I have created an action to embed a watermark. However when I run the action on multiple files I have to press Ok to embed the watermark for each file. How can I automate pressing the OK key so it just processes a whole batch?
View 3 Replies
There seems to be a bug in both Windows and Mac versions of Photoshop CS6. The problem manifests itself MUCH clearer on a Windows machine, but is present to some degree on a Mac, too. The last version without it seems to be CS3 (OpenSth problem?).
Steps to reproduce: Any image open, full screen mode, all pannels UNDOCKED: Correct behoviour: The image should not move while pressing Tab (ideally it shouldn't even redraw).
On Windows:
With every press of a Tab key to show/hide the panels the image jumps up several pixels (sometimes also towards the center of the screen if the image is smaller than the screen area). Also (and MUCH more annoyingly) when the image is moved off center and is at certain magnification (the most reproducible seems to be 33%) after pressing Tab it jumps ALL THE WAY to the center of the screen.
On Mac:
Similar things happen, but more rarely, and the image jumps by only ~1 pixel. (Easier to observe if you first zoom the image smoothly a bit by dragging with a zoom tool).
Also as it currently is (after CS3?) pressing F produces the same outcome as pressing Shift+F - there is no way of just showing the menu in Fullscreen mode and then quickly hiding it after use - one have to go through the whole screen mode cycle. Also on Windows there is no way to access the menu when hidden with Alt + Letter speedkey (Alt + F for file menu etc.). Both these functions worked perfectly well in CS3.
Both machines have latest Photoshop, OS updates and drivers (but old graphics cards: Win - Nvidia 9800GT, Mac Nvidia 880GT). I suspect these changes for the worse has been introduced while switching to OpenGL. Hopefully it is not necessary for it to be that way or maybe even it works as expected on newer graphics hardware.
Last time similar problems occured was, if I remember correctly, in Photoshop 7 when Status Bar has been moved into an image window :-) I know it may sound as if it's not important, but it certainly is annoying. It has nothing to do with not embracing change - I do find OpenWhatever to be a huge leap for Photoshop - even if I have to put up with a slower image redraw most of the time..
after opening mini bridge cannot open bridge after pressing enter?
View 3 Replies View RelatedWhenever I press CMD+S (which is supposedly a shortcut for a quick save on Mac) the Save As window always appear. I looked at the File menu and there's nothing wrong with the shortcut key. I also tried pressing CMD+SHIFT+S (which is the real Save As shortcut) and it works fine.
View 4 Replies View Relatedevery time i try to save a photo by pressing control S, another box then appears requiring me to push ok. very annoying. how do i disable this?
View 3 Replies View RelatedIn Photoshop, you can transform a layer by pressing ctrl while you click in the border of the object. I would like to do it on Illustrator CS6, is there anything like this tool available?
View 1 Replies View RelatedOn my Video Studio Pro 5 I have an annoying delay every time I press Play to preview.
I am sure that pressing this button is the most common thing people do and yet it's the slowest one. It takes 2-3 sec each time.
I have pretty fast new computer i5 overclocked to 4Gh and 8GB Ram and working with short (max 10min) 720p clips.
After I press "Space" to play a clip, there is a 12-second pause before the clip actually starts playing.
View 18 Replies View RelatedWhen pressing Enter/Return to commit a marquee selection the Feather box turns white for input (and I'm not trying to change the feather values)!?
Pressing Enter/Return should commit the selection but it doesn't why? I have not changed any short-cut preferences in PS CS6.
When I use the Marquee or Lasso tool and make a selection and I'm happy with the selection, I press the Enter (PC)/Return(Mac) and the the "marching ants" should disappear..this has always worked until today? Now, when I press the Enter key, the Feather box (next to the Anti-alias) on the upper left corner goes from grey to white and wants me to change the value?
How to duplicate the functionality of pressing the F2 button in .NET? I have several commands that write a fair bit of data to the command line, including one that lists individual segments of civil 3d objects and I would like to make the command line appear in a similar fashion to the list command.
View 3 Replies View RelatedThe problem is that I can't toggle Steering Wheels by pressing shift+W.
View 2 Replies View RelatedWhen I Zoom in my drawing on a specific area and press F3 to come to the previous zoom level it doesn't happen. inspite of this drawing will zoom out with another sequence.
View 3 Replies View RelatedI've owned X4 Pro for about a year and just now purchased X5 Pro/Ultimate. We use it for our voice over business, which on occasion needs to edit videos for very simple projects. VS seemed to fit the bill at its price point, but now I'm second guessing my decision.
The issue is the time it takes from hitting the "Play" button to the time it actually begins. I would have thought it to begin instantly. But instead it takes 2 ~ 3 seconds to start. It has been this way with both X4 and X5. Before you ask, it has been this way using the following setups:
Windows XP with both stock motherboard video and with Asus Geforce 210 (VS X4)
Windows 7 with both stock motherboard video and with newly bought MSI R6850 Cyclone 1GD5 Power Edition (both VS X4 & X5)
Types of videos used: every type of file extension I could get my hands on and every type of length (full length movies to a few second snippets).
how to write a code for pressing an esc button but in vba
View 2 Replies View RelatedI have created an "addin" to monitor the "SAVE" & "NEW" button press on Inventor.What is the possibility of AutoDesk including this feature to the next release, or better still, creating a "patch" so that inventor can be upgraded to do it automatically, without the need to write an "addin"?
