had been saved but not "backed-up" (I did not realize there was a difference). All photographs are intact with tags (but not catalog information). Is there some way to restore the catalog and category data?
View 4 Replies
View Related
Aug 29, 2013
I was planing to use an external HD to keep all my photos and being able to work on different computer (in different places) where I have Elements already installed.
How can I connect (synch) these different Elements to the external HD where i keep my Pictures?
If I use backup/restore i would need a copy of my pictures on each computer I use and that is not what i want. What i want is to use the same catalog and pictures when i move form one PC to another.
View 6 Replies
View Related
Jul 19, 2013
Is it possible to create a custom keyboard shortcut to Reset View in the Rotate View Tool?
View 1 Replies
View Related
