I am trying to setup a batch file. I am taking gif images with transparent backgrounds and wanting to convert. Need to flatten image, change mode to rgb and save to jpg. For some reason when I use the automate after recording, and I set source folder and destination folder, images sent to the destination are exactly the same as original, gif transparent? Nothing seems to be happening to the images?
View 2 RepliesI'm seeing a strange issue when I automate an action in Photoshop CC (14.0). I have a simple action that does three things in this order:
1. Flatten Image
2. Convert to 8-Bit
3. Add some standard file info
When I run the action from the action menu it works fine. However when I have multiple images open and I want to run them all through the action using "Automate->Batch", it gets run in this order:
2. Convert to 8-Bit
3. Add some standard file info
1. Flatten Image
The same process in CS6 does not have the issue.
I was wondering if on Photoshop 7, CS5 etc, is there a way to automate a batch feature directly on an image from right click of the mouse? Example, I have an image that I want to change the canvas from 200x300 pixel to 500x500. Currently I have to right click, change image size than the canvas size. Looking to see if there is a way with one click of the mouse to run my batch feature that does this function.
View 1 Replies View RelatedUsing automate batch I get a save for web and devices error saying destination folder does not exist. I chose the folder by browsing, and it is a simple path on the c drive using a pc.
View 3 Replies View RelatedI tried to run an Automate batch action (to resize my photos) but it will asked me in the "Jpeg Option" folder for each file, which mean I am not able to go away and let Photoshop carry out the action by itself. It get annoyoed because I have to sit in front of my PC and press enter to each file resized.
View 1 Replies View RelatedI am converting tiff files to jpeg using the Automate then Batch Actions. I select my source folder and Destination folder. The program converts and send the jpegs to the Destination folder but it is also sending a copy of every jpeg to my DESKTOP. Nothing in my Destination folder shows the desktop as a destination. I set up a destination file on my e drive and it still sends the photos to the desktop.
I am using CS2 Photoshop.
When I first installed Photoshop and tried Automate to put watermarks on my photos, everything worked fine. I gave that a break for a few months and today was trying to watermark some new photos. Since then there has been a driver update for my AMD Radeon HD 7900 to the Catalyst 12.8 drivers. I have the latest Photoshop downloaded from the website.
Now when I try to use Automate and Batch, it starts then crashes abruptly. I've exhausted all efforts and have Googled for hours. I've tried uninstalling drivers to the 12.6 version of Catalyst, uninstalled Photoshop, reinstalled. Same problem. Under Performance, the Sniffer detects an error in the display driver. Some have suggested using software to sweep for old driver files. That's the only thing I haven't tried.
I know people had the same issue as this, but had to do with TWAIN but I don't have a scanner installed. I'm using Windows 7 64-Bit on an Intel Core i7-2700K
Here's the system info:
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 3500 MHz
[code]....
I'm running Photoshop CS5 on a PC with Windows XP pro, Core 2 Duo E4400@2GB, 4GB DDR2 RAM, MSI MS7350 Mainboard, ATI Radion X1050 Graphics card, 1 Analog LCD screen and one digital. I'm using an empty 1TB drive for a scratch disk.
My Photoshop CS5 runs flawlessly UNTIL I try to batch-process anything. If I go to File>Automate>Photomerge, no problem, but when I go to File>Automate>Batch, the second I hit Batch, I get an error message telling me that Windows has to shut down Photoshop. I never had this problem with CS4, which I never deleted and have to use when batching.
Photoshop SC5 Automate / Batch does not work at all, tells the program to close.The reason given, the program does not work properly, what's up??
View 5 Replies View RelatedI have been trying to a create a batch job and save the files with an extension ie:
picture1.jpg to picture1_s.jpg
I want to put an extension on the resised small images.
I can get the batch job to alter the dpi and sizes but I can't find a way to add a letter into the file name as above to differentiate the different sizes.
I'm trying add a watermark to approx. 8,000 images by batching the process. However, it only does about 400. The 2 errors that are logged are:
Could not complete your request because of a program error. (-1)
Could not complete the command because the selected area is empty. (-25570)
Here's a screenshot of the action that I'm using:[URL]...
I would like to remove a very specific bold yellow from some images. I want to automate this by throwing this into photoshop's automate tool and running over hundreds and hundreds of images. I have no problem creating the macro, the problem is that my image doesn't contain this yellow color (some of them do not), the 'select' action doesn't work so any subsequent actions fail.