For Example,
If the user presses the "SAVE" button, AutoDesk Inventor would automatically look to see if a macro called "OnSave" exists. If it does, it "runs" the macro, if it does not exist, it works exactly as Inventor does now. This also would work in a similar way when pressing the "NEW" button.
20 years using illustrator and for the first time, I don't know why but it suddenly became impossible to copy an object by dragging it while pressing "alt". And I've lost the dragging along the grid locking by maintaining caps pressed...
View 8 Replies View RelatedI am highlighting an area and at the last point where I press eneter expecting an area calculation, I get this message "specify next point or [A/L/U]; I don't want that I want the area
View 1 Replies View RelatedWe installed acad 2010 on a brand new computer with windows 7 64Bit.
Acad runs fine. Only frequently after closing a drawing the application crashes.
I've tried to reinstall acad but that doesn't fix the problem.
I am making an animation in Inventor Studio. I have created all my sequences for fading and constraint animations, and now I only need to move the camera around my assembly while zooming in and out with focus on the animations.
The way I have done it so far, is as following: Created a camera (Camera1).Set my view where I wanted the camera to start.Rightclick on Camera1 and set camera to view.Then go in a few seconds on my timeline, move my view to a new area and finally "Add camera action". I've done this a couple of times with success, but now I can't do it again.
As soon as I move my view to another area, and press "Add camera action", it does as intended, but now it zooms out, making the animated area small and hard to see. I want it to be zoomed in on a detailed area, but it's changing the view to the whole assembly.
To reproduce this bug, you must set the Command Line in the new semi-transparent style as featured in AutoCAD 2013. If it's docked in old-fashion like previous AutoCAD versions, the bug won't work.
When there's no command active, you have the following Command Line with the text "Type a command":
If you press the Escape key to cancel (weither you're in a command or not), AutoCAD focus on the command line with a bar sign and the transparent background turns white:
Now if you move the crosshair with your mouse in the drawing area, the Command Line bar sign will revert back to the "Type a command" text, which is fine.
But if the mouse cursor hovers the Ribbon region and you press the escape key, and then you click a Ribbon button, instead of executing the button's command/macro, the Command Line will simply revert to the "Type a command" text. So in the Ribbon area, if you want a Ribbon button to work, you must not have the bar sign in the Command Line. This gets annoying when you often have the habit of pressing escape while in a command and having the mouse ready to chose another command in the Ribbon.
My guess is that the new Command Line format in 2013 may have focus priority issues with other AutoCAD pallettes like the Ribbon. In AutoCAD 2012, the Command Line did not have a friendly "Type a command" message. So it probably has to do with this new implementation when AutoCAD decides when you have the "Type a command" text or the sign bar.
In CS6 when I enlarge a photo by pressing the spacebar I have got to go to 100% to get a sharper picture, is there anything I can do to get a better resolution photo without having to go to 100%
View 3 Replies View RelatedWhat is difference between Text Tool used for paragraph text with pressing left click mouse in x5 and inserting placeholder text in x6.
View 1 Replies View RelatedHow do I get my text from my TextBox1 (add text) by pressing my CommandButton1 (okay) to my active page or document?
View 1 Replies View RelatedWhat this automate function is in CS6 does? Under File-->Automate, I see a "Plug-in on new layer". However, when I click nothing happens..I am wondering if this was installed with another plug-in. What this does or how to use it?
View 2 Replies View RelatedI'm pretty new to PS, have used PSE prior to getting the whole CS6 package, so I might ask an obvious question to some.
I have a bunch of pictures, which I want to add 1.0 exposure to and maybe a few other adjustments.
Is there a way to make this automaticly to a bunch of files?
I have been looking at the automate and script menu items, but it is a bid hard for me to see ifvit is possible that way.
I have a one-time project of scanning hundreds of slides off a flatbed scanner and I'd like to automate what's possible. I've been filling the scanner surface with slides and scanning them into photoshop and I've found the scan and crop feature that does a good job separating the slides on the large scanned image into separate images. But, this would go a lot faster if I could automate the last step. Ideally I could just scan in a large number of images each consisting of many different slide images, and I could have photoshop process the files, producing the smaller images.
I feel helpless without a command line interface, though. Does photoshop have a scripting language? I'm only using photoshop for this one purpose so I'd rather not learn it unless it's based on a common language. Any suggestions to my specific file processing question, or how I'm going about the entire process ...
Is there a way to automate certain actions in Photoshop?
My most common task:
- select x by x pixels
- copy merged
- new file > from clipboard
- paste
- save as .gif (confirm the 3 dialog boxes)
Is it possible to express the scroll bar or other parameters with the automated pdf tool?
View 2 Replies View RelatedI am trying to setup a batch file. I am taking gif images with transparent backgrounds and wanting to convert. Need to flatten image, change mode to rgb and save to jpg. For some reason when I use the automate after recording, and I set source folder and destination folder, images sent to the destination are exactly the same as original, gif transparent? Nothing seems to be happening to the images?
View 2 Replies View RelatedI am producing some discount cards for a buisness and will place eight of them on to size A4 document, how can I divide the document automatically so that eight equal spaces appear repeated across the page. I have tried defining a pattern but did not work the way I wanted.
View 1 Replies View RelatedI keep getting this every time I record a action and try and play it back in automate:automate the command is not currently availabletried google not getting anythingim using 64bit photoshop cs4 adn win xp x64
View 14 Replies View Related
