Photoshop :: Eyedropper Current Layer Sampling
Apr 17, 2012
Using the "current layer" sampling setting for the eye dropper before I apply any top layer adjustments (adding a top layer with a different blending more or adding an adjustment layer) it works fine. When I use any adjustment layers or any layer that has a blending mode, it affects the way the eyedropper picks color especially when set to current layer.
For instance, If I paint a new blank layer with random colors, I create a black and white adjustment layer on top of that one, I select the first color layer I go to pick a color using the eye dropper with the current layer sampling set, it picks a grey color (which is wrong). BUT!! if I open up the color picker with the color layer selected it picks the correct color. Now, if I delete the black and white adjustment layer, and I am back to only having the color layer, I then go to pick a color with current layer sampling still set, it chooses a grey color again?!?! There are no more layers on top of the original color layer I painted first, and yet it chooses a grey color?
I am working on Photoshop CS5 12.1 64bit
View 6 Replies
ADVERTISEMENT
Jul 16, 2013
Working on a Macbook. PS CS5. When I am painting using the brush tool I press the option key to switch to the eyedropper temporarily to sample a color. It samples the color but makes it the background color. I have to go swap colors to paint in the color I sampled.
View 2 Replies
View Related
Aug 30, 2012
if I bring a photo in to Photoshop, at that point I have just a layer and the eyedropper will work just fine selecting which ever color I want from that image. However, if I then bring in and place a second image into photoshop, so that now I have two layers that I'm working on, the eyedropper will not select any color on that new image. Obviously I'm doing something wrong, but can't figure it out. I just want to be able to select a color from that second layer image.
View 3 Replies
View Related
Apr 5, 2013
Consider this simple document with 2 layers and an adjustment layer:
Note the eyedropper targets. They read as expected:
Now, observe what happens when I click my adjustment layer (this is a new Levels adjustment that has NOT YET BEEN TOUCHED - so there should be NO CHANGE)
It doesn't matter whether the adjustment layer or its layer mask are selected, the results are the same. Here are my eyedropper settings:
Proof Colors is off. I can't think of any other setting to play with. This looks like a pretty huge bug to me, and it's not something I remember from earlier versions.
View 15 Replies
View Related
Sep 21, 2006
way to do this from the layers menu (ctrl-click new layer icon), but is there a key combo? I use shift-ctrl-n a lot to make new layers, but often I need to make a new layer *below* the current layer.
View 1 Replies
View Related
May 8, 2012
When i click on the green line has you can see on the image. The layer toolbar wont show me the right layer, like if it's not working. But i can see the right layer inside propreties.
Is there a system variable to ajust to see my layers inside the Layer tool bar?
View 1 Replies
View Related
Nov 18, 2011
I'm currently using AutoCAD LT 2012 and when I create a new layer and set it as current in the layer manager, regardless of what color I set the new layer to, the new layer's color remains the same as the previous one in the properties box even though the colors of the layers are always set to "by layer."
View 3 Replies
View Related
Nov 30, 2013
What i do is use the direct selection tool and click an anchor and then click the eyedropper tool on that anchor point What is happening is the the outline color is being selected. So i found out Illustrator CS6 you have to hold shift while clicking the eyedropper. I tried that and still can't get the color of the underneath layer, the fill color stays white? Here is pic:
As you can see in the navigator window, the shade of red is that of the outline and not the apple underneath the outline. I tried shift+eyedropper and white is the only color that get's sampled.
View 6 Replies
View Related
Sep 17, 2013
I'm working with a DWG that already has a-gazillion VPs.
I'm currently making new layers, but the "New VP Freeze" option only seems to apply to new VPs made AFTER the creation of the layer.
I need the new layers I'm making to be Frozen retroactively, if you will, in all previously-made VPs.
Short of going into each and every VP and manually VP Freezing these few layers, what can I do?
View 1 Replies
View Related
Mar 27, 2013
I want to make a layer from external reference current.
I tried to identify it with its full name, but I got an error: eInvalidInput. So I found out, I have to use only the part behind the pipe.But then there is a problem, because this name is not unique withing the drawing.
Any number of xrefs can have such layer and also the drawing itself can have a layer with the same name. How exactly can I set a layer from xref current?
example:
layer from xref1: Xref1|LayerName1
layer from xref2: Xref2|LayerName1
layer from the drawing: LayerName1
View 6 Replies
View Related
Sep 10, 2013
how to obtain the current layer state?
