My goal is to replace the top magazine cover (Needlework) in the following image.How do you embed the the 2nd image to fit a spefiic area in the 1st image. I have tried using the ctrl-t function and still is not fitting exactly.
View 3 RepliesI have a set of drum scans of medium format film images. The pixel dimensions of the scans vary slightly. But they all consist of images of the same frame size, with borders around the image (scanned film outside the image.) All of the scans were done at 4000 pixels per inch, at 100 percent.
For example, the pixels dimensions of one scan is 10492 x 6907, another is 10390 x 6968, and another is 10483 x 6976.
I want to crop all of them to 10200 x 6738 pixels. I want to delete the cropped pixels, and I do not want any scaling to take place. I want to preserve the original metadata (the scanner model, pixels per inch, etc.); in other words, I want to modify the files (or copies of the files), not create new files. The print size does not matter.I've tried several approaches, and none of them let me do what I want:
1.) Manually cropping each scan individually does not give me the control that I need for cropping to precise pixel dimensions.
2.) Creating a Crop Preset with the desired pixel dimensions doesn't work because using it results in scaling (I think.)
3.) Using Canvas Size doesn't work because the borders in the scans are not equal on all four sides. I need to be able to move and position the image inside the crop area.
4.) Using New, and Place… allows me to create a Canvas Size with the desired pixel dimensions and resolution, and move the placed images; they will fit without scaling. However, this results in a new file being created, and therefore the metadata is lost.
I remember in Elements 9 I was able to convert a color photo to black and white and then with the paint brush I could go and paint in the original color on just specific areas. How is that done in PS5?
View 4 Replies View RelatedIs there a way in Illustrator CS6 to scale text inside a text box so that the text and box scale together proportionately? Not using the scale tool where you have to enter percentages, but using a keystroke. In Quark, you can do this by holding down Command + Shift and dragging the box. This will make the text and box bigger keeping the same dimensions. It's a very quick and easy way of changing the size of your text.
View 4 Replies View RelatedI need to be able to measure the square inches of a printed area in which hew will be using specialty inks. We want to get a descent cost estimate, how to measure the square inches of a specific element of a design, in Photoshop or any of the other adobe programs?
View 1 Replies View RelatedLike the title says I'd like to know how to darken (or change the color) a specific irregular area of a picture, without afecting the rest of the picture.
I want to darken the color of the thin "vertical!?" lines of this picture, without afecting the remaining picture:
I made a model and i want to place it in 4200sqft . How to do that ?
View 6 Replies View RelatedI use Coreldraw x3 for cutting vinyl to put on shirts and windows ect. I cut on 14" and 24" rolls of vinyl. To save vinyl I make a rectangle in corel at 14x25" or 24x25" and then I put the graphics in that rectangle as snug as I can to make sure I conserve as much vinyl as possible.
I am wondering if there is a way to select my rectangle and the art that I want to piece into it and have the program automatically fill up the space as sparingly as possible. This would save me a lot of time and it would probably be more efficient for saving vinyl because corel would know the optimal way to piece the art in.
Is this possible? I have aluminum part and would like to know how much weight the thinnest area can handle.
View 3 Replies View RelatedI am trying to use the rectangle tool to select a rather specific area. I am trying to make a 50x50 square in the bottom left corner, but I don't know how I would accomplish this.
View 1 Replies View RelatedIs there a way to code certain regions of an image for a click event without adding a hit area?I have a map of Texas with each region. Clicking on a region brings this region bigger to the front. Then I want a click event for each county to bring up its name and other data.
View 12 Replies View RelatedPhoto editing. How do I select an area within a .jpeg image so I can blur that selected area?
View 2 Replies View RelatedI remember in LDD you could insert points in an area, Is that possible in civil 3d. I have a small area of an big project that i want to review all the points. This project has 517000 points in it so it takes to long to insert all of the points.
View 9 Replies View RelatedIs it possible to copy a specific area (Artboard area) and paste it to new document by using JSX.
View 1 Replies View RelatedAny Illustrator equivalent to Photoshop’s Displacement Map?
I need to be able to horizontally displace an area of vertical stripes using a specific greyscale displacement map.
It’s fairly simple in Photoshop but I would much prefer vector output.
O.k., I could do it in Photoshop and then vectorize the result with Live Trace, but is there a less roundabout method?
I've had a simple lisp I've been using for years that suddenly disappeared. It required that you identify a block name, tag name, and the value that you want the tag to be. All of this is performed via command line, so it is scriptable. Since I lost it, I've been experimenting with -attedit. This command comes frustratingly close to what I'm looking for, except it only appends an existing tag, or replaces a specific string within the tag; I can't get it to replace the entire tag, regardless of its value.
1> Any lisp routine that does what I describe?
or
2> How to make -attedit replace a tag value without regard to what the value currently is (like a * wildcard)?
way to scale down an immage and make it not look so distorted
View 1 Replies View RelatedI have two extremely small images that I need to scale up. Unfortunately i can't post them but i need to know if anyone has any ideas on how to go about making them look more presentable.
