I want to make slightly curved arch blur effect, but I can't figure it out how to.
Using radial blur, it needs huge canvas size so I don't want to take that.
Also I want to control arch angle manually.
I have a photo of a coffee cup on some wood with decent grain, but the exposure has blasted out some of the grain...I've done a passable job of adding in what could be taken for grain, especially if I blur it in a sort of DOF thing...
can I use a gradient to control this blur, as in no blur at one end of the gradient, to more blur by gradient's end?
I'm sure the answer is yes
How to represent a bottomless arch (arch span)? I can make a horizontal arch pipe, but I only need the top half. I also thought about building a corridor.
We do have a storm drain system running perpendicular above it and need to show the arch as a crossing. Corridor would work but I think I would prefer a pipe network-type solution.
I have some random curves (already created) and I want to blur them just from one side to have the same blur distance and effect one the whole curve.
To more precisely describe what I need, I need to create gradient with direction of normal for every "point". The best example I have found so far are borders in Civilization IV game. Here are two examples:
3.bp.blogspot.com/-40x9Kw5vrrA/TiHjTNwOuQI/AAAAAAAAADA/uw2NeAnsmOk/s1600/Civ4ScreenShot0008.JPG
apolyton.net/civ4/files/info-images/agade.png
As you can see, there is a solid curve, which gradually blends (i.e. alpha channel is lowered) till the gradient disappears. I have the solid curve and the question is, what would be the simplest way how to do this (the number of curves is around 100) gradient.
I just got PSE CS6 and the blur too will NOT work ....blur filters work, but not BLUR in the tools panel I have tried: unintstall/reinstall, updating, using it no a picture straight after opening it, duplicate layers, selecting an area and then blurring....flattening an image, every single different setting in the the blur tools menu bar NOTHING works. And everything I find about blur is the new blur filters....
View 1 Replies View Relatedi have outlined this pic and used the Gaussian blur , but how would i soften the edges of the blur so it doesnt look so "sharp"? I want it to kinda blend in so to say here is the pic.
View 7 Replies View RelatedHow do i arc some text, without going to the warp settings because thats too hard to work with, i need it to arc like aroudn a circle.
View 4 Replies View Relateda way (or filter) that will arch and image (say 9" wide x 4" high) like you can do with the arch type effect? The top and bottom would arch and the sides would flare out. The 3D distort filter doesn't do the trick without major playing and tweaking.
View 2 Replies View RelatedHow can I create such easy text arches?
View 1 Replies View RelatedHow do I arch text without any distortion? I'm trying to wrap text around a logo.
View 1 Replies View RelatedUsing AutoCAD 2013 and TOL command to generate feature control frames. We set our lineweights based on layer assignments.
Problem is that when printing, AutoCAD seems to randomly assign a lineweight to the feature control frames. It can vary from what it's supposed to be (such as lineweight set for the dimension layer) or thicker than even what the object lines are set at. Seems to pick a random linewieght at time of printing for these elements (just the boxes, not the symbols/text itself).
Is there a setting we should be defining somewhere to force it to follow the lineweight of the layer that it has been assigned to? Known bug?
I need to construct an arch in revit but Ive only been able to make a curved beam in the wrong plane. Whats the best way to make an arch so that it would look like a straight beam in plan view?
It needs to connect to ground level in two places and have a specific height if thats relevant.
So I've started to work on materials and lighting and a lot of tutorials show using the arch & design templates. problem is that i don't have any templates listed. the list is completely empty. Can i install these, or fix this? If its just a file missing, I'm not sure which it would be or where it would be at.
Max 2011 SP3.
I used BRUSHED STEEL, in Arch & Design, now I have to change the color of this material, from grey brushed steel into yellow/gold brushed steel!
Can this be done?
How to make an arch shaped door i have a box with a hole cut out i have create another two boxes for the left and right part of the door (joints) and attached them together then bridge them together. here is the problem i am working with a maya tutorial and on the bridge you can set the number of divisions but in max you cannot set the number of divisions.
Computer engineer, 3ds max freelancer
3ds max used currantly using max 9 (7, 8)
poser using 8 (5,6,7)
windows xp sp2
512 memory
40 and 80 gb hard drives
sis mirage 3 VGA Card
Asus motherboard
I am using AutoCAD MAP 3D 2013 32 bit version. In this, I can find connection with Arch GDB. But when I am going to connect it shows the error and the provided conection is for Arch GIS 9.3 only.
How can I get FDO for ArchGIS 10.0
How do i change my scale to arch?
View 5 Replies View RelatedHow to create the arch part of the dials, at least I think it would be an arch. With the top photo, the "arch" has 2 colors so I would need to have 2 layers, one holding one color and one holding the other color, but how to make them and I had no success with the "arc" tool.
