Why can't I see my photo when I drag in on top of the second background tab? I have an online course and one of my assignments required us to change backgrounds. After following the video instructions precisely, I was not able to see my photo on it's new background once I dragged it onto the new background tab.
View 2 RepliesI try to put it on the blank canvas and it won't. Nothing pops up saying it can't. It just won't go on the canvas.
View 4 Replies View RelatedTrying to drag an edited picture from photobin in Elements 12 onto a blank documents. Elements is resizing my photo to fit the blank document. I don't want it to resize. I want to drag and drop multiple photos onto a new blank doument as I have in other versions.
View 1 Replies View RelatedEvery once in a while I print that has two side-by-side images on one piece of paper. My usual routine is to create a new document that is larger than the two images--say, 10x8 (horizontal) with a transparent background and the same resolution as the two images that I'll be placing on the canvas (say, two 4x3's). Then I simply click on the image I want to move and drag it from its layers palette onto the blank background canvas, and move/edit/size as needed.
when I drag an image over to the blank canvas, it assumes the size of the entire canvas. so I just have the image... enlarged. With no background canvas. when I click on the new image (the one dragged to the canvas), all of the editing commands are grayed out. So I cannot resize or move it.I'm on CS5 (mac)
I have elements 6. My problem is I have had a logo made for me to use on my photographs, I was told to open both photos, and then drag the logo on top of the photo position it where I want it then flatten the image.I have tried this but it doesn't work, I have made a watermark myself before, saved it and then added to a photograph with no problems
View 7 Replies View RelatedAfter updating to Photoshop Elements 12.1, the move tool can not be used to drag and drop one photo onto another (when more than one photo file is opened).
View 3 Replies View Relatedhow do i open or drag multiple images onto the same window or blank background in elements 11? was easy in 2.0 as all images were available on same page. where is this option in 11?
View 3 Replies View RelatedI upgraded from PSE 10 to PSE 12 this week and am confused about a change in behavior.
I create a large blank document (3600x3600 pixels, scrapbook size) and then drag other items onto it to create new layers.
In PSE10, the items I dragged in kept their original size. In PSE 12, they get resized to match the size of the document I'm dragging them on to.Is there a setting I need to change? Can't find it.
I drag a photo onto the workspace but it is situated too low and only the top half shows. Am I doing something wrong?
Windows 7 Professional 32 bit Screen shot.JPG (75.48K)
Number of downloads: 4, Gimp 2.6 and now Gimp 2.8
I am trying to drag and drop a photo into my current project and it is coming in far too large - i try to re-size and it disappears
View 2 Replies View RelatedIn Lightroom, adjustments made to a photo replace the original version in my Library. When I drag the developed photo to external applications (Gmail in the browser, for example), Lightroom gives me the original photo, not the developed one, even though I can't see the original.
Is there a way to drag the developed photo from Lightroom, other than exporting and saving a new copy to my hard drive?
I am using Windows Vista, and I am trying to drag and drop photos from Google images into CorelDraw. I can do it from IE no problem. Chrome is only dragging in the URL text of the image an not the actual photo.
View 2 Replies View RelatedCorel Photo Paint X4.
I have an object with a clip mask.I post a new object.
How do I drag the clip mask existing in the new object?
I tried to drag with the mouse, but it closes the program.
removing a background from a photo.
For example, remove the grass from this photo:
Make it look like this:
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
I am trying to change the background of a photo. Not just change the color but change the color AND make it keep it's original shading, etc. I have some family photos we had made recently and they used a beige color draping for the background. The ones we had made before had a black draping. I was wondering how I could go about using some sort of additive coloring to transform the varying shades of beige to the same varying shades of black.
I have already used the masking tool to separate the background from the rest of the photo.
In my Adobe Premire Pro CS6 project, When I select a clip that I want to drag down into the editing section it only allows me to drag the video and NOT the audio. I need both video and audio and it wont let me, I don't think I clicked anything wrong but
View 2 Replies View RelatedHow to set the photo as the background?
View 3 Replies View RelatedHow do I remove the background of a photo and "save" the remaining subject(person) using Windows?
View 4 Replies View RelatedI'm creating a collage of photos (mockup, right now). The background on which those photos will be added as layers is at 100 dpi.
When I copy a 300 dpi photo that shows up on my screen at 100%, and paste it on the background (also viewed at 100%) — I would expect the 300 dpi pasted photo to render on the 100 dpi background at a 300% ENLARGEMENT... But it shows up at the same size it was rendered in it's own window... That doesn't make sense to me... Am I suppose to first lower the resolution of the 300 dpi photo to 100 while enlarging it's physical size 3 times?
I'm on a Mac 10.8.2 w/ CS6 13.0.
This is one of the tutorials that seems very straight forward(except for a couple typo's) but when I try it, I'm told the file could not be copied to clipboard because it's too large...however it does appear to paste the car over the bottom photo? Or did it?
"First open one of the shots in PhotoShop and select the entire image by pressing Ctrl-A, then cut or copy the image into the clipboard (Ctrl-X or Ctrl-C, either will do the trick), now close this image ... without saving ! Very important, we don't want to change the original image file, you never know you might need it again in the future.
Now create a new document (Ctrl-N) and just click 'OK', no need to change any of the settings, they are set to the content of the clipboard anyway so I can leave them 'as is'. Once the blank document is there hit the Ctrl-V to paste the first image into place. Time to open the second exposure, again Ctrl-A to select the entire shot, cut or copy the image (Ctrl-X or Ctrl-C) and close this file again (Ctrl-W)... do NOT safe the changes to keep the original image intact !
