I have an image with our company logo on it that I need to single out so that I can use it on other documents. How would I extract the "Inverness Landing" logo from this image?
View 34 Replies
Is the image trace feature any better at tracing scanned business cars and newsprint ads in order to extract a logo? Clients never seem to have clean copy to supply me with.
View 1 Replies View Relatedim having an issue with my site Headphone Styles, I'm trying to extract the logo at the top left hand corner and edit in photoshop. if this image file extension is compatible with photoshop?
View 4 Replies View RelatedHave to deepatch (cut out) a horse from this pic, but it's hairs are everywhere. Also, the background doesn't differ much.
Tried through channels, even quick mask pro 4.1, really run out of ideas, you tube can't help, no photoshop users that I asked can help. Can you, please?
Attached file is too small for you to see the details, don't know how to upload bigger image.
Attached is a .JPG I would like to modify. I have many drawing like this one that we would like to make into a catalogue.
I would like to make all theses doors the same image size with the a square transparent background.
I have figured out how to remove the background however when I try to adjust my image size it is still adjusting my canvas size.
What I have been trying to do is have a transparent background layer with the door image on a separate layer but I'm not having any luck.
I'm new to PS so my knowledge is limited. I'm using the CS4 extended version.
In Photofiltre, it's dead easy to extract the gray tones from an image to boost up the colours. It's often better than just increasing saturation or so.
But since I have Photoshop CS3 I'd like to do it there. It must be possible to do something like that too. But how?? I just can't find the right way?
I know this is a simple task if you understand masks better than I do but I normally slave away with max zoom and an eraser until I get the image extracted the way it looks good. Unfortunately for this image its going to be blown up and when I look at it the girl appears like she has been eaten around on all edges by termites.
View 9 Replies View RelatedSay I want to extract a photo of someone and put it onto another picture with all of their strands of hair intact etc - I know you are meant to extract the image in 'extract' and do the highliting and filling etc, but I find this never works. I always get left with a jagged, bitmapped edge, no matter how much I play with the tolerance thingy.
Can someone tell me a definitive way of cutting a face out, as if it were Dirk Benedict on the cover of Corvette Monthly with all of his beautiful strands of hair on show?
if any of you know of a way to extract like a person out of a picture but a very detailed picture say for example a picture of a woman with her hair blowing in the air and each hair strand is captured?
View 2 Replies View RelatedI'm transcribing some of the metadata from image files to build a simple catalog. Included are things like dimensions, resolution, and photo date. Is there a way to extract this data other than manually?
View 10 Replies View RelatedI wanted to extract a image form a background.
Here is what I am doing:
Opening Photoshop 7
Open .jpg file
Lasso around the image
Go to click Mask Icon but its greyed out and I could Not click it?
I have this image, and would like to extract the drop shadow from it. I made the drop shadow using the blending options. I would like to just have the drop shadow so I can use it as a background image in a div.
View 5 Replies View RelatedI have a high-res image of a model of a ship that I'm looking to put on top of a seascape image. The pictures below are a lot smaller and cropped then actual.
Here is a crop of the image of the ship, luckily it's on a plain background and nothing more complicated: After much trial and error, Fluid Mask did a decent job and I'm on the fence about saying useable:
However, this is a thought I had when scrolling through blending modes on the ship's layer. Here it is on Multiply:
Obviously it's too dark, but in terms of the edges on the small details like the ropes, it looks great. I got thinking about somehow automating Photoshop to recognize wherever a pixel is different from the background layer below it, Photoshop would be able to tell where the image is and where the background is, since Multiply removes any white but leaves other colors (albeit darker).
I don't know how this would be done if it's possible at all, I'm guessing with some sort of code made into a plugin or something.
I have an image where there is an object in the foreground that is in the shade and the background that is bright. I want to correct the foreground image. I have tried to extract the foreground image and then drag the original picture onto the extracted one. I assumed that the I could somehow have the extracted image on its own layer and adjust it. When I do that either in the extracted file (before moving the original picture back onto it) or when I try to select its layer in the resultant picture, the entire picture -- foreground and background -- all layers, seem to get adjusted. How can I isolate the extracted image / layer to be able to adjust just that image.
View 3 Replies View RelatedI am doing a head start in GIMP. That means i am pretty new to GIMP. I have a bunch of tasks to do.
At the moment - i have a special task. i have a image that has got some arrows - i want to extract the colors (that are the exact colors of all the arrows.) After this i want to draw in a new image a bunch of balls - exactly with these colors. Is this doable!?
´
Question: how do i do extract the exact colors - can i get the exact color scheme - some hexa-code or how would you do that!?
Attached File(s) pfeile_ausschnitt_.jpg (40.75K)
Number of downloads: 3
crazy_balls_only.jpg (67.61K)
Number of downloads: 3
i have a client who has asked me to include her company logo, along with text, on a digital photograph which i then will have printed. writing text on a photo in photoshop is simple enough, but i don't know how to drop the logo (i've been sent two copies, jpg and tif) onto the photo.
View 1 Replies View RelatedNow I stumbled upon this image awhile ago,and I thought it would be cool for my bands logo
View 4 Replies View RelatedHow I extract a reasonably dark image from its background? Below are two identical images with white background.
