I'm cropping a bunch of horizontals to verticals, but how I do match the 2nd, 3rd, after the 1st one I do? I can't figure it out. I made a tool preset after cropping the 1st, but it does not work. Appearantly crop tool needs you to enter the numbers before hand --
I could crop, then screenshot the new settings (very cumbersome) and then enter that im for a new tool preset.
When making a profile the actual scale of the profile does not match the vertical text. The scale is 1"=40' hor and 1"=4' ver with a 10:1 exageration.
See sketch below
I have created city/landscape artwork using photoshop line and box tools. If you go to URL... then click on the link that says (click here to view Gotham City) you will see one of the images I am talking about. Can this image be made to look the same in vector.
View 7 Replies View RelatedI have been using Elements 8 for some time and recently purchased an ASUS monitor that is at home in both vertical and horizontal modes. Can I change the Elements 8 format to work in a vertical format to accommodate the larger size possible with a vertical image. It is difficult to manipulate the functions in Elements when the mouse is working in a horizontal mode and you are viewing a large image in a vertical format. If the format of the Elements 8 software can be changes to vertical, any protocol (directions) to accomplish this?
View 2 Replies View RelatedMy crops are moved around once a folder is reopened after cropping dozens of images to that folder.
Should I crop each individual image, then "Save Image" or click "Done" after cropping each individual image?
Should I crop all images, individually, "Select All" images, then "Save Image"?
Should I crop all images individually, "Select All" images, then click "Done"?
Should I crop all images individually, leaving the last icon selected, then click "Done"?
I need to crop arbitrary shapes (e.g. triangle, star, hexagon, etc.) out of a series of pictures. The number of pictures is relatively small (less than twenty), and I will have to manually select the area to be cropped. But, I don't see how I can crop to, say, a hexagon repeatedly. What I would like is a cookie cutter so I can simply size the shape and then stamp it out.
View 1 Replies View RelatedPE11 crops as it prints pictures. Why? I use 4x6 paper to print. When PE11 shows the thumbnail on the preview screen prior to printing the whhole picture is there. But the output shows cropping which spoils the composition of the picture I took. I tried fooling the system by saying that Iwas using 3x5 paper and the whole picture was there but of course there was lots of white space around it. What can I do to get ariound this problem using 4x6 pper?
View 4 Replies View RelatedAfter i edit photo in elements 8 then close it,save it, it then crops itself... When i open it again about a fourth of it is gone from the bottom. What has gone wrong? It is all the photos i did (5)
View 1 Replies View RelatedI just went through and cropped a bunch of images as a 5x7. When I re-opened the images to put our studio logo on them (using an action) the images are a similiar ratio to the 5x7 size that I cropped the image, but they are not actually a 5x7 so my action no longer puts the logo in the correct place on the image. Is there a way to get the crop tool to not give me a ratio but actually size the image to the size that I input into the boxes? I don't want to have to re-do all of my logo actions to fit the ratios.
View 2 Replies View RelatedMA.JPG
why i can't not match properties (MP) multileader texts, as you can see on the pic, i want the Mleader text on the right to be the same size as on the left, they are in the same layer, same mleader style but when click MP to match with the one on the left, nothing happen?
While using the 3D extrude and bevel tool, specifically the isometric preset from the position drop down menu. I am noticing that when I expand the shape (in this case a perfect cube), the vertical paths are not exactly perfect, and are not truly vertical, but off slightly. Is this something that can be fixed or adjusted in the settings, or is this how the tool works?
View 4 Replies View RelatedI currently use Mep 2012 although my question I believe is general in nature. As a sheet metal contractor I do drawings that have many different entities at various elevations. Many times I use change propeties to match the propeties of on entity like a linetype to change another. What I really need to do is have the ability to use a similiar button and match or change the "Z" elevation of a specific entity just like I do for linetype, color etc.
View 2 Replies View RelatedIn gimp I have imported an image. I then duplicate the image four times (I am trying to make four different crops of the same image). But every time I crop one corner of the image, it automatically crops ALL OF THE OTHER DUPLICATES TOO!!!! I have tried just importing the same image four times as individual layers, but that doesn't work either! Why does one layer affect all of them?!
View 4 Replies View RelatedIn the field I work in photoshop and save my images as a DNG on my laptop and when I return from assignment I import the DNG files into lightroom to keep as an archive. Worked great for years but for some reason I'm now losing the crops on the images when I import.
View 3 Replies View RelatedI've been editing a piece recently that requires me to do a lot of green screen keying, I've just started out using premiere and whenever I finish keying something and then force rendering it, it cuts my peice in half at a slight angle and no matter what I tweak it doesn't change.
View 3 Replies View RelatedWhen Rotating or Resizing an image I have recently run into an issue. This is new behavior so I think I either have something set incorrectly, or it came in with a recent re-install.
