Photoshop :: How To Extract Image From JPG File
Sep 5, 2013
Attached is a .JPG I would like to modify. I have many drawing like this one that we would like to make into a catalogue.
I would like to make all theses doors the same image size with the a square transparent background.
I have figured out how to remove the background however when I try to adjust my image size it is still adjusting my canvas size.
What I have been trying to do is have a transparent background layer with the door image on a separate layer but I'm not having any luck.
I'm new to PS so my knowledge is limited. I'm using the CS4 extended version.
View 5 Replies
ADVERTISEMENT
Dec 19, 2012
I'm transcribing some of the metadata from image files to build a simple catalog. Included are things like dimensions, resolution, and photo date. Is there a way to extract this data other than manually?
View 10 Replies
View Related
Jul 30, 2008
Have to deepatch (cut out) a horse from this pic, but it's hairs are everywhere. Also, the background doesn't differ much.
Tried through channels, even quick mask pro 4.1, really run out of ideas, you tube can't help, no photoshop users that I asked can help. Can you, please?
Attached file is too small for you to see the details, don't know how to upload bigger image.
View 9 Replies
View Related
Dec 7, 2012
I´m trying to extract text from a Corel file to a TXT file in another editor and then merge it back in.Extracting the text seems to be working just fine but when I´m trying to merge it back in I get the error message "Wrong file format or could not open".
View 2 Replies
View Related
May 8, 2012
In Photofiltre, it's dead easy to extract the gray tones from an image to boost up the colours. It's often better than just increasing saturation or so.
But since I have Photoshop CS3 I'd like to do it there. It must be possible to do something like that too. But how?? I just can't find the right way?
View 1 Replies
View Related
Apr 12, 2012
I know this is a simple task if you understand masks better than I do but I normally slave away with max zoom and an eraser until I get the image extracted the way it looks good. Unfortunately for this image its going to be blown up and when I look at it the girl appears like she has been eaten around on all edges by termites.
View 9 Replies
View Related
Feb 18, 2003
Say I want to extract a photo of someone and put it onto another picture with all of their strands of hair intact etc - I know you are meant to extract the image in 'extract' and do the highliting and filling etc, but I find this never works. I always get left with a jagged, bitmapped edge, no matter how much I play with the tolerance thingy.
Can someone tell me a definitive way of cutting a face out, as if it were Dirk Benedict on the cover of Corvette Monthly with all of his beautiful strands of hair on show?
View 2 Replies
View Related
Jul 21, 2008
I have an image with our company logo on it that I need to single out so that I can use it on other documents. How would I extract the "Inverness Landing" logo from this image?
View 34 Replies
View Related
Aug 26, 2007
if any of you know of a way to extract like a person out of a picture but a very detailed picture say for example a picture of a woman with her hair blowing in the air and each hair strand is captured?
View 2 Replies
View Related
Apr 4, 2012
Let's say I have a larger file with several layers and various elements on the layers - like a web page layout.
On 1 layer the is top logo.
I am trying to extract just that 1 part and save for web as small jpg or png and put that one pic in my web design app.
Q: How do I easily extract / export / save for web (small version) just that one part?
View 5 Replies
View Related
Mar 23, 2005
I wanted to extract a image form a background.
Here is what I am doing:
Opening Photoshop 7
Open .jpg file
Lasso around the image
Go to click Mask Icon but its greyed out and I could Not click it?
View 3 Replies
View Related
Mar 10, 2006
I have this image, and would like to extract the drop shadow from it. I made the drop shadow using the blending options. I would like to just have the drop shadow so I can use it as a background image in a div.
View 5 Replies
View Related
Jun 13, 2012
Never used Photoshop before.
I have an image which contains 4 images in a PSD and want to extract them into seperate images so i can upload them to my website.
I guess this is very simple but i don't know which tool to uyse because there's too many
I'd also like to remove the text from within each image and save them as seperate png files
View 3 Replies
View Related
Jul 1, 2008
I have one psd file.
I want to do the same things in my few other images.
How I can extract actions/commands from the PSD file?
So I can apply same things with my few images.
I want to know what has been done with image (jpg) file.
View 1 Replies
View Related
Jul 1, 2008
I have one psd file.
I want to do the same things in my few other images.
How I can extract actions/commands from the PSD file?
So I can apply same things with my few images.
I want to know what has been done with image (jpg) file.
View 1 Replies
View Related
Aug 27, 2011
I have a high-res image of a model of a ship that I'm looking to put on top of a seascape image. The pictures below are a lot smaller and cropped then actual.
Here is a crop of the image of the ship, luckily it's on a plain background and nothing more complicated: After much trial and error, Fluid Mask did a decent job and I'm on the fence about saying useable:
However, this is a thought I had when scrolling through blending modes on the ship's layer. Here it is on Multiply:
Obviously it's too dark, but in terms of the edges on the small details like the ropes, it looks great. I got thinking about somehow automating Photoshop to recognize wherever a pixel is different from the background layer below it, Photoshop would be able to tell where the image is and where the background is, since Multiply removes any white but leaves other colors (albeit darker).
I don't know how this would be done if it's possible at all, I'm guessing with some sort of code made into a plugin or something.
