I thought when you created a tool pallet with blocks on a certain layer and put them in your drawing that the block would be placed on the layer it was created on? When I put a block that was created on 0 layer it will insert on my current layer? These blocks are on a network and I am the only one that has rights to modify them.
View 5 RepliesI am cleaning up a drawing from another company, (changing linetypes, text, layers, blocks). When i change blocks, opening the block that I want and saving it as the one that is there, the block comes in at a scale that is a lot larger then what i would like. After saving the new block, if i insert it in, it comes in at the proper scale.
Both the drawing and the blocks are at unitless.
I'm trying to set up a dynamic block library for my company. For some reason, whenever I bring in certain blocks, they come out way smaller than when I put them in.
insunits is set to 2 (feet)
Here's the weird thing. I created (for simplicity) Block A and Block B. I created them both in the same drawing, put them both into the toolpallette from the same drawing and then pulled them right back into the same drawing. Block A comes in fine... same size. Block B, even with the block already in the drawing, comes in tiny. What was 2.5' when it went into the toolpallette comes out at .21'. A picture is attached... the top row are the blocks created in the drawing, the bottom are what happens when I bring them back in from the toolpallatte.
I have tried created seperate drawings... tried different scales, deleted and recreated the toolpallette, etc.
I am having an issue inserting a detail call out "block". The blocks were created to be annotative however, when I am inserting them into my paperspace at 1" = 30' it shrinks up the block. In model space it shows at the correct size.
View 2 Replies View RelatedI recently started working at an Electrical Engineering firm and one of my many tasks is to sort out their AutoCad system and bring it up to date! An issue that has only recently started happening is that our blocks don't insert at the correct scale. Some of our drawings are metric and some are imperial, and currently all our blocks are in one Imperial file (reference file for our palettes). Is this our issue, my understanding is that when you create a block you should create it as a wblock and each block should have its own file.
The problem is that some of our blocks we want to come in at scale ex/ a 2'x4' light fixture, however an electrical socket or light switch symbol we want to come in at a slightly enlarged scale so that you can easily read the drawing and see where they are located.
I'm using AutoCAD MEP 2014 (though it's present in all variations).
I am using OOTB settings to eliminate network permissions as my issue.
I open my ACAD to an OOTB template file. Create a new tool palette, call it "CS" for now. When I try to add blocks to my palette, I get the black circle with a line through it. I get the same result when trying to add to existing OOTB palettes.
I am a network administrator and administrator on my machine, permissions shouldn't be the issue.
Checked my Options->Files and everything is pointing to the OOTB locations on my C: drive, nothing special.
The .dwg files are on my desktop, so there's no network sharing issue.
I tried going through Design Center (ADCENTER). I browsed to the folder containing the .dwg files, right-clicked and selected "Create Tool Palette" or something to that effect. It created an empty palette with no tools.
I've also tried inserting a block from another OOTB palette, no issue. Then whe trying to drag that block back to the tool palettes, it doesn't let me.
Toolbars/Panels are not locked, though I don't think that makes a difference.
Hmm...trying to think what else I've tried...I've Googled for a couple hours now, obviously with no luck.
I have a problem with my tool palettes today. I've created some new blocks and saved them to our server, and i've then opened the design center and found the file location. I then click create tool palette of blocks. The palette displays but no blocks show on it, I've even tried dragging and dropping blocks to it but nothing shows.
I've downloaded the service pack and run a repair but still the same problem. My existing palettes have also had their block images turn into a white squares which need updating before I can see the image.
I changed the Tool Palette file location from where it was looking to a random file then it let me create palettes.
I am new to this company, we manufacture and build panelised buildings. We are 3 users in the drawing office, we all have Pallettes set up in ACAD and our pallettes all reference the same block files on the server.
We do Data extraction when we move into the production phase of any project and we extract all block information into Excel.
The problem is that when these blocks were made very little thought went into the naming of them. So now when ACAD produces a list of the blocks on the drawing I have electrical, plumbing, fittings etc all mixed together, making it time consuming to sort through them and put them together in their separate spreadsheets.
