I just started getting this message when restarting CS6. "The procedure entry point onpreview ViewSet Vram usagehint could not be located in dynamic link library onimaging.dll". How can this be corrected?
View 2 RepliesI'm having a really strange problem with Photoshop CS4 on my Laptop. If my Laptop was recently booted and I start Photoshop everything is fine. If I'm working for a while, suddenly nothing works anymore. Or maybe I should say: It works but only if I'm trying it like 10 times.For example I'm trying to open a file. I click "Open.::" choose the file, double click it, nothing happens. Repeating that won't help too. Only if I'm repeating it again and again it will open sometime. (There is no exact count that I need to reach repeating that steps. Sometimes it works after 3 times, sometimes much later).That happens with everything in Photoshop. If a file is still open and im using the brush tool to create a line or something, I click somewhere in the image, keeping my mousebutton pressed, move the mouse to somewhere else (to create a line/whatever), release the mousebutton and the line disappears. Nothing happened. Now if I'm repeating that again and again, there will be a line anytime. Now nothing helps to get that problem away but restarting my PC. After booting it again everything works fine again, but restarting it again and again isn't really a solution to my problem. The specs of my laptop:CPU: Intel Pentium M 1,86GhzRam: 1 GB RamGraphics: Mobile Intel 915GM Don't know about the rest, but that shouldn't matter anyways. The only thing I could think of is that my Laptops components are too bad, but theyre pretty much exactly matching the requirements.
View 15 Replies View RelatedI'm trying to batch convert groups of photos to b&w. The action i want to perform involves 3 steps: 1)channel mix to b&w, 2)stop to do curves, dodge/burn,etc. and 3)finish b&w convert w/ hue/saturation. If i insert a Stop then PS does allow me to finish the action but it stops the batch. I need to do the Hue/Sat after adjustments b/c otherwise i get a color shift. If this makes sense,
View 6 Replies View RelatedI can't open Elements 10 once I have closed it down without restarting my computer.Â
View 5 Replies View RelatedI just downloaded the videostudio X6 trial version. For some reasons, some sequences from mpg clips I added to my project seems to be repeating itself for no reason. The bug occurs within a unique sequence and might change the "restart" position while the timeline cursor.
Ex: Original video = Cow cross the road, a car hit the cow then the car explode and finaly a generic
After importing the original video = Cow cross the road, a car hit the cow then the car explode, then the car hit the cow a second time
If I move the cursor right to left a couple of time, it might end up missing the first part of the clip where the cow is suppose to cross the road (replaced by a second car exploding)
It's a single clip and the final display is changing even if I don'T touch anything. I use to be a Ulead video studio user and I never had such problem.
I got a few render boxes, the older ones (mix of XP and win7) are generally fine.The new machines however fall over (crash with `unhandled exception`) while network rendering through backburner. This has the effect that 3dsMax `hangs` i.e waits for you to remote login and click `cclose program` (this may be a windows message though)This effectively removes the machine friom render slave mode as it hangs until max is manually closed.
Either i need to find out why they`re crashing and stop it or a way to make max crash and auto shut down/reboot max/backburner or even a machine restart would do.
(again, the error is ridiculously vague. windows 7 64bit is up to date as is max2011).i just checked and it`s windows thats crashed, asking to sened info to microsoft.
For some odd reason Autocad will not maintain my workspace customizations. For example I typically can customize my workspace by toggling which toolbars are shown and where they are placed. Then I can close autocad and when I start it again all the customizations are present. Now when I start autocad it loads the default workspace. I should have to customize my workspace every time I start autocad. I also shouldn't have to create any custom workspace profile or anything like that. AutoCad used to simply save any GUI customizations made automatically. I need it to get back to that.
View 9 Replies View RelatedWe use tags on lines labeled L1, L2 etc... for roads and pipelines (for legal/right of way purposes). We may have multiple lines to describe (differernt section/land owner) and need to start back at L1.
Is there a way to automatically start back at L1 rather than it starting at a higher number and having to reset the number one at a time? Get's quite tedious when you have multiple lines needing number with say lay 20-30 segments.
I have posted an image which is a screen snap of a revit session. Not sure how it got this way but we are unable to figure out how to reset it without restarting the program.
View 4 Replies View RelatedI'm running Photoshop Elements 5.0. Everything was working fine til this mornin. I've had the program for about a year now. When I tried to open it this morning I got this error message that popped up.
It says:
Unable to continue because of a hardware or system error. Sorry, but this error is unrecoverable.
I've tried repairing the program. That didn't work. Restarted my computer. That didn't work. Uninstalled the program and tried opening it again. That didn't work. I'm at a loss! I really need to get into my program b/c my work is there. I tried opening some of my files (they are located in my Pictures folder) and they pop up with the same message.
This evening I switched on and tried to load PS2.
The following pop-up appeared.
'An error has been detected with a required application library and the product cannot continue. Please re install the application.'
