I remember in Elements 9 I was able to convert a color photo to black and white and then with the paint brush I could go and paint in the original color on just specific areas. How is that done in PS5?
View 4 Replies
I am very new to photography and Lightroom 3.4 64 bit. I have a photo of an apple on the table. I want to get the photo black and white (did that already). Now I want the apple it self to remain its own red color. How do I do that?
Also, I have this apple and its reflection is on the knife that is cutting the apple. How can I get that in color too?
My goal is to replace the top magazine cover (Needlework) in the following image.How do you embed the the 2nd image to fit a spefiic area in the 1st image. I have tried using the ctrl-t function and still is not fitting exactly.
View 3 Replies View RelatedI need to be able to measure the square inches of a printed area in which hew will be using specialty inks. We want to get a descent cost estimate, how to measure the square inches of a specific element of a design, in Photoshop or any of the other adobe programs?
View 1 Replies View RelatedLike the title says I'd like to know how to darken (or change the color) a specific irregular area of a picture, without afecting the rest of the picture.
I want to darken the color of the thin "vertical!?" lines of this picture, without afecting the remaining picture:
I made a model and i want to place it in 4200sqft . How to do that ?
View 6 Replies View RelatedI use Coreldraw x3 for cutting vinyl to put on shirts and windows ect. I cut on 14" and 24" rolls of vinyl. To save vinyl I make a rectangle in corel at 14x25" or 24x25" and then I put the graphics in that rectangle as snug as I can to make sure I conserve as much vinyl as possible.
I am wondering if there is a way to select my rectangle and the art that I want to piece into it and have the program automatically fill up the space as sparingly as possible. This would save me a lot of time and it would probably be more efficient for saving vinyl because corel would know the optimal way to piece the art in.
Is this possible? I have aluminum part and would like to know how much weight the thinnest area can handle.
View 3 Replies View RelatedI am trying to use the rectangle tool to select a rather specific area. I am trying to make a 50x50 square in the bottom left corner, but I don't know how I would accomplish this.
View 1 Replies View RelatedI have a colored object, and I have a specific swatch of color that I need to change the current color of the object to. The problem I'm having is that the specific color that I'm trying to apply to the object doesn't look integrated with the object itself, it just looks like I've applied a color film over it. It's milky-looking and there's not enough contrast. I've tried adjusting levels, using different blending modes, using the Match Color command ..I can't seem to keep the integrity of the color I'm applying to the object, while still keeping the integrity of the details of the object itself. How should I tackle this using multiple layers and blending modes, and so the new color looks integrated and believable?
View 8 Replies View RelatedIs there a way to code certain regions of an image for a click event without adding a hit area?I have a map of Texas with each region. Clicking on a region brings this region bigger to the front. Then I want a click event for each county to bring up its name and other data.
View 12 Replies View RelatedI remember in LDD you could insert points in an area, Is that possible in civil 3d. I have a small area of an big project that i want to review all the points. This project has 517000 points in it so it takes to long to insert all of the points.
View 9 Replies View RelatedIs it possible to copy a specific area (Artboard area) and paste it to new document by using JSX.
View 1 Replies View RelatedAny Illustrator equivalent to Photoshop’s Displacement Map?
I need to be able to horizontally displace an area of vertical stripes using a specific greyscale displacement map.
It’s fairly simple in Photoshop but I would much prefer vector output.
O.k., I could do it in Photoshop and then vectorize the result with Live Trace, but is there a less roundabout method?
I've had a simple lisp I've been using for years that suddenly disappeared. It required that you identify a block name, tag name, and the value that you want the tag to be. All of this is performed via command line, so it is scriptable. Since I lost it, I've been experimenting with -attedit. This command comes frustratingly close to what I'm looking for, except it only appends an existing tag, or replaces a specific string within the tag; I can't get it to replace the entire tag, regardless of its value.
1> Any lisp routine that does what I describe?
or
2> How to make -attedit replace a tag value without regard to what the value currently is (like a * wildcard)?
I have a layer that is all white with text and some shapes (with heavy anti-aliasing, so the alpha channel variations of white, too) and I am trying to convert it to a specific other color (just a cream color that I have the HTML code for).
So, when a layer is all one color (not counting variation in alpha values), is there a technique to change that to a specific other color, rather than just toggling the "Color Balance" to get an approximation?
When I first got CS5 I was having problems with color management. Not sure how to explain this, but the colors in the preview pane differed drastically after I clicked on the photo to edit . That is, as soon as I clicked on the photo I wanted to edit, it turned out much duller. the reds suddenly become brownish orange. and they're not raw, so that's not the problem. Although I shoot in Adobe RGB I set the color management to SRGB and (I don't remember what else I set) and when I clicked on a photo to edit, I would get the message where I had the ability to discard the icc profile (no color management) and that's what I chose. there were all my rich colors, and it was worth the hassle of doing that with every unedited photo.