What I have tried:
* Select the color and fill with white. If the color doesn't exist, the entire image gets filled.
* Select the color and cut, then replace background layer with plain white -- If the color doesn't exist, get error that 'cut' action isn't available.
* Force a yellow stroke somewhere on the image to try and remove it later -- Can't record brush strokes with PS!!!
Are their 'conditional' actions? There must be a way to do this, but I can't bring up anything on the web.
I may just be missing something here. If I open an image in photoshop and crop it, the image shows up at the new cropped size and I can then save the new image. I have 1000 people images with all different sizes but the same ratio. My hope is to create an action that crops a photo to a standard size and then saves into another folder.
So I started my new action and did the crop and saved. Then I ran this action using automate and batch. The processing does happen but the images are cropped and then remain in a black box the size of the original photo. This is a problem for me... I only want to see the resized photo.
I double click on <Set Layer style on current layer> and change to a new Layer Style for my Watermark Text. The <Contour> is Linear. The Actions panel turns red during editing.But when I run > Automate > Batch and select that edited Action, the <Layer Style> screen pops-up for each photo and the only way to finish the batch of photos is to click <OK> for each photo. I’m using Photoshop CS5. I have refresh Photoshop, restart my laptop but the problem remains.
I did another copy of the original Action and just changed the value in <Text Layer> and it works in the Batch processing. This problem only happens when I changed the value in the <Layer Style>.
So I have an action that I've been using for the past couple years (?) now that involves opening an image, applying an auto color and auto levels, saving and closing. This has been working for me since probably a couple years ago when I made the action. Yesterday, I was working on a scanning project where I have groups of images in separate folders. I ran the action on the first 2 folders which went fine.
When I got to the 3rd folder all the way up to the last one, PS just loads all the images, does the levels and color then fails to save/close them when done. On one of my folders, it gets through a few of them when it drops the ball and just opens all of them. I'm not sure what's going on as there's no real explanation as to why this is happening.. especially when I've been using this action (and I even made a new action with still no luck). Last week I had about 300 images I had to work with and PS decided to pull this move on me after doing the first 30 of them fine...which is when I first noticed this happening.
To further add, I set my action to show everything step by step and it seems to happen with select images (in some cases, these select images are entirely what is in the folder). With the select images, it is not doing the actions entirely in order. Typically it does it in this manner:
1-Levels
2-Levels
3-Save
4-Close
What I'm now experiencing is this:
2-Levels
1-Levels
(Skips 3 and 4 since it is starting at 2 and working upward).
I have created an action to embed a watermark. However when I run the action on multiple files I have to press Ok to embed the watermark for each file. How can I automate pressing the OK key so it just processes a whole batch?
View 3 Replies View RelatedWhat this automate function is in CS6 does? Under File-->Automate, I see a "Plug-in on new layer". However, when I click nothing happens..I am wondering if this was installed with another plug-in. What this does or how to use it?
View 2 Replies View RelatedI'm pretty new to PS, have used PSE prior to getting the whole CS6 package, so I might ask an obvious question to some.
I have a bunch of pictures, which I want to add 1.0 exposure to and maybe a few other adjustments.
Is there a way to make this automaticly to a bunch of files?
I have been looking at the automate and script menu items, but it is a bid hard for me to see ifvit is possible that way.
I have a one-time project of scanning hundreds of slides off a flatbed scanner and I'd like to automate what's possible. I've been filling the scanner surface with slides and scanning them into photoshop and I've found the scan and crop feature that does a good job separating the slides on the large scanned image into separate images. But, this would go a lot faster if I could automate the last step. Ideally I could just scan in a large number of images each consisting of many different slide images, and I could have photoshop process the files, producing the smaller images.
I feel helpless without a command line interface, though. Does photoshop have a scripting language? I'm only using photoshop for this one purpose so I'd rather not learn it unless it's based on a common language. Any suggestions to my specific file processing question, or how I'm going about the entire process ...
Is there a way to automate certain actions in Photoshop?
My most common task:
- select x by x pixels
- copy merged
- new file > from clipboard
- paste
- save as .gif (confirm the 3 dialog boxes)
Is it possible to express the scroll bar or other parameters with the automated pdf tool?
