Inside Edit forums profile Inside Email Box,, when you select Yourself,, Dose that mean you are the only one who can see your profile such as the email address.Inside prview your profile when I select yourself,, when I click on preview the email still shows, but when I select Registered Users the email Dose not show.Is that because Iam Logged In? If I want the email to be private which box should be selected.
View 5 RepliesII cam unable to type a message in the email body when using Adobe Email Service.
I have my email sharing preferences in PSE 11 set to use Adobe Email Service. I successfully verified my email and I am able to send photos using this service; however, I am not able to edit the message that accompanies the photos. I can type in the address line and subject line of the email dialog box. But, I am not able to type in the body of the message. I would like to be able to write a personalized message. I believe that I was able to type a message in previous versions of PSE.
Type a custom message when using Adobe Email Service? If yes, how can I enable that feature?
A tabular data sheet for profiles could be very interesting.
Civil 3D (2013)
Trying to send photo by email attachment or photo email.
Had previously done the verification code thing and got the code and have been sending pics by photo email.Have got PS10 loaded to my Desk Top - main system and also my laptop .When trying now to send pics on my DeskTop I can get to the (maybe second) screen where you choose the size of the phots and then I get the Verification Code screen - which tells me that an 'initial verification code' will be emailed to the chosen email - but when I say continue, I go to the next screen of the Photo email and then when trying to send the phto email it locks up and says an unexpected error has taken place ...
I have sent some photos via the laptop but it seems to be very hit and miss at the moment.Also I have some problems opening PSE10 - When I click on the icon - I get the initial "organise or edit" screen where I choose organise - but then all that happens is this screen closes and the Organiser does not open. Most of the time I'm left with maybe shutting down my whole computer and starting up again and it works again.
I'm working in Civil 3D 2012 and I have an alignment going through 3 DI's and a MH. When I say to draw this in profile view the pipes end inside the DI sometimes. Not at the middle but inside it even though my DI has a near 0 wall and floor thickness. The place where the pipe ends is where the edge of the DI should be but it is being shown outside that for some reason. What can I do? I inserted an image. The piece that I drew that is supposed to be a DI in profile view is rotated wrong.
View 5 Replies View RelatedEditing someone else's file
They have a Square with an oval in the middle used as a clipping mask
When I click on the object, I can only modify the outside square, not the inside oval
What kind of a shape is this, and can I edit the oval? I don't use Illustrator much.
There are many examples of creating rectangular patterns, but not many, if any, of interrogating existing patterns.I have attached the files and a screenshot of a rectangular part inside an assembly. The part contains a rectangular pattern of holes and workplanes.how do I get hold of each proxy of the workplane in the pattern?In other words I don't know what to put in the for loop at the end of this code fragment:
If _invApp.Documents.Count = 0 Then MsgBox("Need to open an the assembly document") ReturnEnd If If _invApp.ActiveDocument.DocumentType <> DocumentTypeEnum.kAssemblyDocumentObject Then MsgBox("Need to have an Assembly document active") ReturnEnd If Dim asmDoc As Assembly Document asmDoc = _invApp.ActiveDocument Dim asmDef As AssemblyComponentDefinition asmDef = asmDoc.ComponentDefinition im occurrences As ComponentOccurrencesoccurrences.
[code]....
how to show the inside diameter of structure in plan and profile view. Do I have to make sump and wall thicknesses 0 to do so?
View 5 Replies View Relatedhow to create a hyperlink to email a PDF form to an email address. So the user finished completing the form fields and then wants to email the current form they just filled out in Acrobat and want to submit the filled out pdf to an email address that is listed on the document.
View 1 Replies View RelatedEmail Photos as Attachments from Lightroom 5
Is it possible to email photos as attachments (jpg), not embededed within email? Mac users report when they receive the email, photo is only embedded, there is no attachment so they cannot download.
Seems like Multi-View Blocks are like that hot red-head in high school that you really want to get to know until you get to know them.
