I have an image that I wish to edit slightly, by filling the background with a certain colour.
What I basically want is the horse to remain white, with the black border, but the main background (underneath the horse) to be maroon.
I scan cartoons I've drawn so that I can colour them in Photoshop. However, when I click within an area I wanted coloured, I get a thin white line between the colour and the black outline. No matter what I do, I cannot get rid of this except to keep on clicking the colour until the line disappears. Is there a quick and more effective way of filling colour without this hassle?
View 2 Replies View RelatedI have CS5 extended. I know with coral draw I can use a paint bucket to fill an area with a premade pattern and on CS5 I found the pattern stamp tool where I can paint a pattern but is there a way to dump or fill a set area with a pattern? I find when I paint a pattern even the smallest mistake of painting a section twice can lighten or darken the pattern.
View 2 Replies View RelatedWhat's an easily way of browsing the patterns I currently have, but in a sense that they are already filled out on a large area so I can see the effect. So what I'm after is a way to ideally step through (single click) one pattern to the next, and see the effect it has as a pattern for a filled in area.
At the moment I see to have to keep going back to the Fill with Pattern for a given area and manually applying and then viewing. The only place I can find to see patterns is in the fill with pattern type dialog however (a) they are very small and (b) they are not tiled across an area so you can get a feel for what it will look like.
I'd like to ask if it is possible to change colour of outline according to filling. I've traced the raster picture (outline tracing) and there is no outline and the picture seems to be disturbed by tiny white lines. So I'd add hair outline and I'd like to have the same colour of the outline as is the object. Is there any function what is able change it at once and all at the same time?
View 6 Replies View RelatedI work with a German version and so I do not know the exact English words of the objects and functions. What I want to do is drawing circles with an outline (I know how to do that) but with a filling (background) colour which has a transparency of for example 50%. Is that possible and how should I do that?
Must I enter the outline and the filling part on two different layers to get the transparency for the filling colour?
I have been using Gimp for awhile (love it!) and have always used layer masks with no problems. But for some reason when I create a layer mask by filling in an area with black it isn't 100% opacity. Everything seems to show 100% opacity, but I can see the layers underneath (the mask is maybe at 90%??). If I "show layer mask" it is black where it should be and white where it should be, it doesn't look transparent. All my layers are set to "normal" mode. I'm at a lost as to what setting I must have changed?
View 1 Replies View RelatedWin 7 64 bit
How can I use the bucket-fill option to fill an area surrounded by a dottedline?
The dotted line is a path; so if I use a line for the dots, the bucket-fillworks.
But how can I step back after filling to change the path's line into dotsagain?
My image is in grayscale though it's recognised as RGB. It contains structures in white which I would like to fill with a colour. So basically, I'd like for all the white in the image to show up as e.g. red.
How do I do that? I'm guessing it must be possible to have a red layer and somehow this will then fill the white, but I'm getting confused with background and foreground filling options and I don't know which transparency options I have to choose.
I have been working with Paint.net for a couple of years and have never had this issue before. Suddenly, today, I tried using paint bucket to fill in a square and it filled in the entire image. I don't know if I accidently changed some setting on accident or what. how to make this stop so that the paint bucket only fills in the area I have outlined for it?
View 8 Replies View RelatedHow to fill an area with a colour in Xara 6, when that space is surrounded by different 'objects'?
So say I drew 3 separate lines to form a triangle. How can I fill that triangle with a colour? If I select the Fill Tool and choose a colour, then click in the centre of the triangle nothing happens.
If I were to do the same thing in Illustrator then it would simply create a new shape that fitted the space.
Perhaps this is not possible? Such a simple thing though, I feel I must be missing something. Is it perhaps available on Xara 7?
How do I change the colour of an area. Not tint over the area, actually change it. For example, change the colour of an eye from brown to purple.
View 3 Replies View RelatedI've selected a rectangular area of a jpeg and I want to fill it with a particular colour from another area of same image. Bucket Fill doesn't work here as it only selects from particular colours and shades in forground/background.
View 2 Replies View RelatedI can't find any preferences for changing the photo editing area background colour. I am not sure what it is called but what I am talking about is the space in the middle of the program where photos open up into (not the workspace option which changes the menu bar colours of which I am using the blue option.) At the moment the centre area is a charcoal colour. When I am editing a photo which is smaller than this space it is surrounded by this colour and it makes it hard for me to see the thin black border which I place around some photos. Can I change the colour of the editing area to white?
View 3 Replies View RelatedWhenever I create a new colour in the colour swatches it only stays there for a couple of actions while working on a project. I understand from others that once they create a colour it stays there. Why can't I get that to happen?
View 1 Replies View RelatedI am using CS6 and the Replace Colour Tool no longer allows me to replace multiple colours when I select the + . So when I have the panel open and I highlight the +, I used to then be able to click on several spots in my image and all of the colours that are in those spots are added to the selected colours that will be changed by using the sliders.
But now, when I use the + it has exactly the same effect as not using it - I can only choose one colour or an other, I can't add.....I want to reset this to the original way that this works.
Currently I have to open the panel, change one variation of a colour, save it, then re-open the panel and do it again (and again and again) until all the colour variations I am trying to remove are are changed. I know I also have the 'fuzziness' slider, but it does not give enough control.