I've deleted CS2 and re installed but with no success, just the same error.
When I use the quick selection tool (or when I use content-aware scaling) I get an error message saying "could not complete your request because of a program error." I am working with NEF files, 4 GB of RAM, fast machine with plenty of scratch space, Radeon X1950 crossfire graphics card. With small .jpg files, the problem doesn't occur.
View 4 Replies View RelatedIn Elements 9 I now get an error message "Cannot use Clone Stamp due to program error".
View 1 Replies View Relatedso i recently restored my computer back to factory settings .. so my computer doesnt even have any new downloaded app .. i download photoshop cs6 now im getting scratch disk errors ..which i dont see possible if my computer doesnt have anything on it (besides what it came with) my hard drive has 276 gb i only used 33 . i made an external hard drive and that has 8 gb ... also its moving very slow .. also its telling me i cant make an new canvas size 1920 x 1020 with an resloution of 300 .. im using windows 7 Toshiba
View 3 Replies View RelatedI have Photoshop 7 installed ands till recently it was running fine but from just day before yesterday I cannot use the filters. Whenever I try to use it it says "Cannot complete action due to error in Module Interface", I have also tried by reinstalling photshop but it doesnot work.
View 2 Replies View RelatedI am getting a Could not open due to unexpected end of file error messages on a bunch of jpg's I am receiving via email. The files open in Microsoft Office Picture Manager.
View 2 Replies View RelatedIve been trying to install Adobe Photoshop CS4 trial for the past 3 days. The only reason I want to try it is because of its ability to create textures directly on models. But whenever I try to install, I get this error"Adobe Drive CS4Error:Error 1603. Fatal error during installation." Dispite it not saying that Adobe Photoshop CS4 having an error, I still get this screen ....
View 5 Replies View RelatedI have just installed Photoshop CS2 on my new win VISTA HOME machine. There was no problems, I got a notification of a large update from ADOBE,
so I accpeted, shut down Photoshop, installed updates and then when I re-boot my machine and opened up Photoshop again, I got this error message. "Unable to continue because of a hardware or system error. Sorry, but this error is unrecoverable"
I'm trying to create a digital layout in PSCS version 8.0, and when I go to save the psd file (very early stages of the creation...its not very large yet) I get an error that says "Unable to save (file name) because of a disc error". I've never seen this before and am trying not to panic, but I'm on a deadline! LOL And am running behind as usual!
I am using an older mac, and I'm pretty dang maxed out on Gb...gotta clean up some files, but having a hard time finding a free dup file finder for macs...so I'm procrastinating, basically. Could the fact that I've got very little Gb available left have something to do with this?
I tried using the cloud tool and I got this error:
"Could not complete the clouds command because of program error."
I tried resetting the computer and still nothing.
I try I open PhotoShop I get a message saying "Unable to conitnue because of a hardware or system error. Sorry, but this error is unrecoverable" then the program shuts down and I have to restart my computer in order to use PS again.
View 7 Replies View RelatedI am getting Error 1603. Fatal error during installation while installing photoshop Cs 6. Â
View 2 Replies View RelatedI'm getting the error "Could not complete request because of a program error" when I try to Save for web. Never had this problem before.
Any ideas?
PS CS2
Mac OS 10.3.9
Power Mac G4 Dual 500
1.3 GB Ram
Thanks,
-- Rick
BugDreams.com
I have been re-saving many of my PSD files using CS3 image prosesssor with compatibility mode turned off. They have simply been saved again as PSD files into a different folder - no changes to the original PSD files. This has worked well and reduced file sizes by up to 50% (I had compatibility mode turned on previously).
of the 60 files I have processed, 3 will no longer open , I get a message that says "file will not open due to a program error."
these files have only ever been used in CS3. , they are quite large
from just under 1GB to 1.5GB, however other similar large files have processed successfully. I have re-tried without success.
I still have the original files so no data loss is involved.
I try to activate from Internet but it doesn't work. I get this message
Error 198:4
We are unable to activate photoshop cs3 extended...
How can I reinstall Photoshop 7 without getting a componentmovedata error -115?
View 4 Replies View Related have encountered an error message on opening Lightroom 4Â using Windows 7 Pro 32 bit.
Â
The message is saying - Error in reading preview cache.
I have a new box version of PantShop Photo Pro X3. Using the CD to install, I am getting a 1935 error message.
View 8 Replies View RelatedI'm getting the following error:
Â
ERROR 517 : Error in reading TR-20 project data.
but when I compare my raingage input to the one in samples it appers to be correct. Is there someplace else I need to be checking?
I recently upgraded to OS x 10.7.5, Now photoshop give me an error when I try to open it (Error 150:30). How do I get past this?
View 2 Replies View RelatedGettin error message on photoshop and acrobat  error 148:3 This began after Microsoft used log-me-in to correct problems in Office 365 Now neither Adobe programs will open how to solve this, Adobe Chat could not assist me
View 3 Replies View Related