Photoshop :: How To Make A Picture With Only Outlines Visible
Sep 30, 2013I don't come out of that, how I can only the outlines visible.
View 2 RepliesI don't come out of that, how I can only the outlines visible.
View 2 RepliesI have a very specific problem. I've created a Lego instruction with MLCAD and LPub. Both programs work fine.
But when I have a couple of black bricks next to each other it is very difficult to see the outline of each individual brick. Here is an example:
You can see the full size image over here.
My question is: How can I make these thin white lines between the black bricks bigger? And when it is possible, can I do this using a batch process?
I'm playing with the 3D tools in Photoshop CS5 Extended for a friend. He provided an .obj file of a tool part and it opens just fine as a complex, shaded object.
Question: Is there a way to generate simple outlines of the object and export those outlines as paths to Illustrator?
I am trying to set up numbers to be able to cut on a vinyl plotter. I have created the numbers and put a stroke on them.
How could i be able to cut them when sent to the vinyl plotter.
This image shows the points that have the outline. I need to have these points moved to the outer edge.
i have installed CS6 on my vista PC /32 Bit, 4 GB RAM). Problem is, when i open an picture in CS6 this picture is not completely visible on main screen, rest on picture is greyed out. What can be the reason and what can i do?
View 4 Replies View RelatedIn liquify mode the picture is not visible at 100% magnification and above.It's perfect between 25 and 66%. If I turn the hardware acceleration off it works but slow. Doesn't work with PSD, jpeg, 8 or 16 bit. I did reset the PS. It had been working during the morning and stopped to work hours ago despite nothing happened: I haven't installed or removed any software. My PS is clean, I don't use any add-on or 3rd party filter. URL....
View 10 Replies View RelatedI'm trying to use Gimp to add a visible grid to a printed picture, so thatI can use it as a guide when painting a copy of the pic. I haven't beenable to figure out how from the documentation. There is a grid, and itshows on screen, but not when I print.
View 1 Replies View RelatedI am pretty new to Photoshop and I have come across a few things that I would love to do but I cant figure out how to do them. Also, I have elements so I'm not even sure if I can do them. Anyway one of the things I am trying to learn is how to put lines over an image. For example the very first picture on this site: ...
View 1 Replies View RelatedI am fairly new to more than the basic elements of photoshop. I am using 'Actions' to create a e-book cover and had my design created but when I pressed finalise iget the error box - The command Merge Visible is not available with two boxes continue or stop Clicking on either box produces no results.
My query how do I cure this please, I also notice that in the layer detail menu all but the background layer have disappeared. I have taken back steps and re-entered layers with the same result. Forgive my ignorance I am a silver haired surfer who was told it was easy to create e-book covers in photoshop.
What I want to do, is take the path tool, make a pattern around a picture (which is rectangle) placing it on a picture of a board like this...and then pull the picture horizontally, and vertically, to make it circular, to fit the perimeter of the board. If I understand it correctly, when you use the path tool...it allows you to make an image round (from rectangular) is that true?
View 1 Replies View RelatedWhen I use free transform, I lose the handles. Is there a way to make them visible?
View 2 Replies View RelatedI have a collection of vector images that I use when creating logos. However, there are invisible layers because there are so many layers. How do make these layers visible? I know in Fireworks that there was just a box that you clicked saying "show invisible layers."
View 2 Replies View RelatedHow does this person make picture 2, I want to know how he has edited it? I have spoken to my photographer and he thinks he has used a photoshop tool.
Please I really want to know, I can take the base picture easy but need to get the picture 2 "finish"
I have included 2 pictures, My picture is number 1 and picture 2 below is the one I am trying to look like, can you try and edit my picture 1 image to see if you can match picture 2?
I used a light box to take picture 1
I'm using Photoshop CC. After using a process known as frequency separation the stamp visible layer does not allow me to use any tools to make adjustments.
View 3 Replies View RelatedSo when you're zoomed out, you can see a grey background around your canvas. But when you're zoomed close enough, so that your canvas is bigger that your screen, you can't see that grey background, since the canvas become the borderline of your working space.
But is there a way to make that grey background visible even if i'm zoomed in?
Example: I'm drawing grass and I would like that my brush strokes begins outside of the box, while being zoomed in.
when i resize an image for example to 27 x 18 cm there is no problem however, when i try and print the image and the preview window comes up there seems to only be a tiny part of the picture visible? its basicly a tiny square in the top left corner of the preview page and its just big enough to see its a minute part of the image i want to print. If i try and print the image anyway i just get "could not start print job".I never had any issues before then suddenly a few weeks ago the problem happened in version x2 on any pictures i tried to resize and print , so i updated to x3 in the hope it would correct the error but its still there. Any setting somewhere , i tried using a trial version of a rival program and that worked fine and showed the print preview exactly how it should.
View 1 Replies View RelatedIf it is possible to hide a layer but make its effect remain visible. I cant make the layer all white, put the effect on it and then blend it with multiply because the background its transparent so it wont work .