But the preset color of my vistaprint business card is light blue. So I just want to paste the image from the links below onto a light blue business card if that is possible.
[URL]........
[URL]........
This is almost 100% what I want: [URL].......
but for some reason the resolution from this home made job comes out terrible at Vista Print so I have to do the card writing on their site and give them a better resolution image which the one in the first two links is.
I have a logo that I need to change the color on. Its currently black.
View 3 Replies View RelatedI'm a coder and I don't have much experience yet with photoshop but I'm trying to build a website with a nice top image containing my website's logo and I would love to have it in some sort of 3d effect where the text is like carved into background of the image.
View 4 Replies View RelatedHow can I add a logo to a very good realistic inage of a golf ball. Ideally the image would flow right down into the "dimples". But I would be happy if I could simply get the logo image to kind of wrap around the ball a little. Does anyone know of a tutorial around that would help me to understand how to do this ?
View 1 Replies View Relatedi want to take the acura logo and put it over a picture of my car and make it like transparent but still able to see the edges?
View 1 Replies View RelatedOn adobe photoshop, I know that there is a program that automatically resizes images for you.
I'm pretty sure there is program that automatically puts an image on each photo for you, that you choose in a folder.
Ex: How do you put your logo on the bottom of the right corner (or anywhere) on all the photos you put in a folder?
I am using photoshop cs 2 on a windows xp.
i have a logo which is in resolution 300
i have to apply the logo to vaious files which are resolution 150 or 120 or even 300
I have an action created for doing that
My problem is that the logo resizes itself on a 120 res image and a 150 res image. as in it enlarges.
Its normal for that to happen i know due to differences in the resolution.
How can i constrain the logo from resizing onto different resolution images.
As in i cant lock my logo layer cause my action consists of creating guides, aligning the logo horizontal left and vertical below and merging the layers and finally saving the files.
What can i do to constrain the logo size from changing on different resolution images.
my logo size is 5.5" x 2.5"
my images sizes are 45" x 225"
I have a drawing that has an aerial Images inserted into it using a WMS Connection How to extract Image Name through Autolisp from this
View 5 Replies View RelatedI am attempting to create screenshots from an old video game and one part of the game includes a semi-transparent overlay layer that I would like to extract into its own image. I am able to render each layer separately in the emulator I'm using, but the screenshot tool is only able to export the final rendered image, so the transparent layer, when rendered alone, still results in a screenshot where it has been merged with the game palette's background color. I have managed to get 2 different copies of the overlay image using 2 different background colors, but I don't know the transparency percentage on the overlay. Is it possible to extract the original semi-transparent overlay with its original colors and transparency levels knowing the original background color? I can get more screenshots with different background colors if that would work. Also, the overlay only has a 5-color palette, so it's not a terribly complex image. I'm attaching the images I have with the background colors included as separate layers in each.
View 3 Replies View Related I used to use freehand as my defacto drawing tool until I switched to AI. Back in those days, I also used "Streamline" (URL...) to perform the functions image trace does today. While it's results were somewhat crude, the software provided me the vector points, paths and acnhors i needed. After every trace, I could manually edit the resulting vector traces.
I have been using CS6's tracing feature, but the one thing I cannot figure out for the life of me is the "Bounding box" issue for an imported image. Everytime I trace a drawing, AI's tracing results always place a bounding box around the traced image area. My goal: To trace an item, get rid of the bounding box and extract the outlines and paths so that I can then modify these to my linking.
Can this be done? Im sure it can,... I just cannot find out how. (Or am I making crack wishes?) All I'm saying, if Streamline allowed me to edit paths from a trace, then it'd be a shame if AI CS6 does not.
I have a 3ds model of a golf ball I purchased. It imports properly into my Photoshop CC. I haven't been able to figure out how to apply an image (my logo) to the surface of the golf ball. Also, the golf ball has a dimpled surface so I will want the image to follow the contours of the ball, as if it would look if the logo were painted onto a real golf ball.
EDIT: Also, I want to keep the golf ball as a 3d object so I can animate it in a scene.
making an image that has only text and a transparent background. I want to use this as a banner/logo for my website and would like the "text" to sit on top of my site background.
I have tried several things that I know of in PS CC, but when I upload it to my website I get the text siting on a white background, thus my site background does not show through.
I have a picture of a coffee mug.
And I want to "wrap" a circular logo to the mug to make it look like the logo is imprinted on the mug. What's the best way of going about this so it doesn't look like it was a poor photoshop hack?
What I have figured so far is to use the Edit / Transform / Perspective to squish the bottom and widen the top to give the perspective. And then I go to Edit / Transform / Scale and squish it vertically.
Heres what I end up with:
Not bad but it could be better. Photoshop CS 5.5
I read a little about using the displace filter to do what I want but could not get it done properly.
I have a nice "golf ball" image. and I want to put a logo on it and have the logo image flow right down into the dimples like it would be on a real golf ball.
I'll attach the images I'm woking with. If you can give me a step by step procedure I would really appreciate it. I need to get this done but I would also like to understand how to do it so I can be a better photoshop user in the future.
