A support person told me that I only need to buy a CS6-upgrade for Windows and would be able to install it on a Windows PC by entering my CS4-Mac-serial number, is that true?
I'd like to know that before I spend a lot of money for the upgrade.
By the way, I don't necessarily need the CS6 version but I'm about to buy the upgrade because I heard that cross-grading works only with CS6.
How do I get my finished grade on ALL my cross-sections at once? I'm getting the existing grade for both section 1 and section 2 grade in the band.
View 3 Replies View RelatedI made a bunch of cross sections of an EG surface and want to define an elevation label at each significant grade break. I see an option to weed by distance but no option that would allow me to place a label at where the slope changes by more than a certain percent.
I found this old thread from three years ago and the best solution to come out of it was deleting individual labels.
[URL]
I am trying to annotate a floor plan to show the location/orientation of section, elevation and detail drawings. The labels must also indicate the appropriate drawing cross reference. (basically a circle with a arrow, text inside circle showing drawing cross reference). My question is - is there an automated way/library to insert such labels or do I have to create each of them from individual elements and make a block?
View 1 Replies View RelatedI love Photoshop CS6, and my absolute favorite new feature is the Color Lookup adjustment layer. So far, I've been extremely happy with the effects I've been able to pull off by combining that with other adjustment layers, channel work, etc.
However, I've gotten to the point where I realize that my next step -- much like a user who graduates up from using actions he/she downloads off of Deviant Art -- is to make my own color look up tables. The only tool at my disposal for this is Speed Grade. (I have a CS6 cloud membership -- off topic, but way to go, Adobe, that made it feasible for me to "graduate" from only having Photoshop CS5.1 to having the full suite at a very reasonable price!)
I've used Speed Grade on video clips I've shot with my Canon 5D MkII to great effect. Nothing I'd post publicly yet (I'm still learning how to shoot motion), but I considered the results to be very positive. I've managed to save several test .look files, as well, both on video footage and still images (JPGs, to be specific).
I always shoot RAW, and my usual workflow is to start in Aperture (I'm a Mac user), do some basic RAW adjustments, then export a 16-bit PSD and get down to the real work in Photoshop. SpeedGrade doesn't yet seem to support PSDs natively, so in order to create a .look which is appropriate for my image, it currently looks like I need to export a JPG (down to 8-bit sRGB, ugh) from Photoshop, then open THAT in SpeedGrade, do my work, save my .look, go BACK into Photoshop, and use the .look file there.
I could live with that if -- IF -- the .look file actually gave me my expected results. However, the only time the .look behaves exactly the same in Photoshop as it does in SpeedGrade seems to be if I open the image as a JPG -- thus losing all my layers, adjustments, smart objects, etc. When I apply any of my .look files to a PSD, they come entirely too dark, every time. Many of them have simply turned an image into a large 22 megapixel black rectangle.
So my question is this: How do I make a SpeedGrade .look file behave predictably in Photoshop, in a 16-bit-per-channel PSD file? I'm OK with changing the color space if I have to (even if it's to sRGB, the bane of my existence) -- but I need to see the same thing in SG that I do in PS. Is this possible today, or am I waiting on the next SG release? Or, and I assume this to be the case -- as I'm a software engineer by trade, and know that this is almost always the case! -- is this a case of user error? And if so, what can I do to correct my user error?
Or, sacrilegious as it may seem since I have all of Adobe's tools, are there other Mac-based products I can use to create color look up files compatible with Photoshop?
In case it matters, here's my platform:
Canon 5D MkII, latest firmware, always shoot RAWApple Aperture 3.2.3. Mac OS 10.7 (late 2011 MacBook Pro 17", 16 GB RAM)Adobe Creative Suite 6 Cloud Subscription (photo, illustration, video tools installed; no Flash nor web tools)
I'm working on a grading plan which excavates down from just outside the waterline of an existing pond. When I create a surface from the grading, it looks like a whole bunch of strange break lines have been added, messing up the surface. I thought it might be the mid ordinate distance but changing that doesn't seem to fix it it. Interestingly, when I grade from the original waterline, this doesn't seem to happen.
Here is my workflow, a picture of the result is shown below.
1. Turned the current waterline into a feature line.
2. Created new feature line by offsetting outside that feature line by 3.16 ft.
3. From new feature line, grade down 10 feet at 3:1
4. Create new surface using grading.
The grading lines (shown in white) look correct. But when I create the surface (green and yellow), it is all messed up.
I want to create a grade (without object grade) using a corridor. This is my assembly:
This only contains the sub assembly "DaylightBench" in the side right.
I have the alignment and profile. I have created the corridor.
red line= alignment
green line= feature line (code Intersecction) converted to polyline.
pink surface= surface (code TOP).
I have added a boundary for surface of type "add from polygon" and I have selected the closed polyline(green line).
However, the boundary seems doesn´t work.
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
I have a profile set up with a surface an alignment and a Water Main. I would like to place grade breaks (Using Profile labels) every 100' along the surface however the increment field isn't available for grade breaks. Weeding doesn't work because it needs to be exactly every 100' I was thinking of creating an expression for it however I still haven't reached that level of expertise.
View 5 Replies View RelatedI noticed a post a few years ago mentioning this function wasn't available then. Is it still not available? Is there a routine? A lisp? An expression that I can make to put a slope arrow inside every tin in my surface with a % grade?