I made a bunch of blocks for my electrical plans. Annotative symbols for plan view, 3D blocks for model view, and elevation blocks for elevations. I then started creating the MVBs.
Upon insertion the annotative blocks appear super small and the model view blocks scale way up. The model view blocks are not annotative and are not supposed to scale at all. It seems MVBs see any block inside that is annotative as an indication that the entire MVB shall be annotative. Fustrated, I finally found a work-around that is a bit half-arsed:
I made another block as a sort of holder for the annotative symbols that was set to not be annotative and inserted that into the MVB. VOILA! the MVB itself doesn't scale, but the annotative symbol inside the non-annotative block does. This works fine except for one caveat: I can't edit attributes that are in blocks inside of blocks. If I made another block to use in the MVB for the attributes, it would work, so long as I don't make it annotative, which isn't what I want.
So, A) is there a better work-around than the block-in-a-block-in-a-multi-view-block method, or B) Is there a way to access and edit attribute data of sub-blocks inside a MVB?
Maybe my next thread will be about red-headed Multi-View Blocks with carpets that match the drapes.
Edit: Running ACA 2009
I created a pipe network from a object (alignment wLpolyline) I want to set my inverts at the inside edge
of my SDMH not the center. I go into Edit Pipe Networks then the vista (table). I don't see a option to do that.
Is there a setting in the SDMH structure style or somewhere else?
As an example I come in at 6250.0 at inside a 48" MH and go out at 6251.0 at other side of MH.
I wanted to use a catch basin that shows the depressed curb & lip like the one in the Pipe Network Video
but it not in my parts Library even when I create a full parts list it still isn't there. Is ther a way to go on line and download part structures?
For a very long time I have missed to able to edit profile on a curved wall. It seems so basic and yet it has not been possible. So I was very pleased when it was pronounced that this basic option was finally possible in Revit 2012. Alas it is not. I am so very dissapointed because this is a basic feature wich should have been fixed years ago.
Any simple method to edit profile on a curved wall without having to attach wall top and buttom to invisible layers of floors and roofs ect.
I have a strange thing that all of a sudden started happening. If I Rt-Clk on a surface on a profile and select Edit Profile geometry, the dialog box comes up, but almost every option in there is greyed out!
This is not drawing-specific, not is it machine specific.
See attached pic.
See attached .pdf file.
I would like to delete the horizontal line (white line) from our sanitary profile structure. I have outlined it with a yellow cloud. I want to permanently delete it from our style. I can access the style in the Prospector but cannot figure out how to edit the block to delete the line in question.
I have a large number of profile views in Model space that I need to edit the Elevation values for all of them in the Profile View properties. Any way to select them all and edit the Profile View Properties? Maybe creating a group or something?
Civil 3D 2012
Win 7 Ultimate x64
Intel Core 2 3.2Ghz - 12MB RAM
Nvidia 8500GT Dual DVI
It seems like I used to be able to do this in 2012.
I created a design profile and used the copy profile command. I close the layout toolbar of the original design profile.
When i select the copied design profile to grip edit a pvi, the existing ground profile and copied profile disappears and i cannot grip edit.
I have also tested this with an OOTB template.
Question: How to be able to grip edit a copied design profile in 2012.
I was editing a profile yesterday and when I chose the grips, it offered me the station or elevation which I could edit. C3d crashed and now after 3 restarts, I cannot get the SE grips. I only get polar tracking when using grip edits.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
I have a finished grade surface and I have a feature line that is my waterline. I created an alignment and then recreated my feature line so they would be linked. I can then create a profile using my alignment and that shows my surface at that alignment. I can even add the waterline by using project objects to profile view.
I need to be able to edit the feature line elevations in the profile view by creating and erasing PVIs so this will tie back to my geometry.
