how do i move the object i selected with magic wand to another layer in a different page like i tried but when i tried it didn't let me instead it didn't even move the other layer look for yourself.
[URL].........
I tried doing the same thing this guy did in this video
[URL].........
Skip the video all the way to 1:25 where he moves the object.
If I drag an effect from the target circle of one object to anther in the layer's panel it replaces the effect along with all appearance. But I want just to add the effect. For example, a layer has a drop shadow and a path, round corners. I want to move the drop shadow from the layer to the path so that the path now has the round corners and the drop shadow. To do this I have to open the shadow effect of the layer wright down its parameters, then create a shadow effect for the path with the same parameters which is a lot of work.
View 3 Replies View Relatedwhere I can't use the move tool with the mouse properly. I'll go and select a single item on a layer and then try to move it with the mouse (move tool). I've done this before and still do it all the time on Photoshop on my other machines. However, on my laptop it won't work. I grab the single object I want to move and the second I move it, it defaults to moving every single layer in my file.
View 3 Replies View RelatedI often have an issue when trying to move an object on a layer crowded zone.
I select the right layer through the layer dock. But when I try to move my object, some auto selecter is probably ON and it selects another layer (that probably was right under my mouse) Any way I could disable that ?
When I used to use photoshop that was an easy obvious option "AutoSelect Layer" I don't get it how to do this in gimp
I try to select and move a layer using the Move Tool, another layer is immediately selected and moved instead.
Also, if I have layers inside a folder and try to move one of those layers, the entire folder is selected and all layers within that folder move.
I have not grouped any layers together.
I'm using Mac OS 10.4.8 with PS 9.0.1
I am using the trial version of CS5 (probably going to upgrade at the end of the trial), and I've only found one thing about it that I don't like more than CS3. This is VERY VERY annoying, and I'm not sure if it's a glitch, or just a preference that needs to be reset:
When using the move tool, I will move something and it will just snap back to where it originally was. When it snaps back, it might move a few pixels over in the direction I was dragging, but it is definitely not moving to where I want it to go. The only way to get things to move the way I want to is by Free Transform...but it's annoying, when you're trying to design a layout, to have to free transform every element you want to move, first.
I'm guessing that this is a glitch because sometimes it happens and sometimes it doesn't...it's pretty random. I've tried turning Snap on and off, and nothing changes.
What happened to the option/enter command in the move object dialog that has been around since the early days of Illustrator??? Instead of having to mouse click the "copy" button in the move object window, one could just hold down option with Return or Enter and the Copy command would happen rather than a simple move. Immensely useful for prepress work!
View 2 Replies View RelatedI could have sworn that in previous versions of Photoshop, before version CS4, that if there was a link icon between the layer thumbnail and the layer mask on that same layer, if you move one or the other, they both move. In CS4, how do you move the layer pixels and the layer mask at the same time so that they stay lined up?
View 9 Replies View RelatedI'm want to drag an objects anchor and have the position co-ordinates offset by opposite amounts so it doesn't appear to move postioin on screen. IS there a tool for that?
View 3 Replies View RelatedSay I have 2 items, one is on layer "M-Duct" and the other on "M-Pipe" (they are in the same drawing). Any lisp routine that would create the layers "M-Duct-New" and "M-Pipe-New" (based on the same color and LT as the original layers) and then move those objects to the newly created layers?
View 9 Replies View RelatedOS: Windows 7 64bit Ps: Cs6
Is there a way I can move an object 1/2 pixel? Is there a modify key that I can use along with the arrow keys or something like that?
I am trying to change this to win50k from Zip-P..I need to move the lightning bolt over..layer # 18..but I cannot grab and move the object with the hand tool..The help does not offer a simple answer to a very basic operation. Just want to move the lighting bolt to the right a bit..yes I think something this simple should be idot proof - and work like powerpoint...or the tool is too complex in my book...
View 5 Replies View RelatedIn Transform controls I have write exact distance X: 1240.00 pixels (1. Picture)When I click ok, the object remains in its previous location by the guide .1240 .50 pixels (2. Picture). URL....
View 6 Replies View RelatedWhen using adaptive wide angle on a smart object, the smart object mask does not change while the image does.
This results in a double image where the mask doesn't fit the new image. How do we get the mask to change with the image?
Masking after AWA is no better. This is equivalent problem with lens correction.
I've tried AWA on the mask, no luck. Sure I can dupe the layer & rasterize and mask, etc., but I dont want a bunch of extra layers and MB.
I am trying to make a photo where I am taking an object from one photo and placing it in another. Is Elements 12 incapable of doing that?
View 2 Replies View Relatedlisp..It work fine but just that i need some minor modificatio to it...At moment, when i activate the lisp, it will automatic select all dimension,leader and multileader to a layer call "DIMENSION"...Anyway i wonder if it is possible to prevent any dimension,leader or multileader in layer "Section" will not be change to layer "Dimension"?
View 2 Replies View Relatedthere's an invisible 10px border around each object/shape. it's so frustrating when i'm working on small icons or whatnot.i'll try and give an example the best i can... say i have two squares overlapping and are offset from each other by a 5px or so. if i want to select the back square, i'd normally... click on the part of the square i can see. in cs6, if i just click on the visible part of said square, it would select the front square. i have to click at least 10px out from the back square to select it.