What I am hoping to do is go through our library of blocks and rename them all, simply giving them a single letter prefix at the start of the file name IE E - Single plug, P - Tap, D - 826 Door etc. The problem is obviously if I rename them then all 3 users have to reassign each individual block again to their palettes.
I need to insert the same block from a tool palette multiple times into my drawing. Is there a way to do this without having to pick the block from the tool palette every time I want to insert it?
View 9 Replies View RelatedI know how to create a new Palette but I need to populate it with some terminal blocks i use every day, I currently open drawings and copy and paste, How do I add the terminal blocks I created to my custom palette. I have AutoCAD LT 2013
View 2 Replies View RelatedWe are using LT 2011 and 2012.My company has cad standards is for everything to be drawn on a snap. All of our blocks are designed with that in mind. Now we want to start using tool palettes to insert our blocks. When we have tested using tool palettes, with the blocks we have made, sometimes the block will drag into the drawing to snap and sometimes it wont. I have also read online that tool palettes blocks will not go to snap at all. We have seen it work (sometimes).
View 6 Replies View RelatedAfter 20 years of using Autocad thought it time to get serious about putting all my symbolslocks on palettes. Went to design center, selected a folder and right clicked to get "Create Tool Palette of Blocks". Creates a black palettes but no block tools ?
All symbolslocks are individual files. I'm using ACA 2014.
I am currently creating templates for my drawings in order to standardise their use which includes the creation of templates, multileader styles, text styles etc... and placing them in custom tool palettes. I am also looking to add standard blocks such as fasteners and steel sections to my tool palettes however this has thrown a bit of a curveball. Basically I want all the blocks that I place in the tool palettes to move with the .dwt file I have created. At the moment it would appear that the source of the block is within the filing structure of the computer as apposed to just the template file it is placed in. Is there anyway to resolve this, or have the blocks so that they are stored within the template so that if the template is moved onto say a stand alone laptop elsewhere the blocks that appear in the tool palettes would go with the dwt file?
View 1 Replies View RelatedI am creating new tool palettes for lab equipment blocks. I was able to create a new palette and drag and drop blocks into it. When I go to create other palettes I am unable to drag and drop blocks into them. I am able to drag and drop into the tool palette I previously created and then drag and drop into the new palette.
But when I shut off Autocad and reopen the new palettes disappear. How can I create a new tool palette and it works, then create other tool palettes and I can not drag and drop to it? I am using Autocad Architecture 2013.
I just made myself another toolpalette, and the icons/images don't show up.Well, none of the icons/images show up except for the Junction Box (J with a circle around it.)I found that the Junction Box block is the only one that is NOT Annotative. All the other ones are ANNOTATIVE (as they should be.)
In Windows Explorer, it looks like images were saved for each new block I inserted into the toolpalette, but the images are blank except for the Junction Box of course. Is there a special way you have to put your Annotative blocks into a toolpalette so the icon/image shows up??
When i click on the green line has you can see on the image. The layer toolbar wont show me the right layer, like if it's not working. But i can see the right layer inside propreties.
Is there a system variable to ajust to see my layers inside the Layer tool bar?
I'm currently using AutoCAD LT 2012 and when I create a new layer and set it as current in the layer manager, regardless of what color I set the new layer to, the new layer's color remains the same as the previous one in the properties box even though the colors of the layers are always set to "by layer."
View 3 Replies View RelatedI was looking for a way of counting blocks inserted in my current drawing.
F1, brings up HELP.
In the search box i type BLOCKS.
Results =
Overview of Hatch Pattern Definitions
Create a Shortcut Menu
Overview of Shape files
Overview of slides
Work with User Interface Elements
Multiple Drawing Folders
I'm working with a DWG that already has a-gazillion VPs.
I'm currently making new layers, but the "New VP Freeze" option only seems to apply to new VPs made AFTER the creation of the layer.
I need the new layers I'm making to be Frozen retroactively, if you will, in all previously-made VPs.
Short of going into each and every VP and manually VP Freezing these few layers, what can I do?
way to do this from the layers menu (ctrl-click new layer icon), but is there a key combo? I use shift-ctrl-n a lot to make new layers, but often I need to make a new layer *below* the current layer.
