In Photoshop CS4, when you drag an image to open it, the program opened in a new tab automatically. Since version CS5, in doing so, the software simply inserts the image on the tab that is already open. There configuring Photoshop CS6 equal to CS4 (when dragging an image, open it in a new tab)?
View 3 RepliesSelecting (in grid view) dragging and dropping image to a new folder copies, not moves image. I want image gone from first folder. It works like that sometimes, but not all athe time.
View 10 Replies View RelatedI am running Windows XP/Photoshop CS3 and for some reason I can not drag photos around on the screen. This is random as sometimes it works. I have tried everything except reinstalling the software. Which I would rather not do since I have a lot of add-on and plug-in's.
Here's what I have tried:
1. Reset PS preferences on the startup
2. I have used all the various Windows Screen modes using Shift-F.
3. Check for updates online.
Trying to simply drag one image onto another to add it is a layer. PS will not let is happen, both images are jpg - RGB 8 bit. When i try to deop the image onto the other one, I get a blue line outlinging to windows, but the image will not 'merge' and it just bounces back to its own window.
View 2 Replies View RelatedIs it possible to get rid of the frame on an image and still drag it?
View 4 Replies View RelatedIve tried to drag an image to my photoshop workspace, howver when I try to do so it instead creates a new window of its own.
View 1 Replies View RelatedWhen I attempt to drag the image onto the "other" canvas (that has text) my red background on the "other" canvas goes black. I'm assuming it has something to do with the layering of the image I am trying to drag...but I can't seem to figure it out.
View 6 Replies View RelatedI'm using Photoshop CS6 and when I drag and drop a color image from one screen to another, all the color disappears and the color image becomes B&W. Additionally, when I tried to use my brush tool to color the B&W image, the only color that works is gray - even though I used the color picker to select an exact match brush color.
View 4 Replies View Relateddrag the image INSIDE a selection, like with MSPaint? I find it really ironic that I can't find anything on this, since it seems pretty straightforward. I've used other editing software before, and it had a 'clipping' option, but I'm not seeing that anywhere here.
View 3 Replies View RelatedI'm running PS CS3 on Mac iBook with 10.5.8
I've been using this setup for years & have always been able to drag out the right bottom corner to increase the grey space round an image so i can transform better or what ever. But now when I try to drag out that corner the image window flinches slightly & a line appears around the image which disapears when I let go.Also when I try to expand the layers palette down by dragging it's lower right cornes so I can see more layers nothing happens, there is no stripey corner marks on that corner & when i try click & try to drag nothing happens.
I want to know if it's possible in CS3 to drag an image file from Windows Explorer into an already open file in PS. Right now when I drag over, it opens that file. I want to have it where the image is inserted as a new layer into the existing open file. is that possible?
View 2 Replies View RelatedWindows 7 - 4 gig RAM I use expert mode hand tool is selected, but it will not drag image. I can vertical scroll with mouse wheel. I cannot select scroll bar handles,but I can scroll by clicking blank agacent space. I have reset preferences to defaults but no change.
View 1 Replies View RelatedHow does one drag an image on to a blank page?
View 1 Replies View RelatedWhy is it when i drag one image from the bottom panel over to another picture(solid color) i will only get 50% of the image and not the full image. Same thing when i copy and paste that image over the gray solid colored image also i will get only 50% of the image. The original image of the cat(full view) is about 24.79% and picture is 11.733 x 15.644 in size. the other image (solid color) is at 43.63% or 6.667 x 8.889". size is in inches. Do i have to resize the images and if so how as i am a stupie in this matter. The images are aligned side by side on the main panel or display.I am trying to place the cat over the gray background image and with a layer mask delete the present baackground of the cat to uncover the gray of the bottom layer.
View 9 Replies View RelatedIn Photoshop you can "drag" horizontal/vertical guide lines out into the image.
Can you do this in Photoshop Elements Editor 6 for a Mac 10.5.8?
I do what the help button and menu tells me but I can't get it...
I upgraded from PSE 10 to PSE 12 this week and am confused about a change in behavior.
I create a large blank document (3600x3600 pixels, scrapbook size) and then drag other items onto it to create new layers.
In PSE10, the items I dragged in kept their original size. In PSE 12, they get resized to match the size of the document I'm dragging them on to.Is there a setting I need to change? Can't find it.
When I try to drag an image out of project bin to an image in the workspace my program crashes. I have reinstalled the program but still doing this. All updates are done and I'm at a loss as what to do.
View 5 Replies View RelatedI have two documents, both with 300 DPI. The first is a 4x5 image and the second is an 11x17 page. I am trying to drag the entire 4x5 image (it's composed of several layers) onto the 11x17 page and keep it the same size. However, when I drag and drop, the 4x5 image is enlarged to fill the full width of the 11x17 page. This happens even if I hit shift. I recently upgraded from PSE10 where I did this regularly and can't figure out how to do it in PSE12. I have an iMac with OS 10.8.5.