View 2 Replies
View Related
Dec 29, 2004
I have an image where there is an object in the foreground that is in the shade and the background that is bright. I want to correct the foreground image. I have tried to extract the foreground image and then drag the original picture onto the extracted one. I assumed that the I could somehow have the extracted image on its own layer and adjust it. When I do that either in the extracted file (before moving the original picture back onto it) or when I try to select its layer in the resultant picture, the entire picture -- foreground and background -- all layers, seem to get adjusted. How can I isolate the extracted image / layer to be able to adjust just that image.
View 3 Replies
View Related
Sep 1, 2006
I'm having trouble with the Extract filter being grayed out/disabled in some types of files...it seems like I can't use it on TIFF files, but I can if it's a JPEG.
View 2 Replies
View Related
May 26, 2012
I am doing a head start in GIMP. That means i am pretty new to GIMP. I have a bunch of tasks to do.
At the moment - i have a special task. i have a image that has got some arrows - i want to extract the colors (that are the exact colors of all the arrows.) After this i want to draw in a new image a bunch of balls - exactly with these colors. Is this doable!?
´
Question: how do i do extract the exact colors - can i get the exact color scheme - some hexa-code or how would you do that!?
Attached File(s) pfeile_ausschnitt_.jpg (40.75K)
Number of downloads: 3
crazy_balls_only.jpg (67.61K)
Number of downloads: 3
View 7 Replies
View Related
Nov 6, 2012
I want to extract the audio from a short avi clip for editing in Audacity. The user guide says it can be done but I can't find where it says how.
View 1 Replies
View Related
Feb 21, 2011
I have an auto cad file which has around 100 different layers, I want to extract one layer to a dxf file. I have frozen all layers accept the layer I require and have then tried to use the dxf out command, however the created dxf file still contains all of the other layers. Is dxf out the correct command or am I doing something wrong?
View 2 Replies
View Related
Feb 6, 2012
How I extract a reasonably dark image from its background? Below are two identical images with white background.
But the preset color of my vistaprint business card is light blue. So I just want to paste the image from the links below onto a light blue business card if that is possible.
[URL]........
[URL]........
This is almost 100% what I want: [URL].......
but for some reason the resolution from this home made job comes out terrible at Vista Print so I have to do the card writing on their site and give them a better resolution image which the one in the first two links is.
View 17 Replies
View Related
Nov 10, 2013
In an effort to keep a sort of "script" of my project I am hoping that there is some way to extract all the titles in a project file as a single text file? Have installed X6 Pro and like it.
View 3 Replies
View Related
Jul 10, 2012
1) Is it possible to extract data from dwf file in autocad 2012?
2)I need to extract blockNames from dwg file but i dont know how to extract blackNames because text in dwg file may change but pattern will remain same.
I am using Visual studio 2010 and Autocad 2012
View 6 Replies
View Related
Dec 26, 2013
We have a bunch of dwg files. The requirement is to extract a specific list of attributes from the layers within CAD to a csv file. We are currently manually opening the dwg using AutoCAD and exporting the attributes. This has been time consuming and we need a faster process.
What options do I have to programmtically extract them?
View 9 Replies
View Related
Sep 21, 2012
If a drawing is opened by another user, I want to retrieve the name of that user. I presume that is in the dwl locking file. I I can't find any info on this topic. How do I read/extract the user name from a dwl file with .NET/c#?
View 2 Replies
View Related
Feb 17, 2014
I cannot extract/unzip the Lightroom Analytics file on a Windows 7 system
View 11 Replies
View Related
Nov 25, 2013
I have a drawing that has an aerial Images inserted into it using a WMS Connection How to extract Image Name through Autolisp from this
View 5 Replies
View Related
Sep 18, 2012
I am attempting to create screenshots from an old video game and one part of the game includes a semi-transparent overlay layer that I would like to extract into its own image. I am able to render each layer separately in the emulator I'm using, but the screenshot tool is only able to export the final rendered image, so the transparent layer, when rendered alone, still results in a screenshot where it has been merged with the game palette's background color. I have managed to get 2 different copies of the overlay image using 2 different background colors, but I don't know the transparency percentage on the overlay. Is it possible to extract the original semi-transparent overlay with its original colors and transparency levels knowing the original background color? I can get more screenshots with different background colors if that would work. Also, the overlay only has a 5-color palette, so it's not a terribly complex image. I'm attaching the images I have with the background colors included as separate layers in each.
View 3 Replies
View Related
May 29, 2013
I used to use freehand as my defacto drawing tool until I switched to AI. Back in those days, I also used "Streamline" (URL...) to perform the functions image trace does today. While it's results were somewhat crude, the software provided me the vector points, paths and acnhors i needed. After every trace, I could manually edit the resulting vector traces.
I have been using CS6's tracing feature, but the one thing I cannot figure out for the life of me is the "Bounding box" issue for an imported image. Everytime I trace a drawing, AI's tracing results always place a bounding box around the traced image area. My goal: To trace an item, get rid of the bounding box and extract the outlines and paths so that I can then modify these to my linking.
Can this be done? Im sure it can,... I just cannot find out how. (Or am I making crack wishes?) All I'm saying, if Streamline allowed me to edit paths from a trace, then it'd be a shame if AI CS6 does not.
View 2 Replies
View Related
Apr 17, 2013
I need to open about 50 folders and extract the image sequences within the folders from my library. A flame demo artist showed me how to do it at NAB and I can't remember how to do it now.
View 2 Replies
View Related