View 1 Replies View RelatedI want to make a layer from external reference current.
I tried to identify it with its full name, but I got an error: eInvalidInput. So I found out, I have to use only the part behind the pipe.But then there is a problem, because this name is not unique withing the drawing.
Any number of xrefs can have such layer and also the drawing itself can have a layer with the same name. How exactly can I set a layer from xref current?
example:
layer from xref1: Xref1|LayerName1
layer from xref2: Xref2|LayerName1
layer from the drawing: LayerName1
how to obtain the current layer state?
View 5 Replies View RelatedIs there a way to lock the current layer (to say layer 0) so that is STAYS the current layer regardless of my isolating, turning layers on and off etc?
Really annoying to keep getting those "Are you sure you want to turn off the current layer" messages and it would prevent me from either drawing thing on a layer I don't intend to, or drawing on a layer which is off (which confuses me every time).
I use the same label style for multiple objects (surfaces) with different layers (i.e. Concrete, Pavement, etc.) I have the label style set to Layer 0, to take on the layer properties I want the label on. When I insert a label, it defaults to Layer 0, then I have to change it's layer. Is there a way to insert a label on the current layer?
View 4 Replies View RelatedI cant change layers and make it current. The layer manager is stuck on layer 0.
View 8 Replies View RelatedHad a trawl through the options and settings - couldn't find a way to stop this message appearing? Even EXPERT <1> didn't stop it.
View 3 Replies View RelatedI'm aware of the intricacies of layer zero, and the general rule-of-thumb to draw content inside of blocks on 0 so that the block takes on the properties of the layer it is inserted onto, can be isolated, etc.
I generally follow this rule, and where required, I change the line color inside of the block when I want to maintain a certain lineweight. (lineweights based on my plot settings for colors). My dilema is that i've got an intricate block. I'd like to be able to manipulate this block in a way that you'd isolate layers and change their properties. Is there any way to isolate a portion of lines inside of a block while still maintaining them either on layer zero or another (magical) sort of "transparent" layer?
As an example, i'll use the classic "existing", "proposed" door block. i'll draw the door, swing, and jamb all on layer zero. I will set the the swing portion red and dashed so that both existing and proposed swings appear the same. the door itself will then take on the properties of my existing and proposed door layers, respectively. Now say i'd like to edit my block. I want to isolate the swing portion and color it by layer. (obviously the example is lacking here since it would be easiest to just click on the arc) Can i group items inside of a block, or better yet, can i create a second layer and somehow edit the layer's properties so it is "dynamic", "transparent", or "magical" like layer 0?
There are certain occasions where I would like to insert a block to inherit the current layer in an active AutoCAD drawing. This happens frequently when a client requires a certain layering standard and I have a block from another drawing with different layering standards. To correct this it usually involves several steps - Explode and change the layer, setbylayer, bedit, etc,
Is there a command to where I can directly insert a block and its layers change to the current layer of the active AutoCAD drawing?
Private Sub UserForm_Initialize() Dim layerColl As AcadLayers Dim entry As AcadLayer Dim LayList As String Set layerColl = ThisDrawing.Layers For Each entry In layerColl ComboBox1.AddItem entry.Name Next End Sub
I have a form with a combobox. That combobox is filled up with all layers in a drawing. (see above)
Now I want to make the layer that I have selected (value) in the combobox the current layer in my drawing.
How can i make it current?
In the hatch dialogue there is a setting to target the hatch to a specific layer. How does one set the default to ALWAYS be "Use Current"?
Attached jpg shows the target layer as ffbrg, but I want that to ALWAYS read "Use Current" when creating a NEW hartch. In other words, I am happily working in a specific layer creating all these hatches and then realize LATER that all the hatches were in different layers causing great confusiion and havoc.
Using C3D 2010, I have a drawing that has a horizontal alignment and it is stationed. I see text at every 100 feet and tick every 50 feet. Perfect. I have that drawing x-refed into another drawing. The station ticks take on the properties of the current layer in the drawing they are x-refed into. If I change to layer defpoints, the tick to not plot! Shouldn't the ticks be fixed to a certain layer?
View 4 Replies View Related