I turned CS5 on and everything had changed. Now I'm back to seeing the dull colors in CS5, even the one's that I already edited. I have some photos with rich red, they're fine on my website, but in photoshop dull brown.
I'm temporarily back to using Corel, because for some reason it has no problem displaying the correct colors. So it's something going on with PS. I think somehow, though I don't know how, maybe some setting got changed. But am desperate. I've tried all sorts of combinations. using the adobe setting, switching things on and off and dull, dull, dull.
how do I select a specific color on an image.
View 5 Replies View RelatedI don't wanna use the clone tool but rather sample the color and remove the blue color.
View 1 Replies View RelatedOccasionally I select part of an image, apply a hue/sat adj layer, check colorize and attempt to re-create an RGB color on that selection....but it all seems to be trial and error, hunt and peck method of moving HSL sliders or entering numbers.
I tried matching the "numbers" to an HSL equivalent of the desired RGB color but not much better/faster desired results.
I realize the image has a range of tonal values so hitting the exact number overall is not do-able using this method, nor is it the goal (otherwise a simple paint bucket fill would work). But at least somewhere in the selection image I'd want to be sure my color is very close.
I tried using eye dropper color sample spots (up to 4), which works, but the process is slow and fiddly.
My goal is to be able to re-color/colorize part of an image to match an RGB sample color, yet leave the tonal range in the image still looking like it is part of the scene; including shadows and highlights and midtones.
I have an open path in Photoshop CS4. When I go to stroke the path, Photoshop makes a stroke that closes the path from end to end. I want to stroke just the path with a specified stroke width in a specific color.
View 2 Replies View RelatedI am trying to find a way to target specific pixels of a certain color and value range. The Color Range dialog does not produce the desired effect. For instance the white pixels bleeding throughthe fabirc. What is the proper way to select these pixels
View 4 Replies View RelatedThere is a specific CMYK combo of red I created that I want to use to tint a photo. How do I do that in the "proper" way?
View 8 Replies View RelatedIs there a way to make the color select tool not only select a specific color but related shades as well. I have a graphic that is mainly shades of gray but with black outlines and divisions as well as other colors mixed in. I want to shift all the shades of gray to shades of dark yellow without have to select each shade individually.
View 1 Replies View Relatedis it possible to create an action in the action palette which chooses a specific color I want , instead of doing it manually with the magic wand? For example something like "Set selection all blacks"?
View 2 Replies View RelatedI want to select a specific color from within the image, and change all similar colors within that image to a different color. In other words, after using the Color Picker Tool to select a color from the image, I want to take the selected color (and everything in the image that is equal to or similar in color), and change them all to a different color.
I tried using the Path's Tool to create an outline in the image, and changing colors that way, but it changes all the other colors in the selection I don't want to change. I just want to change all colors in the image/selection that are equal to or similar to the selected color. How do I do this?
i would like to modify this attached image so that i get 3 images; each of the image should has its own border with one of these colours:
R=250, G=198, B=200 (FAC6C8)
R=191, G=233, B=211 (BFE9D3)
R=255, G=251, B=191 (FFFBBF)
So i would like to have 3 images with differents border colour: one FAC6C8 border, one BFE9D3 border and one FAC6C8 border. I note that an other image will be add in the center of the image; this last image has all the 4 coulour at the same time (FAC6C8,BFE9D3,FFFBBF et BFBFBF)
I think that i should select the border (to not influence the coulours of the centre's image) and remplace it by the wanted colour ... but how to do it?
i would like to modify this attached image so that i get 3 images; each of the image should has its own border with one of these colours:
R=250, G=198, B=200 (FAC6C8)
R=191, G=233, B=211 (BFE9D3)
R=255, G=251, B=191 (FFFBBF)
So i would like to have 3 images with differents border colour: one FAC6C8 border, one BFE9D3 border and one FAC6C8 border. I note that an other image will be add in the center of the image; this last image has all the 4 coulour at the same time (FAC6C8,BFE9D3,FFFBBF et BFBFBF)
I think that i should select the border (to not influence the coulours of the centre's image) and remplace it by the wanted colour ...
I use photoshop 7.0.1.
How do I fill in an entire area with one color, like a paint bucket on ms paint and thinks like that.
View 4 Replies View RelatedIs there a way to change color of an area and have instant update while I'm still in the color picker dialogue?
background info:
I need to paint my house and I want to color the house in Photoshop first to test the color scheme. Currently I set it up so the house is first turned into gray scale, then a color layer is multiply or soft light onto the house to "paint" the house while retaining features of the house. There are several such color layers, each with a layer mask for the walls, the trims, and the garage door.
When I want to change the color of, say the walls, I select that layer and fill it with a new color. But I don't see the new color until I exited the color picker and the fill dialogues. Is there a more interactive way to change color?
After creating a color range channel, broadly, I used the quick mask tool and was working on tightening up on the details. Reloading the selection showed the marching ants around the updated area, however the red mask still showed the original area, not the newly updated area.
Is it possible to update the masked area w/ the red painted area as well as the marching ants?