View 5 Replies
View Related
Apr 9, 2012
Is there a way to lock the current layer (to say layer 0) so that is STAYS the current layer regardless of my isolating, turning layers on and off etc?
Really annoying to keep getting those "Are you sure you want to turn off the current layer" messages and it would prevent me from either drawing thing on a layer I don't intend to, or drawing on a layer which is off (which confuses me every time).
View 4 Replies
View Related
Mar 20, 2013
I use the same label style for multiple objects (surfaces) with different layers (i.e. Concrete, Pavement, etc.) I have the label style set to Layer 0, to take on the layer properties I want the label on. When I insert a label, it defaults to Layer 0, then I have to change it's layer. Is there a way to insert a label on the current layer?
View 4 Replies
View Related
Jun 14, 2011
I cant change layers and make it current. The layer manager is stuck on layer 0.
View 8 Replies
View Related
Nov 7, 2011
I thought when you created a tool pallet with blocks on a certain layer and put them in your drawing that the block would be placed on the layer it was created on? When I put a block that was created on 0 layer it will insert on my current layer? These blocks are on a network and I am the only one that has rights to modify them.
View 5 Replies
View Related
Sep 12, 2013
Had a trawl through the options and settings - couldn't find a way to stop this message appearing? Even EXPERT <1> didn't stop it.
View 3 Replies
View Related
Feb 3, 2009
I've got an animation pretty much done as far as timing goes and everything. Now I'm going back and editing some things that require adding a few layers to add some things to the current layer that already is trimmed appropriately to the correct time.
Any script or something that will create a composition from a layer using the length of the layer's in and out point instead of the whole comp time?
Right now I'm opening the precomp, hitting "i" "b" "o" "n", then right clicking on the comp range bar, choosing trim to comp time. Then I go back to the main comp, move the time back to where the layer previously started and hitting "["
So it all goes by pretty quick, but I consistently have to do that like 20 times. And no, it isn't completely necessary, but if I have to give the file to someone else it makes it Much easier to see what's going on if they can see the actual length of a layer. If you leave it at default it appears the layer is needed for the entire composition.
So, is there a way to script that or something? I usually just need to do something like add some text, simulate a graphic display, or create some fake animated depth of field or something like that. I don't like to add more than one layer per action in the main comp, so if more is needed then i usually precompose it as to not have more than a hundred layers or so for the bulk of the comp.
View 9 Replies
View Related
Jan 12, 2010
There are certain occasions where I would like to insert a block to inherit the current layer in an active AutoCAD drawing. This happens frequently when a client requires a certain layering standard and I have a block from another drawing with different layering standards. To correct this it usually involves several steps - Explode and change the layer, setbylayer, bedit, etc,
Is there a command to where I can directly insert a block and its layers change to the current layer of the active AutoCAD drawing?
View 9 Replies
View Related
Dec 19, 2012
Private Sub UserForm_Initialize() Dim layerColl As AcadLayers Dim entry As AcadLayer Dim LayList As String Set layerColl = ThisDrawing.Layers For Each entry In layerColl ComboBox1.AddItem entry.Name Next End Sub
I have a form with a combobox. That combobox is filled up with all layers in a drawing. (see above)
Now I want to make the layer that I have selected (value) in the combobox the current layer in my drawing.
How can i make it current?
View 2 Replies
View Related
Feb 1, 2012
In the hatch dialogue there is a setting to target the hatch to a specific layer. How does one set the default to ALWAYS be "Use Current"?
Attached jpg shows the target layer as ffbrg, but I want that to ALWAYS read "Use Current" when creating a NEW hartch. In other words, I am happily working in a specific layer creating all these hatches and then realize LATER that all the hatches were in different layers causing great confusiion and havoc.
View 9 Replies
View Related
Feb 24, 2011
Using C3D 2010, I have a drawing that has a horizontal alignment and it is stationed. I see text at every 100 feet and tick every 50 feet. Perfect. I have that drawing x-refed into another drawing. The station ticks take on the properties of the current layer in the drawing they are x-refed into. If I change to layer defpoints, the tick to not plot! Shouldn't the ticks be fixed to a certain layer?