With this second image closed again I am automatically returned to my new document that already contains my first exposure, just hit Ctrl-C to paste the second exposure on top of this one and I'm halfway done already. The order of these shots isn't really that important, you will be exposing parts of one shot into the second one, which one lies below doesn't matter anyway."
Let's say the screen shot below is workable, if not I'll do it the correct way BUT how do I make the brillant layer masking work from here. Everything I've seen says to select the mask, then select the brush, then type of brush, make sure white is the foreground and black is background and just paint. When I paint nothing happens to my images?
Then I've tried going to File>Scripts>Import as Stacks and this seems to bring them in but w/ transparent layers underneath,
I would like to know how to delete a background from a photo and replace it with a different colour.
View 1 Replies View RelatedI want to do a photo gallery (like the ones you do in photo shop) but I want to add my own background.
View 1 Replies View RelatedI have this photo (hand1, attached below) and I would like to sit it on the attached background without the white part of it.
how I can do this? I use fireworks but I guess it is pretty much the same as in PS.
I am working in Photoshop Element 6 and am also having problems with removing my background. The photo is a picture of me with an off white color wall behind me. I read the post from January of someone having the same problem and I tried to follow each of those directions but have been unsuccessful. I am more familiar with Paint Shop Pro but can't for the life of me figure out how to cut my photo out of the picture.
View 1 Replies View Relatedworkflow problem when dealing with a composite, selection and background layer. My normal workflow is to start of in LR4, and if need be do an "edit in, CS6". I am relatively new to CS6, so bear with me.
I have some portraits I want to put different backgrounds on. I am using Matt Kloskowski's Layers book and Composites books written for CS5. I also have Martin Evening's book on CS6 and the workflow for doing a composite is pretty much the same. The catch is that none of them start off in LR with the original photo. They all describe the following basic workflow pattern:
1. Bring up the main photo in CS using "edit in CS6"
2. Change the photo from a background layer to a regular layer
3. Make a selection.
4. Make a layer mask
5. Refine the edge
6. open the background photo you want to place the selection in (steps 4 and 5 are sometimes reversed so you are refining the edge on the new background)
7. copy and paste the original photo onto the new background
8. Refine the edge if not already done
9. Save and exit back to LR with the composite
If I follow this procedure I run into a couple of problems:
1. My backgrounds are in a separate folder on my computer and not cataloged in LR. So, if I open them in photoshop and paste the original photo onto that image, LR will not know that I want to take the new composite back to the original folder along with the portrait. If I go to save the image, CS want to take the composite back to the folder on my computer where I got the background from. I tried playing around and tried renaming the composite similar to the naming convention I use for my photos in LR and then importing it into that folder after I have saved it in the background folder. This had some unintended consequences. First, I had trouble renaming the composite photo. For some reason Windows kept plugging in an old photo file name from one of my photos taken two years ago. After I discovered that I could work around it. But after the first composite finally got into LR, when I tried to do it again, the import button on the left side of my LR went dark and I couldn't import the second composite photo I was working on. This could have been a coincident and unconnected LR glitch, but I have never had that problem before.
So...I was thinking of modifying the workflow to the following:
1. Bring up the main photo in CS using "edit in CS6"
2. Change the photo from a background layer to a regular layer
3. Make a selection.
4. Make a layer mask
5. Refine the edge
6. open the background photo you want to place the selection in
7. copy and paste the new BACKGROUND onto the original photo
8. Move or make the new background layer THE "Background" layer
10. Refine the edge
11. Save and exit back to LR with the composite
I am envisioning this will ensure that my composite will wind up back in LR because it is still keeping track of the original photo which now has gotten the new background, regardless of what the file name of the new background was.
I have here an image of a good family friend , replace the background of this photo to something more studio-like... like a cloth backdrop, or something that will naturally flow well with the portrait image (also with the chair remaining in the image ).
View 5 Replies View RelatedI'm moving pictures of people onto a backround of flowers and plants. I've used the magic wand and polygonal lasso to get the people on to the backround. That works fine, except the backround near the persons hair shows up as a halo or line around them or I see the backround between the starnds of hair.
How do I have the person show up on the backround without lines or the backround from where I moved the person from. I hope this makes sense., I'm using CS4
I'm trying to import a photo created in photoshop with a transparent background to Adobe Flash and I'm getting a noticeable halo around the photo. This is exported as a PNG-24. I've tried going in to the photoshop file and taking off a little bit, but it still gives me the same outcome. I've also tried exporting as a GIF, and a PNG-8 with a matte. No matter what I do, it leaves the halo.
View 3 Replies View RelatedHow do I take a black and white photo and turn the background white into a color of my choice? I know that I can change the foreground (black) with monotone, but I want to change the white (inverting the image would just invert the problem, so it's no help). The text is too complex to mask or fill bit by bit. There must be a simple way to convert white to another color, but I am at a loss. I would be happy to include a file
View 11 Replies View Relatedneed to make a photo faint, like a background, but even after text is written over it, the photo can still be seen.
View 3 Replies View Relatedhow i would remove a background from a picture, and turning it white, leaving only the person in the foreground unchanged. I can think of some pretty simple ways, but im looking for a way that makes a seamless transition from the orginal person in the picture to the white background without any jagged lines.
View 5 Replies View Related