View 11 Replies View RelatedWhenever I drag an image off the web into Photoshop it seems like some colors gets pixels, large black areas inside the image. This only occurs in 8-bit mode, when I turn the image to 32-bit it show all colors correctly. But in 32-bit mode I cannot save to web. If I finish the image in 32-bit and then downgrade it to 8-bit, the black parts return.
What I see in 8-bit mode:
What it should look like, and does in 32-bit mode:
If you need any technical specs apart from knowing that I use Photoshop CS5,
When I try to drag an image into a project in GIMP 2.8 nothing happens. I read in the manual to drop images into the space above the toolbox with the GIMP logo in it, but that doesn't work either.
View 2 Replies View RelatedIn my Adobe Premire Pro CS6 project, When I select a clip that I want to drag down into the editing section it only allows me to drag the video and NOT the audio. I need both video and audio and it wont let me, I don't think I clicked anything wrong but
View 2 Replies View RelatedI have just downloaded Gimp on my iMac and when I drag an image onto the Gimp screen Gimp just disappears.
View 1 Replies View RelatedI'm using Gimp 2.8.2 on Linux. I've configured the UI to single-windowmode and have opened multiple images, each with a tabbed display.
It is my understanding that I should be able to grab a layer from oneimage and drag-and-drop it onto the tab of another image in order toappend a copy of that layer in the new image. I have not been able to dothis. I'm grabbing a layer from the layers dialog and dragging it to the tab-thumbnail, but the layer is not copied to the new image.
A couple of comments for the UI designers:
* I find the [X] icons on the image tabs to be a real problem getting accidentally selected and dismissing the image when attempting to quickly select another tab. I would prefer another tab dismissal method such as right-click-menu close.
* Some user control over the tabs would be good. For example, I would like to see the the vertical height of of the tabs be smaller and have the option of displaying file names and/or icons.
when it comes to graphics editing. I want to distort an image by dragging a point around, resulting in the image being stretched or pulled by that point. I'm not seeking the stretch/distortion, as much as the movement of bits of the picture.
For example, imagine a smiley-face. I want to click and hold the mouse button on the end of the smile & then pull down to below the center of the smile. Do that again for the other end of the smile. Result = a 'frownie-face'.
Is there anyway to do such a thing with Paint.NET, or an existing plug-in?
sometimes i like to insert image into a Dwg. In 2012 i use to drag and drop the image from the source folder to autocad screen then i had the insert instructions, scale, position etc.
But i can't drag and drop images anymore in 2013, i have to use _imageattach icon to open the open manager then select an image.
Is there a way to reactivate the drag and drop feature in 2013 ? Must be a Variable to autorise that.
Did 2.8 remove the ability to drag and copy a layer from one image to another? This does not work when I try opening more than one image and dragging a layer between the two images by switching between tabs.
Is there some default box I need to uncheck or some new way to do this?
When dragging and dropping an image from FF 20/21 into AI CS6, it forces elements on the art board to be displaced.The image dragged into the app will plop into the middle of the art board, and anything in the file just gets moved.
Where it gets moved to is inconsistent- but it appears to always move on a diagonal.
I can't seem to click and drag an image with the mouse when using Full Screen Preview under the Edit Tab.
I see the hand icon and the scroll bars when the whole image can't fit on the screen but when I left click it's like I hit the Esc button.
Clicking the scrollbars will work but isn't as convenient. Under the Manage tab it works correctly. I have reset the workspace with no luck.
I use this feature a lot and would like to know if others have this problem.
The problem existed in X5 SP2 and now X5 SP3.
I know how to do it in Photoshop, but I can't figure it out in Xara...I have Xara Designer Pro 7 BTW...
View 3 Replies View RelatedI needed to have a 7-foot retractable banner printed and discovered my San Diego print vendor had dragged my InDesign .pdf into Photoshop and rastered my vector text and vector logos at 125 ppi and was going to print out of Photoshop.
I talked with their sales and graphics people for two days and specifically asked them in five different ways if they printed through a RIP (yes), and if I would get vector sharpness on my printed text and logos (yes). And I specifically requested they print directly from my .pdf and that they not alter my file in any way.
the person printing my job and she told me she had dragged my .pdf into Photoshop and would be printing out of Photoshop. She connected me with her graphics supervisor and I am not sure he even understood the difference between vector and raster, or my point about vector sharpness on the print.
I had asked their graphics person what profile to use -- she said CMYK and she didn't know what a profile was -- I dodged that question by having her open her Photoshop Color Settings and reading her working CMYK profile.
I called two other San Diego banner printing shops after that and the conversations were about the same.
I have updated to 10.3.3, after updating I can no longer drag a file onto the dock icon to open it, any suggestions, is it a 10.3.3 problem or did I turn something off that I am unaware of. It will launch the program if it is not open but it will not actually open the file.
View 1 Replies View Related