Is there anyway to setup photoshop CS3 so that you can drag documents around by selecting the top of the window, like you can in every other windows compatible application? You know like you could in every single other version of Photoshop?
I work on multiple documents at once and need to drag them around, CS3 does not allow you to do this. Being aloud to drag a window is no longer automatic. It requires way to much work I have to move the mouse over the leftmost small icon of the top of a window (which is usually obscured by the tool palette so I have to minimize that as well),
then I have click on the little icon, then scroll down to the move choice, now the window is able to be dragged - All these steps are talking way to long for working on multiple documents. Does anyone know of a way to just automatically allow a document to be dragged around in photoshop? The way it used to work in every other version up until CS3?
how do i open or drag multiple images onto the same window or blank background in elements 11? was easy in 2.0 as all images were available on same page. where is this option in 11?
All of the photos are square, clipped drastically from what they should be. From what I take, by doing instructions on how to do this, all I had to do was drag the iPhoto library into an open LR5 window.
In my Adobe Premire Pro CS6 project, When I select a clip that I want to drag down into the editing section it only allows me to drag the video and NOT the audio. I need both video and audio and it wont let me, I don't think I clicked anything wrong but
I have just installed my newly purchased PSC5 extended software. When I try to use the ACR it will load and I can use it but when I try to open, save or cancel my image I cannot. This is because the ACR window is too 'long' for my Sony desktop window and the buttons I am trying to access are in the 'shadow' of the desktop window. When I try to resize the ACR window to access the buttons it will let me adjust it on the vertical window edges but not on the horizontal window edges. I have to reboot the laptop to do anything at all.
As a new user I really prefer the single window mode but have a real problem in that every time I open a filter the window/box that open opens up underneath the single window and I cant see it without minimising the main gimp window. I've played with the preferences windows management options and seem to have all the file options curves etc on top now (these were opening under the single window at one point) but nothing I do seems to want to make the filter boxes open where I can see them - It's making GIMP quite unpleasant to use.
I modified a Window Family file by adding a Window inset parameter. When I inserted the window into a wall, otherwise the window worked fine, but when I changed the window's Window Inset value, the frame depth changed instead of the frame's location. The frame was originally made by Sweep tool, but now when I made it by Extrusion tool, the window works fine. Anyway, for future purposes, I would like to know how to be able to use the Window Inset parameter with a frame made by Sweep tool. How do I lock the depth of the frame sweep?
In the program window, it looks like its been pushed way in on the full image in the source window. No matter what I do, I can't get it to appear the same as in the source window...
I needed to have a 7-foot retractable banner printed and discovered my San Diego print vendor had dragged my InDesign .pdf into Photoshop and rastered my vector text and vector logos at 125 ppi and was going to print out of Photoshop.
I talked with their sales and graphics people for two days and specifically asked them in five different ways if they printed through a RIP (yes), and if I would get vector sharpness on my printed text and logos (yes). And I specifically requested they print directly from my .pdf and that they not alter my file in any way.
the person printing my job and she told me she had dragged my .pdf into Photoshop and would be printing out of Photoshop. She connected me with her graphics supervisor and I am not sure he even understood the difference between vector and raster, or my point about vector sharpness on the print.
I had asked their graphics person what profile to use -- she said CMYK and she didn't know what a profile was -- I dodged that question by having her open her Photoshop Color Settings and reading her working CMYK profile.
I called two other San Diego banner printing shops after that and the conversations were about the same.
In Photoshop CS4, when you drag an image to open it, the program opened in a new tab automatically. Since version CS5, in doing so, the software simply inserts the image on the tab that is already open. There configuring Photoshop CS6 equal to CS4 (when dragging an image, open it in a new tab)?
I am running Windows XP/Photoshop CS3 and for some reason I can not drag photos around on the screen. This is random as sometimes it works. I have tried everything except reinstalling the software. Which I would rather not do since I have a lot of add-on and plug-in's.
Here's what I have tried:
1. Reset PS preferences on the startup
2. I have used all the various Windows Screen modes using Shift-F.
I have updated to 10.3.3, after updating I can no longer drag a file onto the dock icon to open it, any suggestions, is it a 10.3.3 problem or did I turn something off that I am unaware of. It will launch the program if it is not open but it will not actually open the file.
When I open a file, it will also normally appear as layer in layer-palette. When I open a second file next to the 1st and try to move item from that file to 1st file, it can not be done.
I can move the item in it´s own file but I can´t drag it to another file. Layers do not merge under one window but stay in their separate windows.