I am designing a T Shirt for my ski club.I have taken an image from a banner (made in illustrator, full colour image attached) and I want to devide into a 3 colour image for the t shirt (I am only allowed 3 colours for printing).The colours I want to use are black, white and purple. The colour of the t shirt is a light blue.I want to then put the purple logo on top of the white and black too.So I'm after a black and white grunge background with a punchy purple logo on the top.All of this should be on a tranparent or, for design purposes, light bue (same as T Shirt colour) background.
how to split a full colour image into using only 3 (4 including transparent/light blue background) exact colours.
If I were going to black and white I might convert to grey scale and then paint areas to fully white or fully black using an overlay brush I don't think this works for me for more than just black and white though.
I have attached two of my attempts where I used the colour range selection and level adjustments. Niether was really successful though (one does not use the right colours or number of colours but looks quite cool).
I will like to find out the colour code for the background colour on a particular web address. Unfortunately I am new here so not allowed to post links so will say this as creatively as possible. the address is theregentlagos (with the usual prefix beginning with w and suffix beginning with c for all websites). I am referring to the colour where the menu items like logo, home, brands etc are on.
View 1 Replies View RelatedI've been asked to convert an image to 2 colour for printing. I have the image as a full colour CMYK layout (with layers), but the whole thing needs to be converted to 2 colour. I have the pantone reference numbers for the 2 colours it is to be converted to. I am familiar with the hue/saturation tool, but this just seems to convert it to one colour, and you have no fine control over the exact colour you want.
View 3 Replies View RelatedI have copied some colour negatives using my digital camera. What is the best procedure for removing the orange base colour of the film prior to converting them to positives?
View 9 Replies View RelatedHow do I see the object selected change colour dynamically as I adjust the colour sliders?
It seems the object only changes colour when I release the slider. But I want to see it dynamically change, so I can find the colour that works best without "hit or miss" - "trial and error" behaviour.
Yes... I'm aware some of you spend hours in colour programs creating a palette to work with. Good for you.
I'm just wanting to do it LIVE. Dynamically. In 2013. In Illustrator.
I'm just started using inventor 2013 (from 2010) & the way colours/materials are applied has completely changed so I'm learning again from scratch.
Here's my issue: A customer has sent a casting to me in Parasolid format. When I open it, all the unmachined surface are blue & look a bit garish. However, the colours of the machined faces are ok & I wish to keep them.
So, I want to chage all the surfaces that are blue - I can use the picker & select all the blue faces seperately (by holding CTRL down & select each face one be one) but this is a pain & takes ages (there are over 200 faces)
I can see & edit the blue color in the manager but how do I tell Inventor to replace all - can it be done?
I use EdHarvey's colour tint tool and it changes colour of the whole image, I'm looking for something similar but it only changes selected colour, so that the image is left with mutiple colour scheme rather than just one, any addon that can do this?
From this example, you can see the figure on the right is in a brownish colour scheme, what tool can I use in order to make it's colour scheme blue like the figure on the left?
[gradient tool] I double-clicked the colour stop , but the colour swatch doesn't come outI hv tried a couple of times in CS 5 and also CS 6.
View 1 Replies View RelatedAdobe Colour Management Print defaults seems to be assigning RGB meta to B&W pages and incurring Colour Print charges for B&W prints.I can manually change the print colour management to Printer managed on a per print basis instead of the default adobe colour managed which "cures" the issue but I do not seem to be able to save that setting as the default.
View 1 Replies View RelatedI've recently migrated from AutoCAD 2008 (non-industry specific) to AutoCAD 2010 so I don't know if this was an issue in 2009.
Back in 2008, when I choose the 'window' option when specifying a plot area, AutoCAD would show the workspace so that I could manually select a windowed plot area, and at the same time the whole workspace would be greyed out except the previously active window area.
This was handy, because we can have as many two dozen title-blocks (and therefore separate viewports) in paperspace, and knowing what plot area I last plotted or added as a saved page setup.
In 2010, it no longer does that. I now have to rely on the dashed border to know where the active plot area is/was (checked 'display printable area' in options>display tab) which I personally don't really like using.
How to changes the settings for the "Square Area" in mapcheck's closure summary. When I right-click the dwg name in the Settings tab of Toolspace and choose Edit Drawing Settings, then Ambient Settings, I see the Area settings, but in the closure summary, there is also "Square Area". Why are these both there? It WOULD be nice to show sq. ft. as well as acres, but I can't find anywhere to edit it.
Civil 3D 2012
Windows 7 Enterprise SP1
Dell Precision T3400
(Q9550 @ 2.83 GHz)
8GB RAM
Nvidia Quadro GTX 650 Ti BOOST
Photo editing. How do I select an area within a .jpeg image so I can blur that selected area?
View 2 Replies View RelatedAny method to transform all the pixel of a colour similar to X(in RGB values) to X ?
View 7 Replies View RelatedI am working on a website that has existing template images. One of these in particular has a predominate blue background colour, specifically #0a2a35 (195 81 21 [HSV], 10 42 53 [RGB], 81 21 0 79 [CMYK]). I want to transform this colour to an orange colour, #be5d27 (21 79 75 [HSV], 190 93 39 [RGB], 0 51 79 25 [CMYK]). At the same time, I want to change the lighter and darker blue accent colours of the image to become variations of the orange colour.
I have tried several things already, and one method that almost worked for me was using the "Colorize" tool to match the HSV values of the blue colour to orange colour. It almost works except the RGB values don't quite match up.
copy specific fill colour so that it can be filled in as stroke colour in other compound path. I attached 2 screen shots as below. I want to copy the blue olour to replace he red stroke.colour.
View 25 Replies View Related