View 1 Replies View RelatedMy knowledge (lack of, really) with content aware scaling is that 1st you create a new layer of the background and then rescale accordingly. I did the following: -
1- Created a 2nd layer
2- used quick selection tool on my main subject ( a person) and named it.
3- deselected the selection
4- Edit menu --> Content aware scale
5- resized it to something smaller (chose my previous named selection channel).
6- Pressed "Enter"
The result is that I can now see 2 images; the smaller sitting on the larger. What now? All I want is the smaller image. If I throw away the original layer what I end up is the new layer with the white and gray default background showing as part of the image (which ends up being printed as well or if saved looking as is with the grey-white. Is what I should do the obvious--cut out via cropping the un-needed (gray-white) part?
Is there a keyboard shortcut to zoom the image area to the image size. Kind of like the shortcut ctrl + 0 but the reverse.
View 6 Replies View Relatedhow do I stop an image aligning itself to the edges of the image area.
View 2 Replies View RelatedI am very new to photography and Lightroom 3.4 64 bit. I have a photo of an apple on the table. I want to get the photo black and white (did that already). Now I want the apple it self to remain its own red color. How do I do that?
Also, I have this apple and its reflection is on the knife that is cutting the apple. How can I get that in color too?
I have been using Coreldraw for a few years now but I have never had a problem with scaling images. I created a circle and added some shapes to it. There is spacing between the shapes and the circle and they do not touch each other. When the image is at page size and it looks fine. But when I scaled it down using the shift key the shapes in my images touch the side of the circle and the spacing is gone. This is not what I want. There needs to be spacing between the shapes and the circle. I have included a sample of what I am talking about. How to make Coreldraw scale images properly?
View 9 Replies View RelatedWhat is interpolation when scaling images in Gimp? it is under quality. I see there are None, Linear, Cubic, & Sinc (Lanczos 3)... what are these and which one is the best one?? and does it matter which one e.g. are they all the same?
View 7 Replies View RelatedI've imported an image into gimp, I then have imported another image using File open as layers.
Once this second image is imported it's obviously far too large, I want it to easily sit within the first image.
However when I right click > image > scale image it alter's both of them at once. It does this whether I have both images showing or not.
When I shrink an image, the result seems to be distorted.
I have an image 850x850.
I go: Menu > Image > Scale Image > and set height and width to 306 px
I get the same error no matter what scaling algorithm I use.
See images below, the one scaled by the GIMP has the black circle noticeable shifted to the right hand side. The white gap between the red and the black circles is 6 px on the LHS and it is 3 px on the RHS (measured at the widest part of the circles) . To compare, I have also scaled the image using another image manipulation program (IrfanView) - it scales it properly.
scaled by the GIMP....
scaled by Irfanview...
Is there any setting that you think I may have set incorrectly to get this problem? (Under the View menu, I don't have any "snap to..." checked.)
The test source file is the scaleBug.xcf attachment.
I'm on GIMP 2.6.11, Windows 7 64bit.
New Responsive Scaling feature is great.
It's enabled me to add an Edge Animate file to my responsive Wordpress site using the Edge Suite Plugin.
Only problem for me is that although the 3.7MB file I’ve created scales perfectly on all devices it struggles to play on smartphones. (I assume it's too big and too power hungry to play smoothly on smartphones - even since I've added a pre-loader.)
So, in an ideal world, what I need is a separate low res Edge Animate file that only plays on smartphones.
Failing that, I’d be happy with a 'Down-level Stage' image which could replace the Edge Animate animation.
For a moment I thought I’d found a solution when I came across this Adobe TV movie: [URL]
Unfortunately this clever solution only works when the new Responsive Scaling feature is NOT selected. As soon as it is selected, the animation no longer changes from one layout size to another when the browser window is reduced.
I don’t mind whether the fix is in Edge Animate, Wordpress or the Edge Suite Plugin - I just want a solution!
I need to be able to choose a specific folder to generate image assets to! Is there some way to do this?
Instead of just creating a folder called nameOfMyFile-assets, I want to generate assets to a folder elsewhere!
For my work I have to cut and change the size of images a few thousand times a day.
When I want to save a edited image to a file(every image goes to the same file all the time),I always have to search this file. How can I program CS5.1 to always go to that specific file to save the image. Instead of searching for the file all the time!
Second thing is that the images always have to be changed to the same resolution. Is there a way to 'automate' this. I Know: - File - Automate - Fit Image. But is it possible to do this with a key combination or make a 'button' somewhere?
how to make text look like it was written in the sand of a specific image however I am struggling.I've spent hours searching on Google and going through tutorials but none of em work well.The biggest issue seems to be around the build up of the sand outside the letters, I don't care if my image has this or if it doesn't.
View 6 Replies View RelatedI have an 8-bit image, 4800x3000 px, res 300 40.2M in size. I need to reduce it to 125K max, 640x480 px max, res 72. I must be doing something wrong because my result has lost all clarity.
View 2 Replies View Related