Photoshop :: How To Browse Patterns Easily Already Filling In Area

Mar 1, 2013

What's an easily way of browsing the patterns I currently have, but in a sense that they are already filled out on a large area so I can see the effect.   So what I'm after is a way to ideally step through (single click) one pattern to the next, and see the effect it has as a pattern for a filled in area.
 
At the moment I see to have to keep going back to the Fill with Pattern for a given area and manually applying and then viewing.  The only place I can find to see patterns is in the fill with pattern type dialog however (a) they are very small and (b) they are not tiled across an area so you can get a feel for what it will look like.

View 2 Replies


ADVERTISEMENT

Photoshop :: Filling With Patterns

Aug 3, 2006

I created a pattern of concrete block coursing that I want to apply to a picture of the side of a building. The pattern is clipped so that it will repeat appropriately when filled into a large area. The problem is that depending on where I fill in the canvas, the pattern never fills in with the same start point. I want it to always start at the bottom left corner of the pattern (which is the bottom left corner of a block). Is there a way to set the point that a pattern moves out from? Also, does the pattern radiate from its center point or one of the corners?

In Autocad there is a snapbase command that lets you choose the start point for a pattern. This is exactly what I'm looking for in photoshop.

View 2 Replies View Related

Photoshop :: Filling An Area With A Certain Colour

Jun 8, 2005

I have an image that I wish to edit slightly, by filling the background with a certain colour.

What I basically want is the horse to remain white, with the black border, but the main background (underneath the horse) to be maroon.

View 3 Replies View Related

Photoshop :: CS5 - Filling Area With A Pattern By Using Paint Bucket

Aug 13, 2012

I have CS5 extended.  I know with coral draw I can use a paint bucket to fill an area with a premade pattern and on CS5 I found the pattern stamp tool where I can paint a pattern but is there a way to dump or fill a set area with a pattern?  I find when I paint a pattern even the smallest mistake of painting a section twice can lighten or darken the pattern.

View 2 Replies View Related

GIMP :: Create Layer Mask By Filling In Area With Black

Aug 4, 2013

I have been using Gimp for awhile (love it!) and have always used layer masks with no problems. But for some reason when I create a layer mask by filling in an area with black it isn't 100% opacity. Everything seems to show 100% opacity, but I can see the layers underneath (the mask is maybe at 90%??). If I "show layer mask" it is black where it should be and white where it should be, it doesn't look transparent. All my layers are set to "normal" mode. I'm at a lost as to what setting I must have changed?

View 1 Replies View Related

GIMP :: Bucket Fill (2013) - Filling Area Surrounded By Dotted Line

Jul 29, 2013

Win 7 64 bit

How can I use the bucket-fill option to fill an area surrounded by a dottedline?

The dotted line is a path; so if I use a line for the dots, the bucket-fillworks.

But how can I step back after filling to change the path's line into dotsagain?

View 3 Replies View Related

AutoCAD Inventor :: Fill Area With Hatch Patterns In Feature Sketch?

Feb 4, 2013

Is it possible to fill an area with hatch patterns in a feature sketch (ipt sketch), not in idw sketch?

I want to show a safety screen (wire mesh) in a 3D model, in order to reduce the file size, I do not want to do solid wire mesh in the model, but the sketch only. I was drawing one by one line and make a hatch cross lines in the sketch, it took me lots of time to draw these lines.

View 9 Replies View Related

Paint.NET :: Paint Bucket Filling In More Than Designated Area?

Aug 23, 2011

I have been working with Paint.net for a couple of years and have never had this issue before. Suddenly, today, I tried using paint bucket to fill in a square and it filled in the entire image. I don't know if I accidently changed some setting on accident or what. how to make this stop so that the paint bucket only fills in the area I have outlined for it?

View 8 Replies View Related

Photoshop :: Browse In Bridge CS6

Dec 4, 2012

I’m really looking for a "reveal in Finder" function. Seems like the "Browse in Bridge" is the nearest thing in Photoshop CS6.
 
The first time I used the browse-command, it showed me the picture in Bridge. All good. Suddenly it only switches to Bridge and nothing else happens.

Same thing for the "browse in Mini Bridge" command. I checked, and the same ting happens whether the file is on my drive or on the company server.

View 6 Replies View Related

Photoshop :: Unexpectedly Quits When Go To Browse?

Sep 6, 2013

Photoshop "unexpectedly quits" when I go to browse?

