Photoshop :: Eizo Monitor + Dell 2407 + Colour
Jun 8, 2008
I recently bought an Eizo CG301 and think it's awesome. I also have a Dell 2407 and run them both in a dual monitor setup.
I produce hi res digital fine art prints and I'm having issues with my colour setup......
This is the problem. Eizo (100cd,6500k,2.2gamma) is calibrated using an eye one display and saved in CAL mode....the dell(180cd ( the lowest it will go without lowering colour values), 6500k,2.2gamma) is calibrated using the same device and is using the profile via vista colour management.
Basically the Eizo shows 255,0,0 as a mid red/orange and the dell shows the same colour as a pure red - this is backed up with a printout from my epson 3800 where the reds are red and not orange. As I'm producing professional output it's essential for me to know which monitor is correct - do I trust the Eizo as it's hardware calibrated?
all other colours seem fine and my Eizo's deltaE values are between 0.2 - 1.3 (0.4 average)which is quite good....
can anyone confirm if 255,0,0 is a mid red/orange and not pure red.
View 14 Replies
ADVERTISEMENT
Mar 17, 2009
I have a Dell 1907 FP Flat Panel Monitor. The controls include a 'Brightness' adjustment. I am trying to set the monitor so that I have a luminance of between 100 and 120 cd/m2. I am using a Spyder 3 Pro display calibration device to set the luminance but the device does not measure luminance. Can anyone tell me what Brightness level my monitor should be set at to achieve a luminance of 100-120 cd/m2?
View 37 Replies
View Related
Apr 4, 2006
I'm having trouble getting both of my printers to print out to the same tone/colour that is displayed on my Monitor. Neither are accurate
Is there anything I can do with my monitor settings, or my photoshop/illustrator colour settings so that what I see on the screen is what will be printed out.
The printers are :
1) Hewlett Packard 1220C
2)Epson Stylus 2100
They both print out differently.
For the HP printer I've looked at the 'Image Colour Management' and it states the 'ICM is handled by host'
For the Epson printer the Colour Management is set to 'Automatic: Windows will automatically select the best colour profile from the list of associated color profiles'
I know it's possible to change the Color Setting in Photoshop but I don't really know what to set it to, and who to set it so it's as close to my monitor display as possible. (I work with RGB colour)
View 6 Replies
View Related
Feb 8, 2009
I know this isn't related to Photoshop but as some of you have Eizo Monitors. So, I was wondering if you have the same issue as me when trying out Win7 beta.
I know it's still in beta and that it's a little rough around the edges..however, when I run ColorNavigator 5 (tried ver 5.1 to 5.2) It tells me the hardware calibration is not recognised and advises me to unplug the USB and start over....basic the software cannot see the hardware.
View 8 Replies
View Related
Oct 11, 2012
What is the best way to get consistent color from one monitor to another. Is that even possible?
View 6 Replies
View Related
May 9, 2013
Problems with 3D objects. PS freezes every time I create a 3D object and try to come out of 3D mode or save the file.
Updating driver for ATI Mobility Radeon HD560V display adapter.AMD website auto-suggested and installed HD 4650 (?) driver.That made PS work a bit better, but other stuff started freezing (Chrome, Bridge)Went to Dell site and reinstalled HD 560V. Had to uninstall and reinstall Catalyst Control Centre.
TECH INFO.:
C:UsersTed>cd Program FilesAdobeAdobe Photoshop CS6 (64 Bit)
C:Program FilesAdobeAdobe Photoshop CS6 (64 Bit)>sniffer_gpu
Device: 00000000006412A8 has video RAM(MB): 1024
Vendor string: ATI Technologies Inc.
[code]....
The AMD Mobility Radeon™ graphics driver supplied by the notebook manufacturer is customized for the built-in display and the features and functions specific to the notebook. It is recommended to use the drivers provided by the notebook manufacturer.Current: 8.713.3.2000
how I can make 3D work in CS6 on my laptop?
