I have white text on a yellow background...I need to change the background to white and the text to green. The rasterized text is part of the yellow background (ie it's not a seperate layer). Any attempt to change the colour or select the text invariably doesn't catch all the aliased pixels....with my resulting text not looking as smooth as the original.
View 9 RepliesI have applied a 3D>Extrude and Bevel on my text. Now problem is that when doing it, my border(part that is extruded) causes a color banding, since it rasterizes the gradients. See my image below.
How do I take away those nasty lines?
I'm fairly new to PS and I wonder if someone could explain this behavior:
I started out with black vector text and a logo in Illustrator. I rasterized it and saved it as an EPS. I opened the EPS in PS 7, specifying dpi of 600 with anti-alias checked. (I'm not quite sure why it then rasterized a file that was already rasterized, but that's another question).
On my screen, it looks great! I zoomed in close and the edges are nice and smooth. However, when I try to resize it to be smaller so I can use it on the web, it falls apart. The edges become very jagged and when I do Save to Web and put it on a web page, it is very fuzzy.
I've resized color images before for the web without this fuzziness. Am I getting this effect because it is black and white? I thought trying to resize it to be a bigger image results in poorer quality, not resizing it to be smaller.
Is there some technique I'm missing?
I have a set of images of complex text that has already been rasterized into pixels. My client would like the images transformed with a different background color and different foreground (text) color.
Just replacing the 2 colors of course does not preserve the antialiasing which provides the smoothness. And when I try hand-editing the aliased pixels it takes forever and always looks pretty bad.
Ideally there would be a way to transform the color schema globally so that the 2 foreground and background colors are changed as directed, and all "intermediate" antialias pixels adjust "accordingly". Does such a transformation exist -- can you specify a color transformation that adjusts 2 colors at once?
Or is there a more painstaking process of masks and such? I've tried several versions with masks, selects, feathering etc. but haven't found anything yet that gives professional antialias quality to the final recolored result.
When I make my text red (standard CMYK red) on a black background, it looks rasterized. (See image below)
I tried using different standard fonts, but result is the same. Aslo when I export it for high quality printing, the resulting pdf document also show the red text somewhat rasterized. (Does not appear smooth red).
I need to change the default text color to a pantone spot color.
View 5 Replies View RelatedNow, with that task simplified, I'm not sure how to change the color of the text created using this tool.
View 1 Replies View RelatedI have been sent a text logo in EPS format that I want to change to JPG or GIF. I need to change the text color. How do I do this please? I can change the format - it is changing the text color that is my problem.
View 1 Replies View RelatedI am using Photoshop elements 6.0, and I have a layered .psd file that is driving me crazy.
It's a black & white photo that I want to add colored text over the top,
but for some reason the text is only being displayed in gray-scale. Code:
when a want to change my text with filter a message apear ... it says this layer must be rasterized before proceeding .
what i have to do for my text change correctly?????
Using Photoshop CC on a Mac running the newest versions of everything and I am having trouble getting the eyedropper to work properly. I have a text layer selected and I've always been able to switch to the eyedropper and change the color of the text directly.
I chatted with Adobe support and they got me to delete my preferences folder. It worked after that the next time I opened Photoshop but then the next time, stopped working again. Delete preferences folder again and it works but after the first try it stops working every time.
My experience with Photoshop is self-taught. I use Photoshop 7 and am currently using a trial version of Photoshop Elements 12. I found an image of a rounded corner rectangle. I changed the background color to a shade of red (R102 B8 G0), and then created the word BLOG in white. The original image size is 487 x 487 pixels and looks great. When I resize the image to the icon size I want (30 x 30 pixels or 25 x 25 pixels), the red background color bleeds through parts of the text and just doesn’t look as good. What do I need to do to resolve?
View 1 Replies View RelatedIf there was a better way to handle changing the color of text or object as it goes over an underlying object.
Please see the attached file for an example and details of how I did it.
All I want to do is place white text (oh, one colored word) on a black background. I can't find a tool to make that happen.
View 3 Replies View RelatedI'm using Illustrator 6 on Windows with the latest SDK.My plugin changes the colors of paths and text.I have a single word of text specified as a spot color, it comes though in the code as a kTextFrameArt...I am using the following code to change the text color, but it has no effect,
//textArt is a AIArtHandle
ATE::TextRangeRef textRangeRef;
AIErr err = sAITextFrame->GetATETextRange( textArt, &textRangeRef );
if ( err == kNoErr ) {
}
[code]....
