I am converting tiff files to jpeg using the Automate then Batch Actions. I select my source folder and Destination folder. The program converts and send the jpegs to the Destination folder but it is also sending a copy of every jpeg to my DESKTOP. Nothing in my Destination folder shows the desktop as a destination. I set up a destination file on my e drive and it still sends the photos to the desktop.
I am using CS2 Photoshop.
I tried to run an Automate batch action (to resize my photos) but it will asked me in the "Jpeg Option" folder for each file, which mean I am not able to go away and let Photoshop carry out the action by itself. It get annoyoed because I have to sit in front of my PC and press enter to each file resized.
View 1 Replies View RelatedIs there a way to automate certain actions in Photoshop?
My most common task:
- select x by x pixels
- copy merged
- new file > from clipboard
- paste
- save as .gif (confirm the 3 dialog boxes)
I am trying to make an Action that will apply a set of various (yet specific) changes to an image, and then apply that Action to an entire folder of images. I have created the action and when run manually it work great, but when I apply it to Automate - Batch, there is a "bug".
Currently, the Action will take the image and set the layer to BG, then it will save the original to a folder. It then will resize the image to a set width maintaining aspect ratio, save that to another folder.
This all works great.
The last portion of the Action reduces the file to yet another width (maintaining aspect ratio), but it then applies a 1px stroke, and applies a dropshadow, at 120 degrees and 100 opacity. When I run the action on an individual image, this part works great, however when I batch this in a folder, all of the images get the dropshadow with a 30 degree shadow. Everything else works fine. The default settings for a shadow are 120 degrees, so I cannot figure out where this 30 Degree setting is coming from.
Any help would be appreciated. I dont know if anyone will be able to read my action, but I will try to attach.
I just "upgraded" from Photoshop CS6 to Photoshop CC.
How do I get all my apps, plug ins, actions, automate apps, brushes, etc. from Photoshop CS6 onto/into the proper folders in Photoshop CC so I can use them in CC?
My OS is Mac OSX 10.7.5.
I am trying to setup a batch file. I am taking gif images with transparent backgrounds and wanting to convert. Need to flatten image, change mode to rgb and save to jpg. For some reason when I use the automate after recording, and I set source folder and destination folder, images sent to the destination are exactly the same as original, gif transparent? Nothing seems to be happening to the images?
View 2 Replies View RelatedI'm seeing a strange issue when I automate an action in Photoshop CC (14.0). I have a simple action that does three things in this order:
1. Flatten Image
2. Convert to 8-Bit
3. Add some standard file info
When I run the action from the action menu it works fine. However when I have multiple images open and I want to run them all through the action using "Automate->Batch", it gets run in this order:
2. Convert to 8-Bit
3. Add some standard file info
1. Flatten Image
The same process in CS6 does not have the issue.
I was wondering if on Photoshop 7, CS5 etc, is there a way to automate a batch feature directly on an image from right click of the mouse? Example, I have an image that I want to change the canvas from 200x300 pixel to 500x500. Currently I have to right click, change image size than the canvas size. Looking to see if there is a way with one click of the mouse to run my batch feature that does this function.
View 1 Replies View RelatedUsing automate batch I get a save for web and devices error saying destination folder does not exist. I chose the folder by browsing, and it is a simple path on the c drive using a pc.
View 3 Replies View RelatedWhen I first installed Photoshop and tried Automate to put watermarks on my photos, everything worked fine. I gave that a break for a few months and today was trying to watermark some new photos. Since then there has been a driver update for my AMD Radeon HD 7900 to the Catalyst 12.8 drivers. I have the latest Photoshop downloaded from the website.
Now when I try to use Automate and Batch, it starts then crashes abruptly. I've exhausted all efforts and have Googled for hours. I've tried uninstalling drivers to the 12.6 version of Catalyst, uninstalled Photoshop, reinstalled. Same problem. Under Performance, the Sniffer detects an error in the display driver. Some have suggested using software to sweep for old driver files. That's the only thing I haven't tried.
I know people had the same issue as this, but had to do with TWAIN but I don't have a scanner installed. I'm using Windows 7 64-Bit on an Intel Core i7-2700K
Here's the system info:
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 3500 MHz
[code]....
I'm running Photoshop CS5 on a PC with Windows XP pro, Core 2 Duo E4400@2GB, 4GB DDR2 RAM, MSI MS7350 Mainboard, ATI Radion X1050 Graphics card, 1 Analog LCD screen and one digital. I'm using an empty 1TB drive for a scratch disk.