View 4 Replies
View Related
May 12, 2011
How can I disable the "the current layer will be off" popup when hiding layers? I found this:
[URL]
but I'm afraid the expert command is only valid for commands
View 6 Replies
View Related
Apr 25, 2006
way to sample colors off the web? If I see a site with colors that I like, is there a quick way of finding out the hex numbers? I know the long winded way of save as - then edit in dreamweaver .......
View 2 Replies
View Related
Jan 16, 2013
When I set a layer as current, every object or line I select in the drawing appear to be on that layer in the toolbar. Although in the properties toolbox, I see that the line I selected is still on the right layer.
I can't work in paperspace either, when I freeze a layer it freezes all objects. It seems like whenever I give a different layer to an object, it attributes to all object that same layer.
When I open the same drawing in acad 2008, everything is ok, the objects have the proper layers.
Is there a command for that or it's an acad 2013 problem?
View 9 Replies
View Related
May 20, 2012
1. Is there a "show quick mask" feature for showing masks?
I know Gimp has a "*Show quick mask*" feature which shows what you have(and haven't) selected by displaying a red overlay over your image,allowing you to add to or subtract from a selection by using the paintbrush, but I haven't found a similar feature for showing masks.
Photoshop has this feature (it's called 'reveal mask' I think) and it basically just shows a red overlay of your mask on your image so that,similar to the quick mask feature in Gimp, you can see where you have and haven't masked through.
(I don't own Photoshop so I'm not sure if the red overlay shows the opacity with which you've masked through or whether or not you can edit the mask when it's being shown as a red overlay.)
2. Is there a command for showing the layer underneath the current layer I'm working on?
This is another feature that I've seen Photoshop has that is useful for blending multiple exposures (and lots of things, really).
Basically it's just a keyboard shortcut for showing the layer underneath your current when you hold down a certain keyboard command (it's not something you toggle since it's meant for quickly viewing what's on the layer underneath your current one).
I know I can press space bar to show or hide the layer I'm currently working on, but I can't do that unless I focus into the layers dialogue first. It'd be nice if I could activate that functionality from anywhere,regardless of whether I'm focused on the layers dialogue.
Do either of these features exist in Gimp?
View 3 Replies
View Related
Apr 7, 2013
Open a new document in AI (CS5/CS6), and then draw some arts (rectangles), given an original point (such as 0,0), now I want to all arts in current layer rotate 30 degree around the origin. How to realize it?
View 1 Replies
View Related
Feb 20, 2013
Is there a way to send a selected textFrame item to a layer using javascript?
I don't mind if it is send to current layer or some other way to accomplish the task.
(Using Adobe Illustrator CS4)
View 5 Replies
View Related
Aug 13, 2013
Just starting to use 2014, and so far not so good. I tend to keep the Properties Palette open and docked. In 2014, if my current layer is 0, any object I select in a drawing shows as Layer 0 in the Design tab of the Properties palette. If I change to a different layer, any object selected shows that layer in the Properties palette. If I start a new drawing, enter WALLADD and draw a wall segment, the A-WALL layer now correctly appears in the Layer Manager, but when I select the wall, the Layer in Properties is the current layer, not the A-WALL layer it should have gone on. Also, Quick Properties is on, but doesn't pop up anywhere.
View 5 Replies
View Related
Oct 28, 2012
Everything is in the title,
When I select the eydropper and I drag it outside Photoshop to sample a color of an image (in another window) everything seem to "move" in photoshop until I reach that image. When I say move it's the view that's moving not the layers etc.
How to make photoshop "view" stand still while i'm dragging the eyedropper out ?
View 1 Replies
View Related
Aug 7, 2012
We have survey files that we xref into our design files. In the survey files themselves, the points don't change color. When we xref them in, the point markers (only the circular node on the actual point, not the line coming off of it) take on the color of whatever the current layer is in the drawing, only fixable by changing the current letter and regenerating.
View 1 Replies
View Related
Jun 19, 2012
However, I ran into the following scenario:We have a big PS file full of pixel art & photographs, some of both are smart objects. We'd like to resize a bunch of them, but need bicubic for some, nearest-neighbor for others.
Is there any way to set sampling techniques for each smart object?(If not, where does one post feature requests? ;D)
View 9 Replies
View Related