P.D.: the effect im trying to do is an inner glow, I know I can do it manually but i was wondering if its possible to do that.
Mac user
On PE 9 there was a way to make the window (area within tool/layer/toolbar frame) transparent so the desktop would be visible. Can this be done for PE 11? The default is gray and I can't find any setting to make it transparent.
I load my .cuix file into Autocad 2013 using VB.Net:
Dim mg As ObjectTry mg = Application.MenuGroups.Item(cuiName)Catch ex As System.Exception mg = Application.MenuGroups.Load(cuiFile)End Try
File loading sucsessfuly, but my menu is invisible.
I tried do this, but got an error..
Dim i As Integer For i = 0 To mg.Menus.count - 1 mg.Menus.Item(i).Visible = True Next
How to make menu visible?
So whenever I open up Gimp and then a new image, the layer for the background don't show up. > [URL]..
I've this window with all the tabs for the brushes, patterns etc and when I want to make the layers visible, I've to drag the layers window to the tabs and then drag it back to where it first was.. (it's quite hard to explain )
[URL]....
so basically, the layers don't show unless i do something what can i do about this?
Basically, I'm trying to make simple animations. For some reason, I can't figure out how to make any layer but the top visible. Is there any way to essentially make the layers have a visible/invisible function? I'm not talking about the eye button next to the layer name.
View 1 Replies View RelatedI have just added a seond external drive to my Windows 7 computer. I can view the contents of my backup drive but I cannot see the new Seagate drive I just installed. I have read and searched but cannot figure out how to make the drive visible.
View 4 Replies View RelatedAttached is a test drawing
1. Why does my part not show up behind a surface?
2. What is the minimum dimension to make my part appear?
On the drawing I was working on, the part completly behind a surface was showing up until I rotated the view, then it dissapeared, this behaviour is not present in the test idw, the part doesnt appear at all behind the surface.
Moving right along with my Parametric Block programming tools. I have successfully created several linked parameters with formulas and values, and now I want to be able to show a select few of them in the Properties Palette (NOT Parameters Manager) for the inserted block ref. Taken from Stephen's example, here is my code for creating the AssocVariable (User Parameter)
Public Function AddOrModifyVariable(ByVal varName As String, ByVal varExpression As String, ByVal sourceObjectID As ObjectId, ByVal trans As Transaction) As ObjectId Dim db As Database = sourceObjectID.Database Dim varId As ObjectId = ObjectId.Null Using trans2 As Transaction = trans.TransactionManager.StartTransaction() ' Open the AssocNetwork Dim networkId As ObjectId = AssocNetwork.GetInstanceFromObject(sourceObjectID, True, True, "") Dim network As AssocNetwork = DirectCast(trans2.GetObject(networkId,
[code]...
I don't know if I need to create a dynamic block property (or if that can be done), or somehow get this AssocVariable to display on its own.I also noticed that the example for creating a parametric Dimension object, does not set the dimension to the right type of Dynamic dimension. (Play with the Constraint From property in the properties palette, be sure to regen in between).
When i hide an element in a particular view by rt click .- hide element. It does hide ..How do make it visible when required?
View 7 Replies View RelatedRevit 2012 .I have a topo file linked to the main building file.I am trying to render a 3d exterior view of the building (new construction ).I see the linked topography in black lines in my elevations.but not in the 3d view.
The question/ problem unsolved is how to get the site/ ground to be visible as per the linked topography in the 3d view of the main file . All I see is the building in the air , with a very light greyed site in a block form. I would like to see the site in earth: soil material for me to render the exterior view.
any way to view invisible block attribute? I created a block and the attributes really don't need to be seen in autocad just there for dataextraction and keeping it all in one location i want to go back through and make sure i have information filled in in all the right invisible attributes without having to open each block and check the attributes, but i don't want them permanently visible (i know i can freeze them or put them on a non plot layer but it clutters up the space when there is 20+ attributes to a block)
View 9 Replies View RelatedThere's this GIF that I'd like to use for a banner and when I open the file in GIMP, add a text and then check the animation in the playback window, I can only see the text once the GIF has ended but also, I can only see the text for like one second.
Is it possible to make the text visible on all of the frames of the GIF without having to duplicate the text 100s of times and merging them onto each frames?
I have two object intersect each other ,when i select one of the object the edges that in the intersect part is hidden! how can i make them visible?
I have this problem in autocad 2012, In autocad 2011 there was no problem.
I recently bought a Bamboo Pen tablet to use with GIMP and have been installing under Windows (XP).
The tablet installs fine, is recognised by GIMP and I can draw with the stylus. Excellent. The only problem is that the cursor/arrow is missing which means that I can draw things but I only know where the stylus is when I start to write/draw.
I am hoping that this is a simple settings issue but how to make the cursor/arrow visible?
How to make view cube visible on autocad 2010
View 3 Replies View Related