My Photoshop CS5 runs flawlessly UNTIL I try to batch-process anything. If I go to File>Automate>Photomerge, no problem, but when I go to File>Automate>Batch, the second I hit Batch, I get an error message telling me that Windows has to shut down Photoshop. I never had this problem with CS4, which I never deleted and have to use when batching.
Photoshop SC5 Automate / Batch does not work at all, tells the program to close.The reason given, the program does not work properly, what's up??
View 5 Replies View RelatedI have been trying to a create a batch job and save the files with an extension ie:
picture1.jpg to picture1_s.jpg
I want to put an extension on the resised small images.
I can get the batch job to alter the dpi and sizes but I can't find a way to add a letter into the file name as above to differentiate the different sizes.
I'm trying add a watermark to approx. 8,000 images by batching the process. However, it only does about 400. The 2 errors that are logged are:
Could not complete your request because of a program error. (-1)
Could not complete the command because the selected area is empty. (-25570)
Here's a screenshot of the action that I'm using:[URL]...
I would like to remove a very specific bold yellow from some images. I want to automate this by throwing this into photoshop's automate tool and running over hundreds and hundreds of images. I have no problem creating the macro, the problem is that my image doesn't contain this yellow color (some of them do not), the 'select' action doesn't work so any subsequent actions fail.
What I have tried:
* Select the color and fill with white. If the color doesn't exist, the entire image gets filled.
* Select the color and cut, then replace background layer with plain white -- If the color doesn't exist, get error that 'cut' action isn't available.
* Force a yellow stroke somewhere on the image to try and remove it later -- Can't record brush strokes with PS!!!
Are their 'conditional' actions? There must be a way to do this, but I can't bring up anything on the web.
I may just be missing something here. If I open an image in photoshop and crop it, the image shows up at the new cropped size and I can then save the new image. I have 1000 people images with all different sizes but the same ratio. My hope is to create an action that crops a photo to a standard size and then saves into another folder.
So I started my new action and did the crop and saved. Then I ran this action using automate and batch. The processing does happen but the images are cropped and then remain in a black box the size of the original photo. This is a problem for me... I only want to see the resized photo.
I double click on <Set Layer style on current layer> and change to a new Layer Style for my Watermark Text. The <Contour> is Linear. The Actions panel turns red during editing.But when I run > Automate > Batch and select that edited Action, the <Layer Style> screen pops-up for each photo and the only way to finish the batch of photos is to click <OK> for each photo. I’m using Photoshop CS5. I have refresh Photoshop, restart my laptop but the problem remains.
I did another copy of the original Action and just changed the value in <Text Layer> and it works in the Batch processing. This problem only happens when I changed the value in the <Layer Style>.
I've been looking for this one a long time, but I just don't get it to work properly. The problem is this, I need to save a whole lot of pictures into jpeg in my PS file. But the time it takes me for selecting every one of them and pushing ctrl shift s, then inputting the number and save as jpeg. Is driving me horribly insane.
So I looked up some things on google, but that didn't help, thus I landed here. I know you could do this with the automate - batch command but I simply don't get it to work. Using the action command doesn't help either, it saves the picture but always overwrites the former one (since it always saves with the same name)...
Whenever I try to run an action or use batch I get an error message that Photoshop CS 5 will now close. What if anything can I do? I am running XP. There are actions in the plugins/actions folder. The actions tab contains my actions and the original ones.
View 4 Replies View RelatedI can record a batch action but when I try to apply it to opened files or folders, the batch window doesn't even appear and all the photoshop menu options are frozen and greyed out. I have to force quit the program to recover. This started happening last week and there was no updates or any other changes made to the computer or software. I have tried to delete the preference files and repair permissions and restart the computer, but nothing works. It happens every single time.
View 9 Replies View RelatedWhen I try to do a batch action, the only action set offered is ONE "default set". Which has vignettes, molten lead, gradients, etc. I need to batch process a a folder of .pict images to .jpg
It's been a long time since I used the batch feature, but I have done this process in the past (maybe years ago).
What has happened to my action sets or how i might restore them? I poked around in Time machine, but don't know enough about where to look.
Photoshop CS3 Extended 10.0.1
I made an action that opens, resizes, saves and closes files. I loaded it into "file>automate>batch" and designated both source and destination folders(which are different). For some reason the batch processed files are not saving to the designated destination folder specified in the batch gui.
How can i correct this?