View 1 Replies View RelatedWhy do profile grade markers always reset in section views? This has to have been a wish list item. lsp or software to populate these? I heard in 2014 they still disappear.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram
See attached. What's the best way to model this sloped grade beam? Can I use the sweep?
View 4 Replies View RelatedI was laying out a vertical curve in the roadway profile. I have a vertical curve of 100' in length, however immediately after that it shows a grade break. I do not want this grade break in my profile, I simply want a vertical curve with two grades on the left and right sides. How can I get 2009 C3D to remove the grade breaks? It would be very uncomfortable for someone to have to drive over these in the real world.
View 1 Replies View Relatedi was wondering is it possible to show slopes or grades on my surfaces , or corridors IN PLAN VIEW ?
View 8 Replies View Relatedi have a corridor. the corridor feature line that is supposed to hit the proposed centerline is following my existing grade instead of where the profile is. in other words, the corridor line i need at the centerline when i do "feature lines from corridor" is following my existing grade instead of the top of my road. did i accid. change something? i need it to follow the top centerline of my road. the red arrow is the line i need at the top centerline.
View 3 Replies View RelatedI was wondering if there is a way that I can take an existing grade surface and apply a designed pond surface.
Right now I have the pond as a set of 3d Polylines in the proper geometry.
I want to place the pond into this surface and cut/fill at a 3:1 from that pond to the existing surface.
We are working on a road widening scheme where one edge of the road is retained as far as possible while other edge being widened. I like to design a retained channel line by extending the cross fall between the existing center line and the exiting channel line on to the design one.
It is possible in civil 3d to extend the gradient between two feature lines at some offset from reference feature line?
Because of i am using 235 graded steel for design,is it possible to change steel mild's grade (207 N/mm2) to 235 N/mm2?
View 1 Replies View Relatedi've got a profile with a lot of grade labels, some of which i've turned the visibiliy off. i need to turn some, but not al,l of them on.
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
I have labled for grade break on the profile, but it did not lable all break line? how to add grade breaks along the new profile (see attached image).
View 1 Replies View RelatedI am creating profiles and I can not get the existing grade linetype to show up as a uniformed dashed line. The layer is set up for a dashed line but the existing profile line is made up of too many nodes to make the linestyle look right.
View 9 Replies View RelatedI've got a drawing in which the existing ground is so jaggedy that I've got way too many grade breaks (see the attached image). I know I can use the weeding and eliminate the labels every 50 feet, or so, along the profile. But I need to have the ability to only show a specific grade break range. For instance, I'd like for my profile only to display grade breaks between 0% and 2% and not to display anything above 2%. I've tried making an expression, but have been hitting brick walls. I also know I can manually (use the CTRL + click) select the specific labels that I don't want and erase them, but I've got lots of these labels. Any LISP routine or an expression that can accomplish this? [URL]
View 9 Replies View RelatedI am xref'ing in a floor plan (provided by a client) & I need it to print at a lighter shade of grade. The information that I am adding will be on my own layers and will be darker.What I need is to change all of the various lineweights from the xref'd file to a single gray lineweight, but not change the linetypes. I have seen this done, but it was a long time ago, & it was with an older version of AutoCAD. For the life of me, I cannot recall how it was done. Any simple way to do this without phyiscally changing my original copy of the drawing.
View 3 Replies View RelatedI'm tryin to create an an elliptical wall. 6" Thick.It needs to go from 48" at one end and lower to 36" as it sweeps around the ellipse. (It's only an arc of the ellipse and not completely closed).
View 4 Replies View RelatedHow does one toggle a grade on and off within the timeline color corrector to check a correction?
View 4 Replies View RelatedI have a surface that I have done a slope analysis on and want to put a table showing the slope grades. I have made a viewport and would like to put the table in paperspace. However, when I zoom in paperspace and regen the table changes size. How or where do I keep the table from changing size. It wont let me scale it up or down.
View 3 Replies View RelatedHow I could create a label for the curb return grade as shown on the attached file. The label is on a curve.
View 6 Replies View RelatedWhen we created our fist C3D template in 2007 it was possible to make a grading criteria that targeted a surface at a fixed distance. In other words, the slope was variable. Looking at it again in 2013 it appears it's not possible to creat a criteria like that. Am I missing something? Or was that option removed? .....perhaps because it was too unstable?
View 9 Replies View Relatedi've got a profile band for my finished grade profile. it works great except for where a pvi falls at a major or minor station, the profile band is blank. is there a way to get the finished grade elevation to show in the band at a pvi?
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
I have a regular AutoCAD line in a profile view and wondered if there is a way of labeling the grade of the line. I'd think I could use and expression to calculate it. But I don't know how to automatically adjust for the vertical exaggeration without having to have a separate expression for all possible situations.
View 5 Replies View RelatedI had thought this would work with no problem. I know the elevation I need to start an arc at and an elevation at a point along the arc. I drew that portion of the arc and then extended the arc to a line where I need the arc to end. I had expected the arc to extend along it's current grade the way a straight Feature line would. But the end dropped to 0.
I undid the extension, listed the FL arc to get the grade, extended it again and used the Elevation Editor to set the previous grade. But why didn't the extension work? I checked for other FL in the site that might cause this but there were none.
I would like to grade and add grain to an Action Lens Flare separate from the rest of the comp. I thought I would be able to create an Output for just the Lens Flare Object and its matte but when I add that object to the output list it doesn't show up.
View 6 Replies View Related