View 10 Replies View RelatedLevel: Newbie OS: Windows 7 64bit Ps: Cs6
So, I have a layer which I made a rounded rectangle and then used ctrl + alt + t to transform and set it to 30 degrees and used alt + drag on the transformation pivot point
then I used ctrl + alt + shift + t to duplicate the rounded rectangle around that point and then ... I relocated this layer above an other layer w/a circle on it and used ctrl + alt + g to create a clipping mask
Now ... is where I am stuck ...
I'm suppose to "split each path into a separate layer" .... um. what?
Okay, I realize that each of the rounded rectangles has its own path ... but how to go about putting each one on a separate layer and I cannot find it in the manual
I was successful in following tutorial instructions to move one file into another, but one day later, I cannot drag a new file from the active window into another file. Have I inadvertently changed some setting?
View 2 Replies View Relatedhow can you automate the process so that photoshop always moves the layer to a certain coordiante i.e. to point X:1424 Y:2370 and not move them relatively i.e X: -372 Y: +124 but always places them to that same certain point.
View 2 Replies View RelatedI'm trying to line up two images one on top of the other with opacity set so I can see both.in Liquefy (CS4). One is background, the other is Layer 1. How do I move either one roughly in place over the other so I can start adjusting edges so the two profiles match? Hand doesn't move anything.
View 4 Replies View RelatedIf I drop a layer so that part of it is off the canvas, the layer will move back to the place that i dragged it from.
Is there any way to move a layer so that part of it is outside of the canvas?
After creating a duplicate layer of a stroke, I then click the thumbnail of an existing layer (where I want to move the copied layer to) while holding the control key, I see the image with marching ants border, and attempt the move the copied layer. I get the following message ' the request could not be completed because the sourse and the destination documents are the same.
View 7 Replies View RelatedCan one move one layer relative to another in Elements 11?
View 1 Replies View RelatedSometimes it works. Lately it rarely does. I have tried holding the command key and this does nothing. Why can I not move objects anymore.
View 3 Replies View RelatedRecently upgraded from CS2 --> CS5 in windows. This issue started with that upgrade. Been using PS for years.In my large PSD files I use folders to logically-group layers. With CS5, when I put layers into a folder, it automatically groups the layers (not links, groups). When trying to move the contents on ONE LAYER in a folder (using the mouse).... it moves ALL the layers in the folder.
If I use the keyboard ARROW keys, I can move the contents of one layer in a folder independently of the other layers in the folder.I have not explicitly asked PS to group or link ANYTHING in my file. The default seems to be to GROUP layers in a folder. It did not used to be this way.
If I UNGROUP the layers in the folder, it deletes the folder and the layers are now all at the root level. I lose my organization.The only way to get around this is either:
(1) leave the folder grouped and use the keyboard arrow keys to move the contents on one layer (way too cumber some), or
(2) MOVE the layer out of the folder, move the contents of it, then move the layer back into the folder.
I'm having an issue trying to move the camera view in cs6 extended using a 3d Layer. Here's the idea:
1. Create a 3D Layer extrusion / mesh primitive.
2. I select the current view item in 3D Panel / click outside model.
3. The border frame appears yellow.
4. When I select the Move tool, I can only rotate around the y axis, can't rotate up or down. Can't roll the camera, move or slide either using the other move tool modes.
5. I can adjust the co-ordinates properties for the current view and it works OK.
6. Object /light transforms work OK.
I'm testing on 13.0.1, mac 10.7.4. I had the same problem on another machine on 10.6.8 on v 13.0 last week that fixed itself, but not sure how .
I am using Creative Suite 5.5 on my MacBook Pro...and today had issues demonstrating the simple process of dragging one person/image onto another, applying a quick mask to do some simple morphing.
But...one, I couldn't drag the image from the internet and drop onto the project, but had to go to Edit and copy, then create a new file and hit paste. Placing one image side by side to another...I was not able to drag the image of one person to drop onto the other. I either had to use the marquee tool, drag around the image, copy and paste or...found I could drag the image from its layer in the layer's palette and drop onto the project.
More frustrating was that once I had both images in the same project, I was not able to move the new person/image added to locate in right position over the background person/image. I would drag it to that new location, and it would snap back to the original location. Obviously the need to take any image added and move it around to orchestrate your image is important.
I have asked a number of artist friends, checked the mode (both images are RGB) and both images at 8 bits...
I presume it is a simple command that will release the image to stay where located using the Move tool...but am not familiar enough with Suite 5.5 obviously.
I always paste an image on a layer then select the layer and use the Move Tool to move it around until it is placed where I want it. Now I paste the image, select the layer, choose the Move Tool and the layer selection jumps to another layer and that one gets moved. (CS5)?
View 5 Replies View RelatedWhen I attempt to use the move tool to move a layer, as I grab the object in that layer, the move tool suddenly switches to the highest most layer, not the layer I selected. I can't seem to change this and this only started happening recently.
View 2 Replies View RelatedSo I am adding a leaf to the waterfall image. The leaf is on it's own layer with a layer mask, and was moved into position without a problem. A drop shadow was added with Layer Styles, but when trying to move the layer again, the mask moved, but the layer stayed behind.
I checked for Auto select, which was off. I unlinked the mask, tested, relinked the mask, and tested again. Same problem. Eventually it started working OK after I tried moving with first the layer active, and then the mask active, and swapping this state about three times. I could not get it to misbehave again after this.
Nothing was locked. Auto select was off. Other layers all moved OK. I can find no explanation, and think of no user error (touch wood).