View 2 Replies View Related

Photoshop :: Easily Make Squiggly Lines

Oct 27, 2008

way to easily make squiggly lines in Photoshop?

There are 3 small, squiggly lines in there and I was wondering if I can use Photoshop to make them with ease?

View 2 Replies View Related

Photoshop Elements :: Organizer Crashes Or Stalls When Browse Photos (RAW)

Dec 4, 2013

I'm running Elements 12 on a Macbook Pro with 16GB RAM and Mavericks OS. I find that Organizer stalls and/or crashes when I browse photos.  I'm shooting mostly in RAW.  Is Elements and/or my Mac not robust enough to handle the file sizes involved? 

View 19 Replies View Related

Photoshop :: Combining Several Adjustment Layers Into Easily Accessible Preset?

Mar 28, 2012

I've been trying to combine multiple Adjustment Layers (For example Curves, Black & White, Exposure and Color Fill) into one final preset that I can easily access later. I've been having problems finding that out, not a single input in google was able to clear up my problem. I know how to save a preset for e.g. Curves only or Levels only. But using several layers of adjustments?

View 4 Replies View Related

AutoCAD .NET :: Browse All Objects Into Database?

Sep 3, 2012

How i can browse all objects into an autocad database?

View 5 Replies View Related

VideoStudio :: Browse Timeline To Find Particular Point?

May 11, 2011

When I open an MPG video I made recently and drag it to the timeline, I only get a view of the first frame on the timeline. I don't know what I changed but I would like to browse the timeline to find a particular point. How can I correct this?

View 2 Replies View Related

AutoCAD Civil 3D :: Browse To Files While Using MAPINSERT?

Mar 5, 2012

I have a world file TIFF that I'd like to insert into a plan, but it asks me for a file name and location instead of allowing me to browse for it.  How do I browse out to my drives and find it instead of having to type it in? 

Also, is there a button inside of some menu to use instead of having to type in MAPINSERT like LDD?

View 9 Replies View Related

AutoCAD Civil 3D :: Cannot Browse To Open File

Jul 12, 2011

When I open the software and try select "open", I have to type in the name of the drawing and path on the command line, it won't allow me to browse for the drawing or show recently used drawings.  I can work around this by typing in the path and name, but it is inconvenient.  Is there a setting that I need to change? 

View 6 Replies View Related

Lightroom :: 2.6 Windows 7 64 Bit - Not All Drives Listed In Browse

Jan 7, 2010

I am using Lightroom 2.6 on Windows 7 Ultimate 64 bit, and the browse for files or folders dialog that comes up when I need to choose location for my raw files imported as .dng does not list all hard drives of my computer - it only lists contents of my user folder in drive C:/ - thus making it impossible for me to choose any other location than those within my user folder. I attach two screenshots - 1/ Normal browse for folders dialog as it appears from within Windows explorer. 2/ Same dialog as invoked by Lightroom - with all drives missing.

View 14 Replies View Related

Lightroom :: How To View / Browse Photos By Keyword

Apr 18, 2012

What I can't seem to figure out is how to browse photos by keyword without creating a smart collection for every keyword.

View 2 Replies View Related

Lightroom :: No Drives In Browse For Folders Dialog Box

Aug 12, 2009

I'm running Windows 7 RC but I've been using that for a while.  It seems like this problem started after I began running my lightroom catalog from my Drobo, but I'm not sure if that is related as well.  When I bring up a Browse for Files or Folders dialog box, for example when chosing where to export or import images, nothing shows up in there except for my user name and folders that are inside there such as documents, pictures, music etc.  My drives and folders do not show up at all.  If the location I want to import or export to is in the list of previous locations, for example e:pictures then I can still use that location.  But if I wanted to pick that location from the browse dialog there is no way to do so.  I need to export some photos to a CD, I can't select the drive.  I attached an image to make my problem more clear.

View 3 Replies View Related

After Effects :: Possible To Easily Cut Compilation Length?

Apr 16, 2013

I thought that Media Encoder took forever to export my stuff... then I realized it had continued way beyond the actual size of the composition (as determined by the bar in Ae), and continued for the full duration which was much longer than that bar. Since trying to tell it to use only the bar in Media Encoder is a huge chore, can I somehow easily "cut to the bar" in Ae with a couple of clicks or so?
 
In order to make the composition LONGER, you apparently *must* edit the compo settings and manually enter a value. However, I'm hoping there is an easy way to cut it down to only the length it actually turns out to be when you are done. It would solve this problem and also make it more pleasant to navigate.

