I recently bought a Bamboo Pen tablet to use with GIMP and have been installing under Windows (XP).
The tablet installs fine, is recognised by GIMP and I can draw with the stylus. Excellent. The only problem is that the cursor/arrow is missing which means that I can draw things but I only know where the stylus is when I start to write/draw.
I am hoping that this is a simple settings issue but how to make the cursor/arrow visible?
So whenever I open up Gimp and then a new image, the layer for the background don't show up. > [URL]..
I've this window with all the tabs for the brushes, patterns etc and when I want to make the layers visible, I've to drag the layers window to the tabs and then drag it back to where it first was.. (it's quite hard to explain )
[URL]....
so basically, the layers don't show unless i do something what can i do about this?
Basically, I'm trying to make simple animations. For some reason, I can't figure out how to make any layer but the top visible. Is there any way to essentially make the layers have a visible/invisible function? I'm not talking about the eye button next to the layer name.
View 1 Replies View RelatedThere's this GIF that I'd like to use for a banner and when I open the file in GIMP, add a text and then check the animation in the playback window, I can only see the text once the GIF has ended but also, I can only see the text for like one second.
Is it possible to make the text visible on all of the frames of the GIF without having to duplicate the text 100s of times and merging them onto each frames?
I have a problem with the cursor in 3DS max 2014. I am using windows 8 and when i hover over the empty spaces in the menus on the right, the cursor flickers between the arrow an the hand.
View 1 Replies View RelatedWhen painting with the paintbrush the cursor flickers between the round brush size cursor to an arrowhead. The paintbrush continues painting as it should, but the cursor flickers constantly between the 2. This is a visual annoyance but doesn't seem to affect performance.
I'm on Photoshop CS6 (latest updates) on 2008 Mac Pro 3,1 with OS X 10.6.8.
i don't have a normal cursor, which in my case is an arrow. instead i have what looks like three tiny hands in a row. this makes it very difficult to be accurate when cropping, or tilting. i uninstalled and reinstalled, to no avail. i'm using cs4 extended
View 4 Replies View RelatedWhen I'm working in an image, and in other places, the cursor is a horizontal series of symbols rather than the pointer arrow I'm used to in PSE 6, 10 and 11. The left side of the symbols is where the cursor is at.
I don't know what this is about, and don't care. I want the pointer arrow I'm used to. I've looked in Preferences but see nothing that applies. How do I replace these hard to use and irritating horizontal symbols with the pointer arrow?
How do I change my cursor from hand to arrow, it want let me select anything for editing?
View 1 Replies View RelatedI am a beginner and I think some thing is turned off but the do not know what, because you need this spacial cursor on screen to change values in the channel box but my own is not showing up.
View 1 Replies View RelatedI'm not new to lightroom. In every photo I go in to edit with the tools (any of them/all of them) my cursor only appears as the tool along the edge of my workspace. Once I move the cursor into about a half inch (on the computer screen) into the workspace my cursor becomes an arrow again, not allowing me to edit except for on the edges. I mean, I can drag the portion of the picture into the area in the workspace that allows my cursor to function as a tool, but this is not easy nor is it preferable in any way.
View 1 Replies View RelatedI am using a temporary computer, as mine is being re-formated.When I opened Illustrator to change a text-line in a picture, there was no cursor when I clicked on a word. I could still make my change, but no blinking cursor to tell me where I was.
how they thought at Adobe when they constructed the help-file as it is now... If I open the help-file in Illustrator, select that I want an answer for Illustrator (the icon to the right of the search-box) WHY do I get answers for InDesign, Bridge and other programs?WHY not just for Illustrator? I am NOT interested in those programs right now.
The cursor on Elements has changed from an arrow to a fine orizontal bar with arrows at each end and is proving virtually unusable. How i can get the original white arrow back?
View 2 Replies View RelatedHow do I get a double arrow pointer (cursor)to drag corners? I only get an icon with three hands and cannot change it in the Edit-cursor tools.
View 4 Replies View RelatedWhen I select a tool, nothing happens...my cursor remains a useless white arrow! What is wrong??
View 6 Replies View RelatedWith "show mask" ticked the brush is not visible and I cant see what I am doing.
View 11 Replies View RelatedMy cursor appears and disappears while in GIMP as I move the cursor over the canvas. I can make the cursor appear but only if there is no movement of the cursor. It makes no difference which tool I select, the size of the canvas, or the level of zoom.
Please note that this only occurs in Gimp, and none of my other applications. It started when I upgraded from openSUSE 12.1 to 12.2. I'm assuming that it has something to do with my input device configuration, but I could be totally wrong.