I posted this in the Mac forum but received no responses after a couple of days, so I am trying it here. Photoshop CS3 Actions seem to have a bug such that when used in Automate > Batch mode it will use the name of the first file opened in the batch session for every file processed in that session. Since that name is used in Save step, this means having to deal with the "File Already Exist" dialog for every file in the batch because it is attempting to save at the designated location with the same file name. If the continue option is chosen each time, the final result is one file with the first opened file name, but with the contents of the last processed file. To confirm that this is a problem particular to the opening step, I have disabled all processing steps as well as the saving step by toggling them in the Actions panel. I then ran the action in batch mode on a folder containing 4 files. This resulted in 4 opened files all with the same name but different image content. This was with the "Override 'Open' Action Commands" checked/not checked, and the "Suppress File Open Options Dialogs" checked/not checked. The problem described also occurs when using a Droplet. By comparison, Photoshop CS exhibits the expected behavior: when an action is used in batch mode to process an entire folder of files, the name of each file is retained after opening and used after processing in the save or export step. The above described behavior of CS3 is a change acquired along the way to the CS3 version (I do not have the CS2 version to test). But more importantly, can someone please report if the CS4 version behaves as I described for CS3, or if it has been returned to the CS behavior? OS X 10.4.11G4 800 MHz 2 MB L3/processor 1.25 GB SDRAM Is this a known bug?
View 21 Replies View RelatedI Can't run batch actions. I'm trying to run batch actions from the file browser in CS and it say it can't because the "Disk is not available". I made sure my scratch disc was designated, and it has my primary partition as the 1st and the other partion is the 2nd. The files I'm working from are on the same partition as the System files and there is 15gb available.
View 3 Replies View RelatedI have a number of actions under the automate/batch menu item that are on a win2k machine with 7.0. I want to migrate them to an xp machine with cs3. I can't boot the machine with 7.0 on it but I do have complete access to the disk (long story of another problem).
I cannot figure out where they store them. I've seen the .atn file but they just seem to be standard default files. So what I want to do is to get them into cs3 without having to redo the dozens of actions by hand. It's sounds easy (and I'm sure it is), but in my searching, I'm coming up with nothing. Ideas?
Up until a month or so ago, using photoshop CS5 - windows, a batch psd conversion of nummerous files say fred1. psd through fred10.psd gave me fred1 jpeg through fred10.jpeg. I saveconversions to a dump jpeg folder on another drive where there are also, dump psd and dump tiff with tiff not being much used.
Using actions, the first conversion of a series will be fred.jpeg but thereafter it will be fred1 copy.jpeg through fred10 copy .jpeg. No big deal for a few files as the word copy can be deleted. However, if a jpeg file say fred.jpeg needs to be updated in say a slide show or web site then the new conversion of the updated file as fred copy.jpeg causes identity problems.
how can I return to the situation where fred.psd becomes fred.jpeg and not fred copy.jpeg. This does not seem to happen for individual conversions the manual way. I tried to convert to jpeg 2000 but the same happened. I'm not sure about jpeg 2000 and how it would work if taking to a phot processor for "photographic" prints.
I've got to submit about 130 images in JPG form to the media department by 1 o'clock today EST.
Basically, this is my setup up in PS CS5. I have a simple graphic (a black decorative border) in its own layer. Below this, I have a mask so that the images below it can peek through the decorative border. The sample below only has 1 image, but in my actual document there are about 130 layers under this mask, each with a different image.
I have to export every single image as a JPG. Not all the images are the same size so I have to turn off all layers, and leave only the layer being exported visible every time.
Is there anyway I can batch this? I don't see how can PS turn on/off layers automatically as it exports.Or how could I have done this differently for future reference?
Is there a way I can perform an action to similar images?
For example, lets say I have one big circle, and another circle that's smaller. Is there a way I can resize the two circles so they scale together?
Goes the same with colors. Is there a way I can apply the same color effect to multiple layer images at once? Or do I have to go manually one by one if I want to change something?
I'm trying to resize and save a bunch of .bmp pictures.
I tried tinkering with some options, but couldn't get it to work any faster than doing each one individually. I think I'm going about it all wrong...
Is there an easy to way to import all the pictures at once, change the Image Size and then save as a JPEG in a new folder?
I'm using Photoshop CS2.
Is there any way to use Actions in Batch Editing in Photoshop Elements 10 or any Elements?
View 1 Replies View RelatedIs there a way to automate repetitive actions such as file size and file saving to the same folder?
View 4 Replies View Related