When Rotating or Resizing, and setting Clipping to Adjust, it always Crops the image.
In other words: If I were to attempt to stretch an image bigger than 1000x1000 to say 1500x1500 it appears to do all the correct calculations, and does stretch the image, but anything outside the original 1000x1000 disappears.
Likewise if I were to attempt to rotate an image that were say, 1000x1500, 90°, I would end up with a rotated image 1000x1000 in size, and transparent/background for the balance of the original 1000x1500 sized image.
I've tried uninstalling/reinstalling (it remembered all my settings, so I don't know how much good this might have done), setting the Clipping option to Clip, then Crop and back to Adjust again (also with no result).
who has lightroom 5 tell me if its possible to remove the in camera crops from a 5d mark III? It wasn't possible with 4.4 without a plug in that I couldn't get to work anyway.I've shot two jobs before realizing the information was gone once imported.
View 2 Replies View RelatedI've cropped photos in lightroom5, but suddenly the crops are not being applied when I export them. As in the past, if I've made changes in develop mode, I would like those changes to be applied when exporting them from lightroom.
View 3 Replies View RelatedWhen I create a document on CD x6, I make it look just like I want it (some background showing around edges, under main content), but when I export it to an image file, it always crops it to the smallest possible size. Why is this, and how can I fix it?
See images below... 1st is what it looks like in CD, and 2nd is the exported image
Is there an easy way to crop a dozen pictures so the image is in the same place? I kept the camera as still as possible but there's inevitably a bit of jumping about. I've tried calculating x and y distances from a fixed point but it doesn't ever seem to work. And can you control the cursor position from the keyboard? It's soooo difficult to get accurate pixel position using a mouse.
View 1 Replies View RelatedMy custom artboards no longer crop graphics properly. Instead of a specific targeted crop area, it just creates a jpg or png of ALL art on displayed layer. What did I turn on or off? Yeah, exporting the graphics works, but I want to control the final image size and preview too. What happened?
View 3 Replies View RelatedIllustrator incorrectly crops artwork too small by a few pixel when using Save for Web or Export. If you fit an artboard to your artwork, either manually using smart guides or by using the "Fit to Selected" command, it will look correct in the work area but when you go to Save for Web it will be noticeably truncated on the right and bottom sides. If all the artwork is supposed to be within the artboard then toggling "Clip to Artboard" will actually change the size of the exported image by 1 or 2 pixels when it shouldn't change at all.
View 2 Replies View RelatedIn LR 4, I have created a virtual copy for the purpose of cropping, but when I crop it in Develop, the original image is getting cropped as well. Have I misunderstood something?
Mac OS X 10.6.8
I choose the vertical type tool or the vertical type on a path tool or the vertical area type tool...and all I get are letters that are rotated 90 degrees clockwise that go down in a vertical line. The effect is the same as if I took one of these lines that I am typeing here and rotated the entire line 90 degrees clockwise. That is not the effect I want. I am tying to get vertical letters stacked on top of one another in a line going vertical. I watched videos and they simply pick the tool and it functions this way, but when I pick the same tool I do not get this vertical orientation of the individual letters, but the 90 degree rotated letter.
View 5 Replies View RelatedI was wondering, how was the text created in this image?
I really like the streaks/lines that go accross it but am not sure how it was done?
to making Gifs, but just took some black text, made bg transparent, changed resolution from 300 to 72. text is huge so have to make it smaller with bicubic resample. but then text looks very jagged and awful,
View 2 Replies View RelatedI make brushes for sale. I make versions vor CS2+ and I make larger brushes for CS6+.
I think I should probably make the brushes in CS6 to be good for CC and CS6, but thought I'd ask if it's possible to just make them in CC. Would save me having to keep CS6 on my computer.
How can I transfer Actions I have made from CS5 to CS6?
View 3 Replies View RelatedI do quite a bit of Photoshop work but it is simple. I am trying to re-create the look of this image but struggling on it. I did some that were close but the look was off.
The black layer is added in, any tips on how it is done and what tools are used to go around the relief so well?
for some weird reason all of a sudden the adjustments I make to my images in ACR are not carrying over when I open them in CS5. I've cheked the Adobe website to make sure I have the latest versions of both ACR & CS5 & I do. Any thoughts on how I can correct this? Very frustrating to adjust 10 - 15 wedding images in ACR then they're right back to the original image when I open them in CS5.
View 11 Replies View RelatedWhen I save photoshop documents on my Mac they are unable to be opened on windows. This happens roughly 60% of the time. The only way I have learned to resolve this problem is to create a new photoshop document, copy all of the layers into this new document, and save it again. The Mac is new - about three weeks old. We save all of our files on an external harddrive backed up on the Mac. All of our computers run CS6.
View 21 Replies View Related