I have a total of 3 input devices - Core Pointer, Logitech USB-PS/2 Optical Mouse, and Virtual Core XTEST Pointer. Both the Optical Mouse and XTEST Pointer are DISABLED. Core Pointer is the only one enabled. Enabling Optical Mouse and XTEST Pointer give me other problems in Gimp and need to remain disabled.
For the Core Pointer, Mode is set to SCREEN, a message says that 'The axis X has no curve', and the following Axis Settings:
X 1
Y 2
Pressure none
xtilt none
ytilt none
wheel none
In Gimp Preferences->Input Controllers, there are three active controllers - Mouse Buttons, Main Mouse Wheel, and Main Keyboard.
OS: Linux 3.4.11-2.16-desktop i686
System: openSUSE 12.2 (i586)
KDE: 4.8.5 (4.8.5) "release 2"
Display Info:
Vendor: Intel Corporation
Model: G33
2D driver: intel
3D driver: Unknown Gallium (9.0.1)
Apparently the issue has been happening since as far back as CS2. The flashing text cursor is only visible in the upper left hand portion of the screen. If the text your are attempting to edit is on the far right or bottom of the screen, the cursor vanishes. Some people have suggested zooming in and out, but this only appears to solve the problem because the art board may get nudged into the "good" portion of the screen. I did a screen shot and found that the cursor is only visible in about a 930p x 600p area of the window (not including toolbars). Incindentally, the is the same size that the window defaults to when initially opened. On a HD monitor, this amounts to a very small space.
View 9 Replies View RelatedAll I want to do is put a couple of arrows in an illustration! I select custom shapes, then arrows, then I mouse-drag out the arrow, and, of course, they disappear when saved. So...now realizing that this is a path, I duplicate my first layer and place the arrows on the new layer. then I flatten. Still, arrows disappear.
View 1 Replies View RelatedThere is no right pointing arrow beside keywords beginning with u and on to z. How do I make the right pointing arrow reappear?
View 5 Replies View RelatedI've got CS6 and Windows 7. Trying to make a line with an arrow on one end curve around a circle. Actually want it to have a 3D look like it was curving around the back side of a globe. How do you do this?
View 12 Replies View RelatedI want to use the draw arrow script in gimp. I've downloaded and installed the .scm file in the gimp script folder. So far, so good! But I can't see how to access the script .
View 3 Replies View RelatedWhen I use the arrow keys or mouse dragging to move items , one click on an arrow moves the item a certain distance. I would like to shorten that distance.How can I do that?
View 1 Replies View Relatedwhy does a layer move more slowly when using the arrow keys on the keyboard if the layer is a 'floating selection'? my Gimp moves layers MUCH more quickly when using the arrow keys if I go to 'to new layer' first! is this a problem or to be expected?
View 5 Replies View RelatedOk so im working on a project
An animated email signature where an image of an arrow moves from the left to the right of the screen - easily done with a few frames and animation in gimp the arrow needs to move behind a paragraph of text which has the persons name, work address, email and phone numbers.
So the question remains is it possible to have one fixed frame (persons contact details) in a project of say 20 frames (which make the moving arrow behind the text)?? AND can
why doesn't the arrow leader disappear when I flip my arrow direction to the inside..
see image
I load my .cuix file into Autocad 2013 using VB.Net:
Dim mg As ObjectTry mg = Application.MenuGroups.Item(cuiName)Catch ex As System.Exception mg = Application.MenuGroups.Load(cuiFile)End Try
File loading sucsessfuly, but my menu is invisible.
I tried do this, but got an error..
Dim i As Integer For i = 0 To mg.Menus.count - 1 mg.Menus.Item(i).Visible = True Next
How to make menu visible?
I am fairly new to more than the basic elements of photoshop. I am using 'Actions' to create a e-book cover and had my design created but when I pressed finalise iget the error box - The command Merge Visible is not available with two boxes continue or stop Clicking on either box produces no results.
My query how do I cure this please, I also notice that in the layer detail menu all but the background layer have disappeared. I have taken back steps and re-entered layers with the same result. Forgive my ignorance I am a silver haired surfer who was told it was easy to create e-book covers in photoshop.
I have just added a seond external drive to my Windows 7 computer. I can view the contents of my backup drive but I cannot see the new Seagate drive I just installed. I have read and searched but cannot figure out how to make the drive visible.
View 4 Replies View RelatedI'm an absolute beginner, and cannot find a simple pointer in GIMP. By simple pointer I mean an arrow to select an object, similar to the pointer in Inkscape. What am I missing?
View 7 Replies View RelatedI don't come out of that, how I can only the outlines visible.
View 2 Replies View Related