View 2 Replies View RelatedI am producing some discount cards for a buisness and will place eight of them on to size A4 document, how can I divide the document automatically so that eight equal spaces appear repeated across the page. I have tried defining a pattern but did not work the way I wanted.
View 1 Replies View RelatedI keep getting this every time I record a action and try and play it back in automate:automate the command is not currently availabletried google not getting anythingim using 64bit photoshop cs4 adn win xp x64
View 14 Replies View RelatedI have thousands of thumbs in where i would like to improve brightness sharpen etc automatically. I created an action that do it all and save for web in specific folder. But now i get a problem.
Name of thumbs have sizes 40-50 chars. So everything will be alright if photoshop didnt have some limits for save for web filenames, it cut my names to like 16 chars and overwrite all thumbs in gallery in 1 file
When i tried "save as" thumbs weight 3x mroe then initial, even when i tried low quality..
Is it any way to fast improve quality of thumbs that are all in different folders? The best thing would be if program could just overwrite thumb so there would be no problem but I don't know how to do it.
I would like to do it all automatically cause i have many galleries where i would like to change thumbs.
I am trying to automate - image processor. From open files i am just trying to save theese pdf's as jpg's. Should be straight forward but I get this error...
"There were no source files that could be opened by Photoshop."
I have to adjust some images so they get square. I.e. 220x220 px. I made a Action that works fine. But there is 2.000 images so I was making a droplet to automate the task. But when I use the droplet I get the following error:
Start Droplet
File: "/Users/Magooi/Desktop/My Droplet/"
Error: The object "Background" is not currently available. (-25922)
I use CS5.1 on Mac
I need to manually crop thousands of pics and want to semi automate the process. I assumed i
could create an action with a stop (at which point i would do a manual crop, because each
image is different) and then continue with the saving. So i opened an image, started
recording, immediately inserted the stop, resumed recording and saved. But when i run
file>automate>batch the first image opens and the stop dialog appears (with my message) and
the options to continue or stop. At that point (at the stop) it does not allow me to
manually crop. Why not? If i press continue it saves and then opens the next image..... If i
press stop another dialog comes up asking to continue or stop, i still cannot manually crop
and pressing stop at this second box stops the entire batch process. How can i get the
action to stop at each image so i can manually crop and then continue with the save and open
the next one? I thought this is what the stop function was for. A quote from the manual;
"Actions can include stops that let you perform tasks that cannot be recorded (for example,
using a painting tool). Actions can also include modal controls that let you enter values in
a dialog box while playing an action."
Sure, except that as usual from adobe, you either have to be a rocket scientist or a mind
reader to figure out how to make it do what you want to do. Anyone know how to do this?
I have 20 files that i need crop with same settings how can i automate that.
View 2 Replies View RelatedI'm working on a PC using CS2 and I have a problem with the automate and then web gallery choice. I've built web sites using Dreamweaver and have been using this feature in CS2 to build quite a few web galleries. The problem is after I go to Web Gallery and then check out the different choices in the drop down menu and say I pick "horizontal slide show" and pick the source and destination folders, colors etc. So it makes the slide show beautifully BUT....here's the problem. When you check out all the files in Deamweaver and see the individual pages for each photo there is on the left a place where you can type in title and description for each one. I type in all the information and save each individual .html page and then up load the whole thing with the index pages, thumbnails and all the pages for the photos. The problem is when I then go to view it in the browser the information I typed on the first slide is the only information that will show and it shows on all pages!
View 1 Replies View RelatedI open PS and place a platen-load of photos on the scanner.
Using HP Scanjet 7650 and Omnipage Pro 12 I scan making one bmp.
I close the scanner program and have my bmp opened in PS.
A. File, Automate, Crop and straighten results in 4 psd files.
sometimes one or more of the 4 are miscut by PSCS. I then have to go into the original composite .bmp and recrop just the one that was miscut.
B.Let's say you've got 10 individual .bmps.
How to convert all at once to jpegs of a certain dimension?
I have thousands of thumbs in where i would like to improve brightness sharpen etc automatically. I created an action that do it all and save for web in specific folder. But now i get a problem.
Name of thumbs have sizes 40-50 chars. So everything will be alright if photoshop didnt have some limits for save for web filenames, it cut my names to like 16 chars and overwrite all thumbs in gallery in 1 file lol.