AutoCAD Civil 3D 2012 SP4
Windows 7 (64)
Civil 3D 2013, trying to edit a FG profile through the Profile Entities vista and Profile Layout Parameters dialog box. All entities in the vista are shaded (locked) and will not allow me to edit. Is there something that I am missing here? I should be able to edit the PVIs (or entities) correct? I couldn't find anything in documentation as to why these are shaded and not allowing me to edit them.
View 5 Replies View RelatedI really enjoy this new draw inside feature in Illustrator. But, I find that it does not always work. It seems to be grayed out sometimes. For example, I have drawn a shape with my Wacom tablet using a blush. I then converted it to a shape instead of keeping it a stroke by expanding it. But it will not allow me to now draw inside of it, even though it is a shape.
View 8 Replies View RelatedI am trying to access the edit original (edit with) option to edit a photo that has not been edited yet. I right click and go through the edit menu and does not appear or is not available? Would I have to reopen it manual in photoshop or is there a way around this to access that setting? it sometimes does not appear on my already edited photos.
I would prefer not to open each photo again, as some files i do not have and were imported into the document with another computer.
I have a really large sphere and have put a camera on the inside to see the inside surface. I have used the normal modifier to flip the normals and so have the skin on the inside. Something is going very wrong at this point because I have this ugly shadow line that I cannot get rid of and I also seem to not be able to light this interior, when I use an omni light it makes no difference. Where am I going wrong?
View 7 Replies View RelatedI have this strange situation.. i use the Arial font inside my cad drawings and when i print my paperspace layout, the text inside the viewport is a little bit more "bold" then the text i put directly on paper space.
Maybe it's a trick to know what text is placed where, but i want all this to be uniform, same thickness. Is there a system variable to correct that issue?
See the image below: It's a 400 DPI scan from an impression i did.
Up to COUPE C1 is the text inside the viewport, under COUPE C1is the paperspace text. Both are the same height... but difference tickness.
I've been trying to reproduce this color blind conditionfor a long time now and I still didn't figure out how I can do this. I've searched for cluts but didn't find any, only this, which has some previews of them, but no any files I can load into Photoshop's Color Lookup adjustment. I've looked into Pixel Bender plugin, but I'm using CC so that doesn't work either... I've also tried it with the Index Color mode, but that really messes up my image as it has a really low color range (256). I've even tried reproducing the same effect with adjustments, channels, etc, but didn't figure it out.
Since there's a way to perfectly color proof images with this condition, I'm guessing this has to be some kind of ICC profile or something similar. Is there a way I can use it as a color profile?
How do you add a custom working space profile to the profile list in CS6.
View 1 Replies View Relatedthis file is tagged "c2" -- it doesn't trigger a profile mismatch warning -- why my working RGB is sRGB
View 9 Replies View RelatedFor a monthly magazine on uncoated paper, our workflow is as follows:
- convert every photo to uncoated cmyk (PSO Uncoated) + apply some corrections to look nice in this profile
- apply a fixed correction curve to the photo's
- (resize images + apply proper sharpening for print)
- export pdf: convert colors to destination, preserve numbers
The correction curve step is critical. Without it, everything is printed much too dark.Unfortunately our printer can't provide us with a correct profile for the paper that is used. That's why the correction curve in photoshop is needed.The profile + the correction curve give a good, predictable result.
However i don't like the workflow with the correction curve, because only photoshop links can be corrected.We would also like to put a digital version of the magazine online, so i have to replace all links if i won't to have them displayed correctly.
Can i somehow combine the icc profile with the correction curve into a new icc profile?I did some research and found about "Custom CMYK" in photoshop (see screenshot), but i think an existing profile (PSO Uncoated) can't be edited or replicated in this dialog box.
Assign Profile and Convert to Profile does not shows in Edit menu for PS CS3. How do I get those options displayed on the Edit Tab?
View 3 Replies View RelatedHow do I get pictures from photoshop to an email?
View 8 Replies View RelatedWhenever I open a picture in Photoshop, in the top left corner, there is always a 01 and a email graphic in the document.
View 3 Replies View Related