Is there a way to change the color of the dimension text?
I wanted to have the color of the dimension text different from the dimension line but couldn’t find where such option might be found.
I need to write some text in continuation in different color. I am not getting a way to change the color of some part of the text.
View 3 Replies View RelatedI attached some old PDF drawings and they are just perfect. The background is transparent and they really look pretty good. Is it possible to change the color of the pdf text?
Version: AutoCAD C3D 2010
I need it in 3 different colors, and 3 different fonts. So far when I try it doesn't work.
I can do the first word in one layer and open up a second layer for the next few words, but as soon as I start typing the second word, the first one becomes the color of the second word.
I have a large (22"x28") poster completely filled with 8 pt text. I have a simple image under the text. I want to change the parts of the text over the image to the image color. Basically, I want to make the image out of the tiny text and delete the image from the background. As of right now, I'm individually selecting text and changing the color, bit by bit. I know there has to be a much better way, this is going to take hours! I've been using AI for a very long time and this is one of the only times I've been completely stumped! I've included a sample image, the actual one is much more involved.
View 10 Replies View RelatedWhen I hover over a marker there's a text blub that pops up in the source monitor. The color is dark blue and it's difficut to see what the text says against some footage.
Is there a way to change the color to something lighter?
I have a large text with different letters and want to change the different letters with different color. for an example
RTKIFIRFPKTLFATEDALEVRRQSLATKIQAAWRGFHWRQKFLRVKRSAICIQSWWRGTLGRRKAAKRKWAAQTIRRLIRGFILRHAPRRTKIFIRF
PKTLFATEDSLEVRRQSLATKIQAAWRGFHWRQKFLRVKRSAICIQSWWRGTLGRRKAAKRKWAAQTIRRLIRGFILRHAPRRTKIFIRFPKTLFATE
DALEVRRQSLATKIQAAWRGFHWRQKFLRVKRSAICIQSWWRGTLGRRKAAKRKWAAQTIRRLIRGFILRHEPRRTKIFIRFPKTLFATEDALEIRR
QSLATKIQATWRGFHCRQKFLRVKRSAICIQSWWRGTLGRRKAAKRKWAAQTIRRLIQGFILRHAPRRTKIFIRFPKTLFATEDSLEVRRQSLATKI
QAAWRGFHWRQKFLRVKRSAICIQSWWRGTLGRRKAAKRKWAAQTIRRLIRGFILRHSPR
How do I select all the text and change the same letters to a selected color at once, I know how to change the color for a letter one by one, but it is too tedious.
In a project I'm working on I need to make the text have mirror properties. But when editing the text all i can choose from is "normal" colors.
So is there any way to make text use materials, like you do on normal surfaces?
I have created my own graphics from scratch with GIMP, but the resolution to this issue is eluding me.
I imported a GIF map and want to add red labels. I have no problem adding the labels, but I cannot seem to get the text colored red. Before I create the text layer, the text tool shows the color is red, but it still creates it black. All of the suggestions I've seen (yes, I've read the fine manual) reference the same things, including dragging the color from the foreground color (which I've also changed to red). Nothing I've tried seems to work. I've even saved the image as an XCF, but I have the same problem.
How to globally change text color to by layer in autocad 2008.
View 9 Replies View RelatedI am just starting to use Paint.net.
I cannot change the text color when I want to insert text on a picture.
How do I change the color of the text when I want to write on a photo?
View 3 Replies View RelatedI simply want to type the name of the website and change the first 2 letters to another color without having to do it in 2 separate words .
View 9 Replies View RelatedAs you can see when I drag the appearance swatch to apply it to the text. The text disappears and only comes back when I change color.
View 2 Replies View RelatedI've been having this problem for a while with Illustrator CC but not with older versions. If I use the eyedropper to pick up a color, it captures that color and acts like it is applied but object/text continues to stay the older color. With text I have to use the type tool, highlight all of the text, and then select a color. This process if very annoying when I need to highlight and change several text boxes at once. I would like to just be able to click on the object/text and use the eyedropper tool to capture whatever color I need.
View 6 Replies View RelatedIn attached file a.dwg, I use battman command to change text color inside the block. It did well for the color change part but get the text upside down as well. I am in 2010.
View 3 Replies View Related