In the second photo, it's very difficult to tell, but the left side of the arch is green and the right is a pale yellow so again, I think I would need two archs. The second photo also these tick marks that are at the top of the arch and again, how to recreate them.
What actually is the difference between the standard sheet eg ARCH D (36x24) and ARCH Expand D (36x24) sheet sizes? this have to do with printable margin areas?
View 3 Replies View RelatedI am using some A&D MR metal material in my scene and it is coming out transparent. The same is happening for any material that has a shine/reflection. It looks like a poor quality 'cloaking device' type effect.
I am rendering with Mental Ray using a bitmap environment background, daylight system and MR photographic exposure.
System information: Win7 x64 / 3DSMax Design 2014 SP3 / AutoCad 2014 SP1 Lenovo E30 ThinkStation Xeon E31225 Quadcore @3.10Ghz PNY GTX760 XLR8 2GB (334.89 Driver) 24Gb Ram Corsair 650w PSU
I can create a new drawing in Revit, save it to a flash drive, move it to a different computer. When I do this I go to open my drawing and I can see it in the preview but when I open it the drawing is blank.
View 1 Replies View RelatedI am using the student version of Revit and have desparately been trying to create a document that would print to scale. I use PDF creator to convert Revit to pdf, but it always comes messed up by an inch or so...insted of 4.6, it prints 4.75 (or the other way around). I tried formating my title block in many different ways, including deleting the outer lines. Nothing works. There is no Arch D format in the family of titleblocks. I am a complete beginner, just started using Revit a couple months ago, with no knowledge of CAD or anything similar. When I look at the PDF creator page of my doc, it shows that the doc has been properly sized, but when the print place prints it out, it is off by 1" or so.
How do I format my sheet so it prints to scale in format 24" X36"?
I just did a competition that required a garden. Lacking time to fully research Revit options, I ended up creating a topo and cutting paths into it by using building pads for the paths, requiring a lot of tinkering with the topo elevations. This was far from ideal because I wanted to alter things later, but it was just too labor intensive to do that and I ran out of time.
Any (cheap!) program that would work well for this? Something that could export a file that could be linked into Revit?
It would be very nice if a version of "building pad" could be created by Autodesk that would work as a sidewalk/path and that could also have a slope.
Another problem with this was that I had to position all the topo points along the path wall borders at a low elevation because the topo "bled" into the walls as it sloped up from them. Another great thing would be if Revit sidewalk pads could have borders that also "cut" topo.
I have dwg drawing sent to me with archstyle font or text. The archstyle is missing on my text format autocad 2012. How to downoad or import archstyle to my autocad 2012
View 1 Replies View RelatedI was given an arch length dimension and need to figure out the radius of the arch. I know the depth of the arch but not the width.
Is there a formula for figuring out the radius of an arch with a determined depth?
See attached pdf
I have a lisp program that creates a arch leader with a arrowhead on the end. All of a sudden the arrowhead does not appear on the end of the leader but out on space. Not sure what this is happening.
View 1 Replies View RelatedI'm having an issue where AutoCad Architecture 2011 is crashing on some but not all machines (4 total) when a file is closed.
We are also getting what appears to be random slow downs on files when opening and a jumpy mouse that makes drawing impossible. I have not been able to establish a pattern to point at specific files to being the problem as it happens across several the are fine one day, not fine the next and fine again a day later. All stations are identical.
Win 7 Pro - 64 bit
Intel Xeon cpu 3.60Ghz (2 processors)
9 BG RAM
NVIDIA GeForce GT 240
I need to insert a arch opening in a a wall. I dont have a opening folder under my door family. I tried to download openings from revit city but although i save it in my sampels file is is just not there.
View 2 Replies View RelatedI am attempting to create a jet engine blast on an aircraft which is following a arch path. The super spray rotates into an arch when parented to the aircraft in lieu of spraying straight out of the engine that it is attached to.
View 7 Replies View RelatedI need to put a 42 x 29 Arch Pipe in my drawing. I found a 44 x 27 in the elliptical arch catalog. But I can't get it to let me create one that's 42 x 29.
And I'm also having trouble making a label for it. This is one of three culvert pipes in this network. The other two are round 36" CMP. The label for those says XX' of 36" POLY-COATED CMP @ x.xx%. Once I need the label for this third pipe to show as XX' of 42" x 29" ARCH PIPE @ x.xx%.
When I tried to make the label style, I saw "Pipe Inner Diameter or Width". But I didn't see one for height.
I have some foreign drawings the block definition of "_ArchTick" has been changed to get a thicker tick in drawing's dimension. When I have new dimestyle and copy paste into the foreign drawings, it always use the drawing's block setting of "_ArchTick".
How I can paste a new dimstyle and bring in the block of "_ArchTick" to overwrite the one in current drawing?