View 3 Replies
View Related
Jan 18, 2009
I've got two Dell 2408WFP 24" displays due to arrive Monday and I was wondering if any of you owners out there have any suggestions for me. I understand I'll have to calibrate these puppies and definitely bring down the brightness.
Do you have any other comments or suggestions for a new owner and it's use with Photoshop?
View 3 Replies
View Related
Dec 17, 2008
slow issues and supossedly how to fix them (kapersky etc..). I have yet to be able to configure photoshop cs4 64bit to run smoothly..
here is my config...
Dell Precision Covet m6400
Vista 64
Quad-core qx9300
8gb ram
nvidia quadro fx 3700m 1gb
2x320gb 7.2k drives raid 0
cs4 64 should run like a dream on this machine... it doesn't..
What problems i get.
--------------------
General refresh issues, lag, panels done't minimise maximise smoothly, can't drag layers smoothly from one document tab to another. When i try and close the document tabs they take ages to close. When i open nvidia control panel in tandem to having photoshop open to see whats going on the animated logo jitters and does not rotate smoothly when i move my mouse over it...
What i have done to try and solve the issues.
-----------------------------------------------
Uninstalled and re installed numerous times.
Uninstalled and re installed Dell's nvidia driver and other drivers from laptopvideo2go.
Unistalled eset node 32 64bit
Changed gpu setting in performance menu...
CS3 runs ok though...
View 1 Replies
View Related
Jun 28, 2013
Recently upgraded from Vista to Windows 7 and upon reinstalling my Dell AIO printer, it cannot find already installed Photoshop 7 software. No problem with Vista.
View 1 Replies
View Related
Dec 20, 2013
Why can't I drop a clip in the Program Monitor from the Source Monitor in Premiere? When I try to move a clip from the Source to the Program Monitor, a hand displays with the "circle with a line through it" symbol.
View 2 Replies
View Related
Dec 10, 2012
I recently changed pc and monitor causing a damn problem with those color spaces! My monitor is a Dell u2412m and by default it's setted on:
Now when I open a RAW file with ACR and choose sRGB as color space the result is this:As you can see, most of the photo presents black shadows. If I save the file and I open it with windows image it's perfect. Indeed, if I choose ProPhoto for monitor and for the photo the visualization is fine:
I must change the color space in sRGB or even RGB before save the final image so I really would like to se a real preview of it in photoshop instead of saving it first. So the problem occurs when I save to RGB (less artifacts) and sRGB (lots of artifacts!). I can't understand this because I'm using the same color space as default for my monitor.
The pc configuration is:Intel i7 3770
Ati HD7870 driver Ati 12.11 beta
RAM 16gb
View 4 Replies
View Related
Feb 11, 2013
i´m stuck with calibrating my Dell U2711(wide gamut) on Windows7, CS6 i used it with the integrated Adobe RGB preset and a standard profile. After calibration with i1displayPro (monitor in custom preset, slight changes to reach D65 whitepoint) i got a solid ICC2 profile which seems to fill the Adobe RGB space quite well (compared them in 3D).
The point where i can't get any further is the color rendering in PS and ACR, the colors are limited to a sRGB like saturation level. I´ve set my Creative Suite Color settings to aRGB, disabled Softproofing in PS.Here is what red (255,0,0) looks like: left: proofing OFF
middle: sRGB proof
right: monitor proof
View 13 Replies
View Related
Oct 2, 2012
The Samsungs splash screen gets to reading preferences but then says: cs6 has stopped running. I have deleted the prefs file to no avail. The samsung has a nvidia geforce 630.My uac has always been all the way down
View 4 Replies
View Related
Sep 18, 2012
I am using Windows 7 and recently installed Photoshop Elements 10. If the Dell 3000cn is set as my default printer, as soon as I click on print, I receive the mssage I need to install a printer.
I have verified that I have the latest Dell driver. If another printer is the default, I can print one image to the Dell printer. If I try to print a second image or change certain prnter settings, such as setting a custom size, PS Elements just show the waitng icon and never moves on so it has stoped working and I receive the following dialog box from Windows.
View 3 Replies
View Related
Apr 17, 2014
How can separate Multicam Monitor from Program Monitor? I would like to put Multicam monitor on one monitor and hte Program on another.
View 2 Replies
View Related
Jun 24, 2013
When I open an image in Photoshop CC 64-bit on my Dell XPS 15 L501x laptop with nVidia 420M GPU selected as graphics processor, the image is blank. If I go to the performance preferences and untick "Use Graphics Processor" the images are shown correctly after closing and reopening image (the same issue occurs with Basic, Normal and Advanced drawing mode selected).
I assume that Photoshop will run slower not using the graphics processor, so would like to sort it so I can use it to improve performance. If I remember correctly, on the trial version of CS5.1 on the same laptop, I just disabled OpenGL and the images were displayed fine. Is there any way to just disable OpenGL in Photoshop CC 64-bit (or resolve this another way)?
View 10 Replies
View Related
Dec 23, 2012
How to use the touchscreen on a desktop to draw with the brush tool in adobe photoshop elements? I can use the mouse to draw, but I cannot use the touchscreen. My touchscreen works well in Microsoft Paint so it doesn't seem to be a hardware problem.
View 1 Replies
View Related
Oct 7, 2012
I would like to try Photoshop for digital art. I downloaded the 30 day trial version of Adobe Illustrator CS 6 about three days ago and noticed immediately that touching my laptop’s touch screen will only allow me to pan using the Hand Tool in Photoshop. I have never had this problem in Adobe Illustrator, as using the touch screen acts just as if I were clicking the left mouse button and dragging the cursor around the screen. I have a Dell XPS 15 - L502X laptop with an integrated touch screen (the entire 15” screen is Multi-touch sensitive). It is running N-Trig DuoSense Digitizer with the latest drivers. Is there some simple setting change that can be done within Photoshop CS6 to make it recognize a touch screen input as a normal left click and thus allow me to draw on it using the pen, pencil, or paintbrush tool? I find it quite odd that I have no problems with this in Illustrator CS6. Could it be that this tablet-like touch screen input is restricted on the trial version?
Here is a link to a youtube video that I put up showing the problem. The first program shown in the video is Adobe Illustrator CS6 using the Paintbrush tool. The second program shown is Adobe Photosop CS6 using the pencil tool. I draw the line in Ps using the mouse pad and then attempt to draw (still using the pencil tool) on the touch screen yielding only scrolling with the hand tool.
[URL]
Here's my system specs copy pasted right from PhotoShop.
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2494 MHz
[code]...
View 1 Replies
View Related
Aug 25, 2013
Do i use back up, export or copy/move .i want to have just i merged set pf files with no duplicates and no omissions . then i will just run one version in organizer as its so much easier.
View 2 Replies
View Related
Oct 25, 2012
My laptop Dell Latitude E5420 is not recognising my camcorder. I tried with two of my mini DV camcorders, both of them are not recognised. When I connect through the IEEE1394 port on the laptop, it doesn't respond at all. In UL VS or any other video capture programs, the camcorder is not recognised, but only my laptop built in web camera is recognised.
Tried with changing IEEEE1394 host controller with Legacy in the Device Manager, but doesn't work.
View 5 Replies
View Related
Dec 28, 2013
I have X6 Corel on my Dell XPS. I cant move layers with "Shift+pg up/pg dn/home/End.
what shortcuts should I use?
View 5 Replies
View Related
Jun 18, 2013
Whenever I create a new colour in the colour swatches it only stays there for a couple of actions while working on a project. I understand from others that once they create a colour it stays there. Why can't I get that to happen?
View 1 Replies
View Related
May 21, 2013
I am using CS6 and the Replace Colour Tool no longer allows me to replace multiple colours when I select the + . So when I have the panel open and I highlight the +, I used to then be able to click on several spots in my image and all of the colours that are in those spots are added to the selected colours that will be changed by using the sliders.
But now, when I use the + it has exactly the same effect as not using it - I can only choose one colour or an other, I can't add.....I want to reset this to the original way that this works.
Currently I have to open the panel, change one variation of a colour, save it, then re-open the panel and do it again (and again and again) until all the colour variations I am trying to remove are are changed. I know I also have the 'fuzziness' slider, but it does not give enough control.
View 2 Replies
View Related
Aug 19, 2013
I am designing a T Shirt for my ski club.I have taken an image from a banner (made in illustrator, full colour image attached) and I want to devide into a 3 colour image for the t shirt (I am only allowed 3 colours for printing).The colours I want to use are black, white and purple. The colour of the t shirt is a light blue.I want to then put the purple logo on top of the white and black too.So I'm after a black and white grunge background with a punchy purple logo on the top.All of this should be on a tranparent or, for design purposes, light bue (same as T Shirt colour) background.
how to split a full colour image into using only 3 (4 including transparent/light blue background) exact colours.
If I were going to black and white I might convert to grey scale and then paint areas to fully white or fully black using an overlay brush I don't think this works for me for more than just black and white though.
I have attached two of my attempts where I used the colour range selection and level adjustments. Niether was really successful though (one does not use the right colours or number of colours but looks quite cool).
View 2 Replies
View Related
Dec 28, 2013
every time I use my Dell Printer and go into scanning and select 'scan to' and select Gimp as the image program. Gimp freezes for eternity on Gimp Startup and I HAVE to 'end process'!!! end task DOES NOT work!! how do I fix this while scanning directly into Gimp?
View 2 Replies
View Related
Aug 10, 2013
I will like to find out the colour code for the background colour on a particular web address. Unfortunately I am new here so not allowed to post links so will say this as creatively as possible. the address is theregentlagos (with the usual prefix beginning with w and suffix beginning with c for all websites). I am referring to the colour where the menu items like logo, home, brands etc are on.
View 1 Replies
View Related
Feb 25, 2004
I've been asked to convert an image to 2 colour for printing. I have the image as a full colour CMYK layout (with layers), but the whole thing needs to be converted to 2 colour. I have the pantone reference numbers for the 2 colours it is to be converted to. I am familiar with the hue/saturation tool, but this just seems to convert it to one colour, and you have no fine control over the exact colour you want.
View 3 Replies
View Related
Mar 17, 2013
I am running 2012 inventor ultimate and when I'm in assemblies quite often the screen goes blank and starts blinking or screen goes completely bright red. I have to force shut down and re-boot. I have discussed this with dell and they have replaced the video card, they have done patches updates etc. to no avail. My computer is an M6500 64 bit with a nividia graphics card running windows 7. very high end computer and very powerful. I am also using a 3D connexion mouse. I should also mention that the screen only blinks and crashes while undocked. While docked the only problem I have is locking up occasionally.
View 1 Replies
View Related
Dec 19, 2011
I have copied some colour negatives using my digital camera. What is the best procedure for removing the orange base colour of the film prior to converting them to positives?
View 9 Replies
View Related
Aug 11, 2013
How do I see the object selected change colour dynamically as I adjust the colour sliders?
It seems the object only changes colour when I release the slider. But I want to see it dynamically change, so I can find the colour that works best without "hit or miss" - "trial and error" behaviour.
Yes... I'm aware some of you spend hours in colour programs creating a palette to work with. Good for you.
I'm just wanting to do it LIVE. Dynamically. In 2013. In Illustrator.
View 4 Replies
View Related
Aug 17, 2012
I'm just started using inventor 2013 (from 2010) & the way colours/materials are applied has completely changed so I'm learning again from scratch.
Here's my issue: A customer has sent a casting to me in Parasolid format. When I open it, all the unmachined surface are blue & look a bit garish. However, the colours of the machined faces are ok & I wish to keep them.
So, I want to chage all the surfaces that are blue - I can use the picker & select all the blue faces seperately (by holding CTRL down & select each face one be one) but this is a pain & takes ages (there are over 200 faces)
I can see & edit the blue color in the manager but how do I tell Inventor to replace all - can it be done?
View 3 Replies
View Related