I'm having a very strange issue with Photoshop CS5 (both 32-bit and 64-bit)
When I go to draw anything or move anything, the canvas does not respond to mouse events at all. Right clicking doesn't work, dragging edges of the free transform box doesn't work, even the top menu bar (File, Edit, View, etc) does not detect when I mouse over from one menu selection to another (e.g. moving the mouse from "File" to "Edit")
I installed CS5 and it will not allow me to click or adjust any layers on the canvas with my mouse. For example, I can open an image or project file, drag and drop something into the window to add the image as a new layer floating over the main layer. I can click and drag all I want nothing happens. Right click on the image....nothing happens. If I hit the arrows keys on the kb...the image starts to move around. If I select the selection tool nothing will happen when I click and drag around.
Adobe is completely inoperable on this system forcing me to have to use a friends PC to do anything with.
I have tried resetting the preferences on launch of the application...no change. I have tried uninstalling and reinstalling....no change. I tried uninstalling CS4, then re-installing CS5....no change.just re-install CS4 and stick with it until CS6 comes out (assuming I will be able to budget the expense).
I want to drag multiple adjustment layers, typically four with default masks but no masking has been applied, from one document to another. I have read several articles about this, but no method works reliably for me. I running CS6.
I've been working in PS CS6 a while now and notice a consistent behavior, different from previous versions: it does not recognize the first click, after choosing a selection tool from the tool panel.
Try this:Select "Rectangular Marquee" tool, using the tool panel.Move cursor over document and click-n-drag. The tool does not work. It must be clicked a second time to work. When selecting the tool using the keyboard shortcut, this does not happen.
I have a large psd doc several layers deep. I have a smaller sized psd file open.
I want to drag a layer from the large to the smaller one and have it resize. Much like if i have the option in prefs for place. I thought holding ctrl when dragging or other keys, but i can't seem to find a solution. I know there are a few other workarounds but they are all long winded.
Did i miss something here or is it just not actually possible to say drag a 4000x4000px layer into a 150x150 document and have it auto fit the layer, just as place would do if importing a file.
it did not do this at first and I can still drag items directly onto my canvas as smart objects but when I drag photos from LR into my PS thumbnail at the bottom, they appear so tiny, I can't even make them out. Clicking crtl/0 does not enlarge them, I have to press ctrl/+ several times to make them larger.
In Photoshop CS6, when you drag and drop an image you can drag the corners to resize. once you place it, this menu dissapears, i was wondering if there is anyway to get this menu back up without bringing the picture again?
Why can't I see my photo when I drag in on top of the second background tab? I have an online course and one of my assignments required us to change backgrounds. After following the video instructions precisely, I was not able to see my photo on it's new background once I dragged it onto the new background tab.
I'm having this problem since the last time I formatted my computer. Basically, when I try to drag an image into photoshop, the cursors changes into a circle with a slash in it (unavailable).
I can open files by right clicking and choosing "Open with -> Adobe Photoshop CS6", and I can also open with "File > Open..." (ctrl+O)
I've searched for a soltion for this and nothing worked. This is what I've tried doing so far:
- Resetting the preferences (ctrl+alt+shift) - Running with administative rights - Running without administrative rights - Making sure I have premissions for the files - Making sure the files are not set as read-only - Changing the scratch disk option (Preference -> Performance)
None of these worked.
Here are my PC specs: OS: Microsoft Windows 7 Ultimate 32-bit SP1 CPU: Intel Core 2 Quad Q8300 @ 2.50GHz RAM: 4.00 GB Dual-Channel DDR2 @ 400MHz Motherboard: Gigabyte Technology Co., Ltd. G31M-ES2L Graphic Card: 1024MB GeForce GT 240 (nVidia)
My Adobe PhotoDeLuxe was unfortunately deleted and I had to buy Photoshop, which is far less convenient for my needs. How can I drag and drop, or copy and paste, an image I have modified in Photoshop directly into another programme, in my case usually MS Publisher ?
Is there a way that, when I double click an image in My Pictures, I do not have to watch a long list of the people who designed Photoshop before I can actually use it?
I've been using photoshop cs6 Extended for almost a year now and never have had any problems with it. Recently however, I purchased a desktop with Windows 8, and when I reinstalled Photoshop on that, I have had problems since. When I move to drag something onto photoshop (Whenetheir it's from the internet or a folder on my Computer), A black Stop icon that represents my mouse refuses to let me. I can still open files normally with the "Open" tab in Photoshop I've already tried the following:
Running as both adminstrator and non-adminstartor Made sure "Clip thumbnails to document bounds" is checked" Resetting Photoshop Preferences Made sure none of files I wanted to drap and drop were "Read only" In addition, When I'm moving files, the background for some reasons flickers My OS is Windows 8 and my Version of photoshop is cs6 extended.
Trying to simply drag one image onto another to add it is a layer. PS will not let is happen, both images are jpg - RGB 8 bit. When i try to deop the image onto the other one, I get a blue line outlinging to windows, but the image will not 'merge' and it just bounces back to its own window.