View 3 Replies View Related

Photoshop Elements :: Uploading Photoshop Pictures To Website Using Browse From Site

Apr 29, 2013

I use Photoshop Elements 11.  I am trying to upload photos to a website and the browse only goes to Windows/Pictures. How do I navigate to photoshop to upload pictures there?

View 3 Replies View Related

CorelDRAW Graphics Suite X5 :: Browse For CDR Files In Macro

Jul 12, 2011

I'm writing a macro that will take a .cdr file, import it, and then do something with it. When I first run the macro, I would like an "open file" browser to pop-up so that the user may navigate and specify which .cdr file to import.

View 3 Replies View Related

Paint Shop Pro :: Cannot Browse To Photos In Project Creator

Jul 27, 2011

Just got Photo Pro x3 Ultimate and that works fine. The Photo Project Creator on the other hand seems to have a problem. I can run it and open a new project but I cannot browse to where my pictures are stored. Pictures are only available if I put them on my desktop. The browser shows me as a user and the hard drive but when I click on them nothing happens. I have tried deleting the files in the digital studio folder and completely reinstalling the program to no avail. It does not matter who I run the program as or if I run it in compatibility mode.

Windows 7 home premium 64 bit
Phenom II x4
1 tb hd
8 gb memory

View 2 Replies View Related

AutoCAD Inventor :: ILogic - Browse To Select A File

Oct 9, 2012

Is it possible in iLogic to select a file in a dialog box or a browser ?

I need to replace the 3d model on a drawing. I have to ask the user to select the new file to use. How can I select the file using a dialog box or a browser ? The best should be a combobox with the list of opened files, and a button to browse on the disk, like when you create a view.

View 2 Replies View Related

AutoCad :: When Try To Attach PDF - Browse File Window Is Missing

Jan 4, 2012

I was wondering if I'm currently using AutoCAD 2010 and when I try to attach a PDF the browse file window is missing. The only thing that shows up is the option to type the location of the file on the command line. The window use to show up but I must of unknowingly clicked on a command to disable it.

View 4 Replies View Related

GIMP :: View Single Layer By Itself - Browse Layers

Apr 25, 2008

In the context of an animated GIF, or any other context where I have a multilayer image, I would like to see a single one all by itself. How do I do that?

View 3 Replies View Related

Lightroom :: Transitioning From IPhoto - How To Organize And Browse Photos

Jul 28, 2012

I'm trying to transition away from iPhoto to Lightroom.  Honestly I've always liked iPhoto.  I've found it very easy to use, and the way it organizes photos into "events" is very useful.  However, I'll be doing most of my photo work on a PC, so I'm moving over to Lightroom instead.

I have already exported all of my iPhoto library.  Each event has its own folder (named after the event), and all the photos have their meta data.  Everything is copacetic.

My question is a matter of organization of the photos within Lightroom.  In iPhoto, all the events were listed chronologically, and this made it easy to locate what I was looking for.  In Lightroom, however, it seems that the way you navigate photos is through the folder list under "Library," which is listed alphabetically instead of chronologically. 

I currently have 136 separate folders. So I turn to you for a bit of advice since I am brand new to this program.  Any way to organize and browse photos in Lightroom that I don't know about?

View 5 Replies View Related

After Effects :: Shift+F9 Stopped Working / And Browse Presets Does Nothing

Jul 23, 2013

While working with my Easy Ease, the SHIFT+F9 just no longer works or hasn't since installation. SHIFT+CTRL+F9, or F9 work as intended.(I checked the pref text file for my keyboard short cuts and SHIFT+F9 is assigned correctly)
 
Now when I create a preset then wish to view or browse my presets I click Animation > Browse Preset, and nothing happens.(Made a shortcut to my preset folder)

View 2 Replies View Related

Paint Shop Pro :: Combining Images Easily

Mar 9, 2012

Using the software Photoscape is easy to combine a plenty of images. URL... if it is possible to deal with it in PSP in a way easy way as Photoscape?

View 5 Replies View Related

GIMP :: Select Multiple Layers Easily?

Aug 31, 2012

In Inkscape, you can select multiple objects by simply using the Selecttool and putting a box around the objects. I unwittingly did the samething in Gimp. I chose the Select tool (R) and selected several images inone column. I thought, that I would see all the boxed-in layers selectedfor easy duplication, but nope.

So how can I quickly/easily select a box-full of layers at once, a laInkscape?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved