The Samsungs splash screen gets to reading preferences but then says: cs6 has stopped running. I have deleted the prefs file to no avail. The samsung has a nvidia geforce 630.My uac has always been all the way down
View 4 Replies
Problems with 3D objects. PS freezes every time I create a 3D object and try to come out of 3D mode or save the file.
Updating driver for ATI Mobility Radeon HD560V display adapter.AMD website auto-suggested and installed HD 4650 (?) driver.That made PS work a bit better, but other stuff started freezing (Chrome, Bridge)Went to Dell site and reinstalled HD 560V. Had to uninstall and reinstall Catalyst Control Centre.
TECH INFO.:
C:UsersTed>cd Program FilesAdobeAdobe Photoshop CS6 (64 Bit)
C:Program FilesAdobeAdobe Photoshop CS6 (64 Bit)>sniffer_gpu
Device: 00000000006412A8 has video RAM(MB): 1024
Vendor string: ATI Technologies Inc.
[code]....
The AMD Mobility Radeon™ graphics driver supplied by the notebook manufacturer is customized for the built-in display and the features and functions specific to the notebook. It is recommended to use the drivers provided by the notebook manufacturer.Current: 8.713.3.2000
how I can make 3D work in CS6 on my laptop?
When I open an image in Photoshop CC 64-bit on my Dell XPS 15 L501x laptop with nVidia 420M GPU selected as graphics processor, the image is blank. If I go to the performance preferences and untick "Use Graphics Processor" the images are shown correctly after closing and reopening image (the same issue occurs with Basic, Normal and Advanced drawing mode selected).
I assume that Photoshop will run slower not using the graphics processor, so would like to sort it so I can use it to improve performance. If I remember correctly, on the trial version of CS5.1 on the same laptop, I just disabled OpenGL and the images were displayed fine. Is there any way to just disable OpenGL in Photoshop CC 64-bit (or resolve this another way)?
I would like to try Photoshop for digital art. I downloaded the 30 day trial version of Adobe Illustrator CS 6 about three days ago and noticed immediately that touching my laptop’s touch screen will only allow me to pan using the Hand Tool in Photoshop. I have never had this problem in Adobe Illustrator, as using the touch screen acts just as if I were clicking the left mouse button and dragging the cursor around the screen. I have a Dell XPS 15 - L502X laptop with an integrated touch screen (the entire 15” screen is Multi-touch sensitive). It is running N-Trig DuoSense Digitizer with the latest drivers. Is there some simple setting change that can be done within Photoshop CS6 to make it recognize a touch screen input as a normal left click and thus allow me to draw on it using the pen, pencil, or paintbrush tool? I find it quite odd that I have no problems with this in Illustrator CS6. Could it be that this tablet-like touch screen input is restricted on the trial version?
Here is a link to a youtube video that I put up showing the problem. The first program shown in the video is Adobe Illustrator CS6 using the Paintbrush tool. The second program shown is Adobe Photosop CS6 using the pencil tool. I draw the line in Ps using the mouse pad and then attempt to draw (still using the pencil tool) on the touch screen yielding only scrolling with the hand tool.
[URL]
Here's my system specs copy pasted right from PhotoShop.
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2494 MHz
[code]...
I recently bought a Dell 1720 laptop that had such a poor display that I
returned it. Can anyone here recommend a good Windows laptop for running
Photoshop and Illustrator.
when my pointer is in the drawing window, it disappears. when i move away to the ribbon or quick access tollbar, it reappears.
View 7 Replies View RelatedI have a laptop running LR 3.6 and want to try 4.4 to determine whether the laptop is man enough for the job. It's a Core 2 Duo T6400 2.0Ghz with 4Gb RAM and Vista Home Premium 32 bit.
If I install the trial version of 4.4 how do I make sure it doesn't mess up my 3.6 catologue, so that I can go back to it, if I'm not happy with the trial?
I want to try 4.4 against my full cataloque to make sure that I'm doing a proper performance test.
I am thinking of upgrading my PC, but only if the dual-core and quad-core machines will run Photoshop and Lightroom faster than a single core machine (which I have now). Does anyone know if Adobe has upgraded their software (CS3 and Lightroom) to take advantage of the multi-threading that's possible with multi-core PCs?
View 6 Replies View RelatedI have been a VS user for a long time now. I am currently using VSPro X5. I have an Intel Core i7-3770K overclocked to about 4.3GHz. I am running a little tuning utility program by intel to validate that when using VSPro X5 it is indeed utilizing only 1 core and about 19% of the CPU. This is irregardless of whether or not I am editing or encoding video. I have selected all of the hardware acceleration options and optimizations to no effect.
I also use MainConcept's encoder to render certain video and have validated that all 4 cores are engaged during the process and about 65% of the CPU is utilized.
I downloaded and installed the trial version of X6 and ran it and used it to process video with the same results as X5.
I am running 64 Bit Win7 Ult.
For the sake of comparisons, an AVI file converted to MPG (720x480, 1500kbps) is converted by: MainConcept at about 200fps VSPro X5 at about 30fps
I've got two Dell 2408WFP 24" displays due to arrive Monday and I was wondering if any of you owners out there have any suggestions for me. I understand I'll have to calibrate these puppies and definitely bring down the brightness.
Do you have any other comments or suggestions for a new owner and it's use with Photoshop?
slow issues and supossedly how to fix them (kapersky etc..). I have yet to be able to configure photoshop cs4 64bit to run smoothly..
here is my config...
Dell Precision Covet m6400
Vista 64
Quad-core qx9300
8gb ram
nvidia quadro fx 3700m 1gb
2x320gb 7.2k drives raid 0
cs4 64 should run like a dream on this machine... it doesn't..
What problems i get.
--------------------
General refresh issues, lag, panels done't minimise maximise smoothly, can't drag layers smoothly from one document tab to another. When i try and close the document tabs they take ages to close. When i open nvidia control panel in tandem to having photoshop open to see whats going on the animated logo jitters and does not rotate smoothly when i move my mouse over it...
What i have done to try and solve the issues.
-----------------------------------------------
Uninstalled and re installed numerous times.
Uninstalled and re installed Dell's nvidia driver and other drivers from laptopvideo2go.
Unistalled eset node 32 64bit
Changed gpu setting in performance menu...
CS3 runs ok though...
I'm looking purchase a Dell Precision - this one to be precise:
Dell Precision
With the specs below:
Vista® Business x64
Intel Xeon E5440 with riser (2.83GHz,1333FSB,2x6MB,Quad Core
ATI FireGL V7700
2 x 146G,(15,000rpm) SAS Hard Drives (one for a scratch drive) - I have an SCSI (SAS?) drive in work and it seems fast ([I]noisy as hell though![/I])
16GB, 667MHz, ECC Memory (8x2GB)
CS4 Master collection - educational
I'm pretty clueless about Processors and Graphics cards etc, (I just picked the one I could afford)so Quad core, dual core, more than one processor?
Would the 15,000rpm SAS be better than 10,000 sata?
Recently upgraded from Vista to Windows 7 and upon reinstalling my Dell AIO printer, it cannot find already installed Photoshop 7 software. No problem with Vista.
View 1 Replies View RelatedI have a Dell 1907 FP Flat Panel Monitor. The controls include a 'Brightness' adjustment. I am trying to set the monitor so that I have a luminance of between 100 and 120 cd/m2. I am using a Spyder 3 Pro display calibration device to set the luminance but the device does not measure luminance. Can anyone tell me what Brightness level my monitor should be set at to achieve a luminance of 100-120 cd/m2?
View 37 Replies View RelatedI recently changed pc and monitor causing a damn problem with those color spaces! My monitor is a Dell u2412m and by default it's setted on:
Now when I open a RAW file with ACR and choose sRGB as color space the result is this:As you can see, most of the photo presents black shadows. If I save the file and I open it with windows image it's perfect. Indeed, if I choose ProPhoto for monitor and for the photo the visualization is fine:
I must change the color space in sRGB or even RGB before save the final image so I really would like to se a real preview of it in photoshop instead of saving it first. So the problem occurs when I save to RGB (less artifacts) and sRGB (lots of artifacts!). I can't understand this because I'm using the same color space as default for my monitor.
The pc configuration is:Intel i7 3770
Ati HD7870 driver Ati 12.11 beta
RAM 16gb
i´m stuck with calibrating my Dell U2711(wide gamut) on Windows7, CS6 i used it with the integrated Adobe RGB preset and a standard profile. After calibration with i1displayPro (monitor in custom preset, slight changes to reach D65 whitepoint) i got a solid ICC2 profile which seems to fill the Adobe RGB space quite well (compared them in 3D).
The point where i can't get any further is the color rendering in PS and ACR, the colors are limited to a sRGB like saturation level. I´ve set my Creative Suite Color settings to aRGB, disabled Softproofing in PS.Here is what red (255,0,0) looks like: left: proofing OFF
middle: sRGB proof
right: monitor proof
I recently bought an Eizo CG301 and think it's awesome. I also have a Dell 2407 and run them both in a dual monitor setup.
I produce hi res digital fine art prints and I'm having issues with my colour setup......
This is the problem. Eizo (100cd,6500k,2.2gamma) is calibrated using an eye one display and saved in CAL mode....the dell(180cd ( the lowest it will go without lowering colour values), 6500k,2.2gamma) is calibrated using the same device and is using the profile via vista colour management.
Basically the Eizo shows 255,0,0 as a mid red/orange and the dell shows the same colour as a pure red - this is backed up with a printout from my epson 3800 where the reds are red and not orange. As I'm producing professional output it's essential for me to know which monitor is correct - do I trust the Eizo as it's hardware calibrated?
all other colours seem fine and my Eizo's deltaE values are between 0.2 - 1.3 (0.4 average)which is quite good....
can anyone confirm if 255,0,0 is a mid red/orange and not pure red.
I am using Windows 7 and recently installed Photoshop Elements 10. If the Dell 3000cn is set as my default printer, as soon as I click on print, I receive the mssage I need to install a printer.
I have verified that I have the latest Dell driver. If another printer is the default, I can print one image to the Dell printer. If I try to print a second image or change certain prnter settings, such as setting a custom size, PS Elements just show the waitng icon and never moves on so it has stoped working and I receive the following dialog box from Windows.
Does anyone know if Bridge in the CS4 version benefits from a dual-core processor?
Those thumbnails take a loooong time. Also, if it does indeed benefit from a 2-core:
1- Does it benefit from a 4-core over a 2-core?
2- And this is a value judgement: Money is tight but am i crazy not to scrape together $200 more to get a 4-core at this date and time even if Bridge does not [yet?] benefit from a 4-core? Do you, in the next 3 years think CS could be hindered by an old 2-core? I will probably get a 12MP camera next year and i often use multiple [3]HDR exposures and often multiple layers. [I already know to get 8GB RAM].
How to use the touchscreen on a desktop to draw with the brush tool in adobe photoshop elements? I can use the mouse to draw, but I cannot use the touchscreen. My touchscreen works well in Microsoft Paint so it doesn't seem to be a hardware problem.
View 1 Replies View RelatedDo i use back up, export or copy/move .i want to have just i merged set pf files with no duplicates and no omissions . then i will just run one version in organizer as its so much easier.
View 2 Replies View RelatedI can't decide between getting the Amd Dual-Core 64bit 4400 or the 4800 processor. Will I see a big difference in performance with CS2? is the price worth it? I plan to have 4GB of memory on the computer.
I currently use an AMD 32bit 3000 processor with 1GB of ram and the computer can barely handle the files created by my 1Ds Mark II. I add just one layer in CS2 to the file and its all over. My computer slows to a crawl.
It is stated quite clearly on Corel's website that Video Studio Pro X3 is "Enhanced! NVIDIA® CUDA™ GPU acceleration and Intel® Core™ i7 CPU optimization "
Post on this forum seem to indicate a serious problem and that users with i7 processors have to change their Bios settings each time they use Video Studio and disable one of the great features of this CPU, i.e. Hyperthreading. Is this true or only under certain conditions ?
I have a multi-core machine. How can I tell Inventor to use as many cores as possible?
View 6 Replies View RelatedMy laptop Dell Latitude E5420 is not recognising my camcorder. I tried with two of my mini DV camcorders, both of them are not recognised. When I connect through the IEEE1394 port on the laptop, it doesn't respond at all. In UL VS or any other video capture programs, the camcorder is not recognised, but only my laptop built in web camera is recognised.
Tried with changing IEEEE1394 host controller with Legacy in the Device Manager, but doesn't work.
I have X6 Corel on my Dell XPS. I cant move layers with "Shift+pg up/pg dn/home/End.
what shortcuts should I use?
Is it possible to have a line weight for the core of the wall that is different from the finish lines ! I mean assigning a different line weight for every component of the wall .
View 4 Replies View Relatedcan't use express tools commands because they forgot to click on install express tool, what is the reason that you have to click on it and Fusion is a part of autocad?
View 7 Replies View RelatedI need to snap witness lines to the core face (face of stud) and not the center of the wall or the face of sheet rock.
View 6 Replies View RelatedIs it possible to design a wall where the core boundary lines fall in the middle of a wall layer?
Case in point is a complex wall with an 8" foundation wall that follows a building line along its exterior face. Above that is 3'-6" of stone veneer/airspace/sheathing/6" stud/drywall. Above that is EIFS/sheathing/6" stud/drywall.
The design calls for an insulation gap between the slab and the foundation and for the top of the wall to be 6" above the first floor level. The 6" metal stud thus overhangs the top of the foundation wall by 1" on the interior side.
Ideally the floor would be flush and core would simply follow the studs but the building lines (controlled by the grid) control the placement of the foundation wall and no part of the upper wall lines up with the foundation wall. Even worse the exterior finish falls 1/2" inside the exterior of the wall below and there should be no line drawn there.
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
I have created several stacked walls in my model and I am to the point of dimesioning my walls. I am wanting to dimension to the centerline (core) of walls; however, when I try to dimension a stacked wall it won't give me the choice to dimension to the core centerline.
View 1 Replies View Related
